Latest ammunition item Tenders | Government ammunition item Tenders

CTN :43064087

15 Dec, 2025 4.00 Lacs

Ajmer - Rajasthan

Tender For work tender badiya bhau- fencing of 150 cm height: 35x35x5mm iron posts spaced 3 meters apart and buried 30 cm in the ground, cement concrete 1:3:6 (0.30x30x.60m) corners, with every 10th post supported by 35x35x5mm iron posts, along with four rows of black barbed wire, tying and fitting gi staple wire between two posts, including earthwork.ms jali for tar fencingexcavation of soil to a depth of 1.5 m in the foundation, trench, and drain, tamping the bottom, watering, tamping the sides, removing the excavated soil, filling the voids with soil after filling the foundation, and removing the remaining soil to a distance of 50 meters.40 mm in the foundation or firm. mixing stone, gravel, and cement and sand mortar in nominal sizes, in the ratio of 1:1 cement to 5:10 gravel, and compacting, including compaction.for the foundation and plinth, lay the stone in cement-gravel mortar, seal the side cracks, and compaction, etc.for the superstructure, lay the stone in cement-gravel mortar, seal the side cracks, and compaction, etc.for the cement plaster wall, lay the stone in a 1:6 ratio using cement and gravel.grill/gate supply for gate workplant supply for charagh l.s.

CTN :43144639

22 Dec, 2025 NA

Imphal - Manipur

Tender For supply of duty of size 20 mm dia , tile cutter blade 4 inch , pointed toe with a wider heel brick trawel of size 5 inches long and 10 inches wide of stainless steel blade , pvc casing capping 32mm wide not less than 2 mm thick , pvc coupler for 32mm casing and capping pipe , pvc tee for 32mm casing and capping pipe , pvc elbow for 32mm casing and capping pipe , pvc corner bend for 32mm casing and capping pipe. , iron cutter blade 10 inch oblique 12 inch oblique 14 inch , mcb db 2 way spn 240 volt conform to is 13032. , mcb db 8 way spn 240 volt conform to is 13032. , mcb 10 a sp 240 volt , mcb 20 a sp 240 volt , mcb 32 a dp 240 volt , exhaust fan 300 mm sweep , transperent made of pvc water level pipe of 8mm of bore and length of pipe is 30mtr , steel alloy steel or carbon steel drop forged brick hammer of wt 450gm to 680 gms , galvanised steel tube mortar pan of semi circular shape of diameter 29 inch thickness , pvc moulded mortar pan of semi circular shape of size 30 inch x 30 inch from top and 16 inch x 16 inch , cotton swing thread for construction should be heavy wt 100 percentage cotton or , stainless steel wire cloth 0.36mm nominal dia of wire and avg width , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ftx12mm thick , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ft x 19mm thick , second class hard wood scantling 50mm x 75mm , nails 1 inch 2 inch 3 inch 4 inch , pink primer for wooden surface , synthetic enamel paint high gloss superiour quality any shade white colour , thinner for paint romover pack of 01 ltr bottle , painting brush 75 oblique 100mm standard quality , ordinary portland cement opc 43 grade in 50 kg bags , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , non skid ceramic dark coloured tiles of size 600mm x 600mm x 9- 10mm thick , white cement , red oxide primer , self tapping screws with ppdm washer 50mm oblique 75mm oblique 100mm long , silicon gell tube of 29.9 ml to 118.0 ml volume based polymer , silicon gell gun consist of frame hold a tube or cartridge a trigger , chequered cement concrete tiles bullnosed 32 x 32 x 20mm thick , vitreous china water closet eurpoean pattern with integrated foot rests and p trap , pvc connection pipe 600mm long with both side neat of , cp cast copper alloy bib cock long body 15mm bore , cp cast copper alloy stop cock 15mm bore , cp cast copper alloy stop cock angle type 15mm bore , health faucet cp brass 1000mm long with peg stay bracket , factory made solid panel pvc door shutter of 30mm thick with style consisiting of frame made out of ms tube , flush door shutter of 30mm thick with solid core construction , barbed wire , cpvc pipe 25mm , cpvc tee 25mm , cpvc elbow 25mm , cpvc socket 25mm , cpvc union 25mm , cpvc reducer socket , cpvc gate walve 25mm , tenk nipple 25mm , flot walve 25mm , cpvc femail thread socket 25mm , cpvc elbow 20mm , cpvc mail thread socket 20mm , pvc pipe 75mm 10 ft long , pvc elbow 75mm , pvc socket 75mm , adhesiv solvent , cpvc tenk nipple 20mm , sink cupling 32mm , west pipe for sink , gi gate walve 25mm , gi nipple 6 inch 25mm , gi socket 25mm

Co-operative

CTN :43162110

18 Dec, 2025 NA

Mumbai - Maharashtra

Tender For repairs with polymer mortar/micro concrete repair techniques, terrace waterproofing, plumbing and painting work parvati aangan co-op. hsg. soc. ltd

CTN :43145550

18 Dec, 2025 16.96 Lacs

Mumbai - Maharashtra

Tender For repairs and renovation to dcp office, port zone at 1st floor of yellow gate police station building, mumbai. (repairs to plaster, polymer mortar, flooring and dado, doors and windows, toilet blocks and sanitary fittings)

Central Government/Public Sector

CTN :43123485

31 Dec, 2025 NA

Koraput - Odisha

Tender For supply of 39-1986-high alumina medium purity dense castable cement , 39-1987-high temperature refractory laying air setting cement as per following specification used fo , 391677-high temperature refractory laying mortar as per following specification used for brick lini

Central Government/Public Sector

CTN :43129524

31 Dec, 2025 NA

Kaiga - Karnataka

Tender For cooling water piping and associated works including cement mortar lining painting at 2x700 mwe kaiga atomic power project unit 5 and 6

CTN :41918538

13 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras supply of high duty fire clay mortar to specn. ofm- 62-016 (enclosed)

Central Government/Public Sector

CTN :42493186

19 Dec, 2025 NA

Mangalagiri - Andhra Pradesh

Tender For corrigendum : supply of glucometer , laryngoscope set with blade size-3 , nebulizers - ultrasonic , paediatric bp cuff for neonatal , paediatric bp cuff for infant , paediatric bp cuff for child , ishihara colour vision acuity chart , skin fold caliper , shakir scale set of 25 , infant weighing machine- manual , snellen vision acuity chart , snellen vision acuity chart- alphabet - e , non penumatic anti shock garment , weighing machine normal , weighing machine digital omron , fetal doppler , ctg machine cardiac tocography , breast pump , kellys pad , haemoglobinometer- sahil kit , steam inhaler vapurizer , nebulizers-jet , thermometer rectal , thermometer digital , thermometer oral , laryngoscope set with blade size-4 , laryngoscope set with blade size-1 , laryngoscope set with blade size-0 , infant weighing machine , infantometer , hanging weighing machine , aneroid bp apparatus , knee hammer , tuning fork 512 hz , tuning fork 256 hz , tuning fork 1024 hz , haemoglobinometer - table top , ambu bag term set with mask-250ml volume , ambu bag pediatric set 500ml with mask , ambu bag adult set with mask-2000ml volume , oxygen hood , mortar and pestle 4 inch , sterilizer with electric plug 14 inch , stadiometer , infrared red lamp ) /bid number : gem/2025/b/6836073 * /dated: 29-10-2025 & & / bid document 1 / 39

CTN :42998990

30 Dec, 2025 1.07 Crore

Bahraich - Uttar Pradesh

Tender For akankshi nagar yojanantargat nagar panchayat payagpur men block parisar ke andar khali bhoomi par adhyayan kendra ki sthapna hetu library ka nirman karya. - earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil. as per dsr no.-2.8.1, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as per dsr no.-2.25, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per dsr no.-4.1.8, supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per dsr no.-2.27, treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration. as per dsr no.-2.35.3.1, reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). as per dsr no.-5.2.2, reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.3, ground floor, first floor, as per dsr no.-5.3b, as per dsr no.-5.3b, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.1.2, centering and shuttering including strutting, propping etc. and removal of form for. as per dsr no.-5.9, foundations, footings, bases of columns, etc. for mass concrete. as per dsr no.-5.9.1, lintels, beams, plinth beams, girders, bressumers and cantilevers. as per dsr no.-5.9.5, columns, pillars, piers, abutments, posts and struts. as per dsr no.-5.9.6, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in. as per dsr no.-6.1.1 & 6.1.2, cement mortar 1:4 (1 cement : 4 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) as per dsr no.-4.10, providing & applying a coat of residual petroleum bitumen of grade of vg-10 of approved

CTN :43114690

16 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply and installation of miscellaneous electrical items for g+5 storied office building at 149, jakeria bunder road, sewri, mumbai-400015 - "supplying and erecting hms pvc conduit frls grade 25 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 20 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 32 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", supplying and erecting of gi box for concealed type 1 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 2 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 3 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 4 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., raceways , under floor trunking, supply and installation of totally concealed underfloor race-ways as approved by bl eic. the channels shall be fixed to the floor with aluminum strips so that there is no movement of the channels when civil work(pouring of cement concrete) is being done. the channels shall be earthed at the boxes and at the joints with 14swg bare copper wire with screws so that earth is continuous. the channels shall be terminated at the junction boxes which shall be measured separately. refer section details rate to include civil works such as chasing the floor & reinstatement to final finish., nominal sizes:, 100 x 50 x 2.00mm anodised alum box section, 50 x 50 x 2.00mm anodised alum box section, , under floor trunking junction box, s & i of underfloor frame type gi junction box fabricated out of 16swg gi sheet steel without cover; box shall be painted with two coats of red oxide primer and two coats of synthetic enamel paint. cut outs shall be provided on the sides of the box to facilitate the entry of raceways as described above. ms cover shall be powder coated and fixed with underside fram to the under floor jb. jb shall be frame type and shall not bend if stepped on it, 300 x 300 x 50mm deep, 150 x 150 x 50mm deep, , s & i of 2.00mm thick cover plate for the junction box fabricated out of 2.00mm ms sheet steel and powder coated to approved shade with all fixing arrangements the size of the cover plate shall be 25mm more than the cover size of the junction box on all sides , , cover plate suitable for 300 x 300 x 50mm deep jb, cover plate suitable for 150 x 150 x 50mm deep jb

Ammunition Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector