Latest ammunition empty box scrap Tenders | Government ammunition empty box scrap Tenders

Central Government/Public Sector

CTN :41991302

17 Oct, 2025 NA

Chennai - Tamil Nadu

Tender For supply of traction lever to drg. no.45505006 col i, alt 'c'--(rcf pl.no.33500551). special condition : item to be packed in polythen bags and in suitable size wooden pallet. 1)all polythene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)each polythene cover must have identification label with list of items inside. 3)each wooden box shall be stenciled or rigidly nailed with identification label. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :42211192

24 Oct, 2025 15.00 Lacs

Ghazipur - Uttar Pradesh

Tender For supply of vocational trade equipment dios e e--applicator brush , hydraulic chair eith footrest , blackhead remover , body massage bed , bowles , curling iron curiling tong , cutting scissors , decorative pins boxes , wax heater , dustnin , exfoliation machine , eyebrow pencil sharpener , facial steamer , foot scraper , foot spa , galvanic machine , hair brush , hair connector , hair dresses chairstool , hair dryer , hair steamer , hand mirrors , infrared lamp , jumbo rollers set , large stools , magnifying glass , make up palate , manicure pedicure set , manicure table , measuring cup and spoon sets , measuring glass sets , modular mirrors , paraffin heater , perming cap , pin curl clips boxes , rozer with blade , roller brush set 5 in 1 , shampoo unit , small scissors , small stools , spatula , spray bottle , sterilizer , stone therapy set , straightening iron , hair dey brush coloring kit , tweezer , working and facial trolleys , writing board with stand with white board marker and duster , all in one eyelash brushcomb , all purpose comb , barber brush , bleach brush , complete make up brushes set , cutting sheets , frosting cap , nail paint , tissue box , hand sanitizer , garbage binbages , mop , large tooth comb , ladieskids cut catalogues , eyebrow thread , wax strips , cold wax , paraffin wax , massage cream , pedicure scrub pack , pumic stone , manicure and pedicure shampoo , hair shampoo , hair spray medium hold , nail paint remover , nail base coattop coat , cotton wool , bob pin u pin invisible pin , stuffingdonut , rubber bands , barber razor , lipstick pallet , blusher pallet , eye liner , mascara , cleansing milk , mosturizer , face pack , face scrub , bindi assorted , makeup primer , gown , apron with front pockets , towels full size , disposable hand gloves , medium and small hand towell , physiological charts , analyzer machines , seize fire extinguisher , first aid kit , iron almirah ) /bid number : gem/2025/b/6634150 * /dated: 09-10-2025 & & / bid document 1 / 56

State Government

CTN :42226052

28 Oct, 2025 NA

Bhubaneswar - Odisha

Tender For supply, installation, testing & commissioning of training equipment & tools pallet jack , picking trolley with side ladder , order picking trolley , electric forklift truck , electric reach truck , mock-up steel container & ramp , warehouse selective racking , guard rail , safety shoes , bollard , safety helmet , safety vest , traffic cones , teaching aids (dg charts, atlas,container chart) , warehouse long span shelves (dim: 2500mm (h) x 500mm (d) x 1500mm) , guard rail(perimeter) , carton box (assorted) , tape holder , wooden pallet , compressed wood pallet , compressed paper pallet , plastic pallet , metal drum (200 l) empty , pallet mesh , electronic counting weighing machine , electronic counting weighing machine (table top) , strapping machine , automatic strapping tool , impulse sealer , strapping hand tool , drum gripper , fork extension , wooden crate , plastic drum , plastic chain , labelling printer , rfid / bar code reader , plastic tote storage box (dim: 400mm(l)x 500mm(d)x220mm(h) , plastics multi- purpose bin (dim:150mm(l)x230mm( d)x125mm(h) , 2-door full-height steel cabinet with cross bar & lock , round convex mirror , road safety signage , first aid kit

Central Government/Public Sector

CTN :42201210

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of set of control arm, as per drawing: medha drg. nos 1) da675uv2-135408, rev-02 -1 no, 2) b-a675uv2-135409, rev-00 -1 no, packing instruction: 1. each control arm upper to drawing no. 1277122, control arm lower left to drawing no. 1267716 and control arm lower right to drawing no. 1267717 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. all machined surface shall be protected from oxidation and corrosion by applying suitable two coats of rust preventive oil. 3. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 4. the control arm upper should be packed in 08 nos in one iron boxpallet (returnable) / wooden box and lower control arms 08 nos. ( 04 lower left + 04 lower right) in second iron box pallet (returnable) / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 5. each packing should havean identification showing p.o. no., pl no. description, drawing no./spec., quantity, firm's name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. [ warranty period: 30 months after the date of delivery ]

CTN :42139834

23 Oct, 2025 2.19 Crore

Raichur - Karnataka

Tender For construction of proposed 50 tpd mrf centre material recovery facility of machinery phase 1 at raichur city - fork lift 3 stage full free mast 4500mm mast lowered height 2100 mm without back rest 1500 mm long forks 1070 mm front & rear solid tyres rear view mirror,right and left sides standard seat with safety belt load backrest overhead guard turn signal lights rear lights buck-up buzzer standard tool kit electronic rotating flashlight (yellow), skid steer loader skid steer loader bull bull skid steer loader - av490 equipped with std bucket, powered by kubota - 49.5 hp 4 cylinder liquid cooled diesel engine, hydrostatic drive with hydraulic pilot operated variable displacement tandem pump with heavy duty.the rate includes the cost of transportation, supply, 1 year insurance, rto charges, gst & any taxes if applicable., semi electric stacker semi electric stacker (1000kg) semi electric stacker capacity 1000kg, mast type telescopic, fork length 1150mm, fork outer width 560mm, load center 600mm, lowered height of fork 90mm, lift height of forks 200mm, shut height of equipment 1600mm, overall length of the equipment 1850mm, overall width 850mm.the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable., weighing scale essae ds 415n 1000kg capacity 1000 x 1000mm platform, frame moc ms, platter moc msc, connectivity rs 232. the rate includes the cost of transportation, supply, installation and gst including any other taxes if applicable, pallet truck - 2500 kg pallet truck (2500kg capacity) detailed specification. the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable , bag opener base frame length 2000mm rotor diameter 600mm width 1000mm pulley dia 500mm rotor blade angle 45 deg.outer shaft 100mm blade nos 50 q blade thickness 25 mm (high carbon steel) outer hopper cover 3mm ms material out let screen 1000x 605mm hole, stand 100 x100 mm ms pipe, gear motor 15 hp (crompton)the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable., ballistic separator ballistic separator detailed specification in annexure-3(detailed specifications have to be entered) (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), transfer conveyor- underground & inclined m type conveyor 65 ft transfer conveyor 65 feet with adjustable speed motor.detailed specifications if applicable have to be entered.(the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), magnetic separator model of machine dcc-c1000 width of belt 1000 mm fabric of belt nylon - nylon 400/4 ply grade m-24(top rubber 4mm bottom 2mm) belt thickness 10 mm thick impact idler spacing 250 mm type of conveyor v type ( idler arrangment) motor and gear box branded /imported motor hp. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), horizontal baler machine horizontal baler. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), vertical single box baler - 50 mt capacity vertical single box baler 50 tonner. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable) , pvc inclined belt conveyor 25ft - 7620 mm pvc inclined belt conveyor 25 feet detailed specification.(the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), pvc flat belt conveyor 45ft (mezanine floor) for secondary sorting pvc insulated belt conveyor 45 feet (mezzanine floor) pvc flat belt conveyor (mezzanine floor) dimension 15250 x 800 x 800 4500 lbh ss

CTN :42122146

11 Oct, 2025 NA

Nagpur - Maharashtra

Tender For supply of shell packing box (wooden pallet with woodworm preventative coating) to drg no. sm-1319c

CTN :42058297

07 Oct, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of store shelter with pre fabricated structure , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 63 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts size 1.5sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts size 4 sqmm single core , cable pvc insulated electric cables heavy duty1100 volts size 2.5 sqmm single core , pvc casing capping of size 1 inch medium grade , pvc casing capping of size 3 oblique 4 inch medium grade , led tube light fittings 18 oblique 20w , screw full thread 6 x 19 mm isi marked 200 nos , pvc switch boardsize 7 x 4 inch for sockets and switches , pvc switch board size 8 x 10 inch , pvc l bend and t junction joint for pvc , switch socket combination multipurpose 15 amp 230 volts , switch socket combination 5 amp 230 volts , service cable pvc insulated aluminium conductor 1100 volt grade heavy duty , ceiling rose three terminal , led bulk led lamp 10w , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round or squire block , fire extinguisher of one kilogram capacity dry power , main switch 32 amps 4 pole tpn , wall mount fan 600mm sweep metal body , turbo ventilator non power driven auto rotating ss body of size inner ring 610mm and 6mm thick , af 30d diesel operated forklift truck for lifting pallet lifter of capacity 5hp lifting capacity wt upto 3t , earthing plate 600 x 600 x 6 mm galvanised steel , ci earth pit cover of size 300 x 300 x 6 mm with angle iron , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe , gi wire 4 mm diameter , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , individual standalone plastic body smoke alarm , individual standalone plastic body heat alarm , fire ball extinguisher of 1.3 kg wt with suitable provision

State Government

CTN :41834443

08 Oct, 2025 NA

Bhubaneswar - Odisha

Tender For supply, installation, testing & commissioning of training equipment & tools for setting up of logistics & supply chain management facility - pallet jack ,picking trolley with side ladder ,order picking trolley ,electric forklift truck, electric reach truck ,mock-up steel container & ramp ,warehouse selective racking, guard rail ,safety shoes ,bollard ,safety helmet ,safety vest, traffic cones ,teaching aids (dg charts, atlas,container chart) ,warehouse long span shelves (dim: 2500mm (h) x 500mm (d) x 1500mm) ,guard rail(perimeter) ,carton box (assorted) ,tape holder ,wooden pallet, compressed wood pallet ,compressed paper pallet ,plastic pallet ,metal drum (200 l) empty ,pallet mesh ,electronic counting weighing machine ,electronic counting weighing machine (table top), strapping machine ,automatic strapping tool ,impulse sealer ,strapping hand tool ,drum gripper ,fork extension, wooden crate ,plastic drum ,plastic chain ,labelling printer ,rfid / bar code reader ,plastic tote storage box (dim: 400mm(l)x 500mm(d)x220mm(h), first aid kit

Central Government/Public Sector

CTN :41819339

14 Oct, 2025 NA

Multi City - Multi State

Tender For supply of traction center machined for vb/ts, as per drawing: drg no. d-a675uv2-137352 rev-01., packing instruction: detail of revised packing instruction of traction center to plno. 33500113 1. the traction center to pl no. 33500113 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 3. the traction center to pl no. 33500113 should be packed in 15 nos in iron box pallet (returnable) / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 4. each packing should have an identification showing p.o. no., pl no. description, drawing no./spec., quantity, firm's name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. 5. in addition to this, the following instructions can be considered to be added to the packing instructions for ensuring proper identification and linkage of the items against the purchase orders:- 5.1 the item or its packing shall carry a qr code containing the details as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number (or lot number for bulk items) of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date 5.2 the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 5.3 in casethe above details are not available or the qr codes are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

Ammunition Empty Box Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector