Latest amperemeter Tenders | Government amperemeter Tenders

CTN :45405307

12 Jun, 2026 NA

Liluah - West Bengal

Tender For corrigendum : supply of ferritic steel sheet 2x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction:stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel)coils. the coil shall be protected in reasonably good condition to with stand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gisheet. iv) side of the coil should be covered with card board sheet. v) after this whole coilshould be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edgeof the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on thecircumference of the eye. ix) whole coil should be mounted on wooden blocks for easylifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. protection procedue: covered in pi [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45438686

22 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45431139

12 Jun, 2026 1.39 Lacs

Attingal - Kerala

Tender For state plan-state plan 2025-2026-procurements of equipments for wtps-supply and installation of water quality testing equipments at wtps under ws section 1 attingal-general civil work-general civil work - purchase of jar test apparatus, od229090/2025-2026:supply and installation of the jar test apparatus must meet the following specifications. no. of. stirrers -6 minimum, rpm- 25 to 200 rpm or better, capacity of single stirrer unit-, control—digital control (digital timer & rpm counter), stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, power single phase (220 - 240 volts), illumination—fluorescent tube such that illumination should not contribute heat to the system and entire equipment must have a minimum warranty period of two years, purchase of ph meter, od229087/2025-2026:supply and installation of bench top ph meter must with the following specifications: (a) regarding ph: the range must be between 0.00 to 14.00 ph or better, the resolution 0.01 or better, the accuracy 0.02 ph or better, the calibration points should be atleast 3 points, buffer option should be suitable for standard buffers. (b) regarding mv: range 0 to 1999 mv, resolution 1 mv or better, accuracy mv or better (c) regarding temperature: range 0.0 to 99 degrees celsius or better, resolution should be 0.1 degrees celsius or better, and accuracy of 0.5 degrees celsius or better. (d) the electrode of the ph meter must be a single junction, body plastic/unbreakable material, gel-filled electrode, and atc probe, and the electrode stand should also be provided by the supplier. (e) ph meter must also have lcd/led display, a dual display of ph or mv with temperature, with auto buffer recognition, offset/slope should be displayed, power 230v 10%, must provide a minimum of 100 ml of buffer solutions of ph 7.0, ph 4.0, and ph 9.2. the supplier must provide all accessories for smooth functioning of the equipment and a hard copy of the user manual with instrument specifications. the ph meter must have a minimum warranty of one year for the meter and a minimum of six months for the electrode. the calibration at the time of the installation must be done by the supplier., purchase of conductivity-tds meter, od229088/2025-2026:supply and installation of conductivity - tds meter with conductivity range of at least 0.1 s to100 ms, resolution : 0.001 s and tds range of 0.1 ppm to 100 ppt , temperature : 0 degree celsius to 1000 degree celsius (auto / manual), readout : 7 digits led (3 digits for temp. and 4 digits for cond./tds), printer interface for 80 column d.m. printer with minimum one year warranty

CTN :45416480

02 Jul, 2026 20.00 Lacs

Rohtak - Haryana

Tender For rate contract for two years (extendable) for purchase of m and e items for use in gas mani fold- bpc flow meter with humidifier bottle:, providing of bpc flow meter (polycarbon 0-15 ltr. capacity/min) and 250 ml humidifier bottle with bs type oxygen probe for existing outlets complete etc. as required at site., humidifier bottle:, humidifier bottle should be compatible with oxygen flow meter and it should be reusable type. the bottle should be shatter proof and made of polypropylene. metal component of humidifier bottle should make of brass with anti- corrosion nickel plating., trolley for b type cylinder:, trolley with load capacity of one oxygen b type cylinder. made up of mild steel & frame work made of crc tube. surface finishing should be powder coated. trolley with 02 no. of wheels., nrv for manifold:, providing & fixing of manifold non return valve is specially made of solid brass body, 100% flow return guard. facilitates changing of empty cylinders plus helps in preventing the back flow of the gases. high pressure non- return valve - 230 bar (3330 psi), 2nd fix for ohio/heal rom type oxygen/air/nitrous/vacuum outlet:, a gas specific back body with steel mounting plate. compatible for existing outlet., probe for ohio/heal rom type oxygen/air/nitrous/vacuum outlet:, probe made with stainless steel matching with existing outlet point. indigenous and ce certified., probe for pb type oxygen/n2o/vacuum/air outlet:, probe made with stainless steel matching with existing outlet point. indigenous and ce certified., star for 2nd fix of pb type oxygen/n2o/vacuum/air outlet, spring for 2 fix of pb type oxygen/n2o/vacuum/air outlet, nrv for ohio/heal rom type oxygen/air/nitrous/vacuum outlet point:, providing & fixing of non return valve is specially made of solid brass body, 100% flow return guard., o' ring set for penlon/ beconmedas type oxygen/air/nitrous/vacuum outlet point, ward vacuum unit with 2000ml jar & regulator:, consists of one no. vacuum regulator with on/off knob, collection jar of capacity 2000 ml made of unbreakable which is polycarbonate/plastic auto clavable up to 134 deg. c. a bracket is also provided regulation range from 0-760mm hg. the vacuum unit should include regulator along with 0-760mm of hg vacuum gauge of 2" size dial. 2000ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type., ward vacuum unit with 600ml jar & regulator:, consists of one no. vacuum regulator with on/off knob, collection jar of capacity 600 ml made of unbreakable which is polycarbonate/plastic autoclavable up to 134 deg. c. a bracket is also provided regulation range from 0-760mm hg. the vacuum unit should include regulator along with 0-760mm of hg vacuum gauge of 2" size dial. 600ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type., vacuum regulator:, the vacuum regulator with on/off knob along with range from 0-760mm hg &vacuum gauge of 2" size dial., gasket for 600 ml. of ward vacuum unit, gasket for 2000 ml. of ward vacuum unit, mounting bracket for ward vacuum unit (plastic):, a bracket is also provided regulation range from 0-760mm hg., ohio hill rom outlet sheet, ohio/ hill rom outlet o'ring set, pb type outlet sheet, pressure gauge(o₂/n₂o/air):, providing & fixing of pressure gauge (pressure range- 100 to 400 kg/cm2) material- stainless steel body, size- 4 inch & pressure (0 bar to 7 bar), high pressure tube(hard type):, non toxic. medical grade pvc material finish. transparent high pressure tube options are clear in contraction as well as smooth in usage., low pressure tubing:, non toxic, medical grade pvc material finish. transparent low pressure tube options are clear in contraction as well as smooth in usage., lock for ohio/hill rom outlet point, nrv washer for ohio/ hill rom outlet point

Central Government/Public Sector

CTN :45339079

22 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45337656

18 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply, installation, rewiring and testing of existing high mast with 4 sqmm 5 core electro propel rubber cable for 30 meter height high masts per is:694 along with terminal connector 440v, 30a ampere copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 61 7-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35 with current rating of minimum 10a size 2.5 and 99.9% etp grade copper conductivity 97% iacs minimum, finish tin-plated, conforming to standards bs:en-61238 and other accessories [ warranty period: 30 months after the date of delivery ] ]

CTN :45348093

11 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For providing of custom bid for services - supply installation erection testing and commissioning of 100 feet tall national flag mast system including all accessories and electrical components- hot rolled ms plate, base plate and anchor bolt 3. surface finish: (a) painting: polyurethane (pu) white paint (b) dry film thickness: minimum 110 microns (c) glossy finish (d) corrosion-resistant and weatherproof 4. flag mast accessories: the following accessories must be supplied and installed a) stainless steel wire rope of 8 m b) compensating disc c) l- stoppers d) manual operating handles e) mounting plates f) gi junction box g) complete aluminium accessories h) lightning arresters i) flag clamps j) ss fastners 5. electrical components: 1. double dome aviation light -1 no. 2. led flood light of 400 watts - 2 nos. (make - haveels/crompton/bajaj/ philips with minimum 1 year warranty) 3. electric motor of 1.5 hp capacity for lowering and raising of flag. (reputed indian make) 4. outdoor feeder pillar panel: weather proof, grey enamel painted and without meter provision.

Trust

CTN :45342958

30 May, 2026 NA

Katra - Jammu And Kashmir

Tender For supply of miscellaneous electric items- steel tubular 9 meter long pole (st-410 sp3, steel tubular 8 meter long pole (st-410 sp1:, 16 kn polymer shackle insulator, 1.1 kv (low tension), go set 11 kv hd, ab switch 3 phase, 3-pole 200 amp, vertical; type with rod heavy duty, 11 kv horn gap fuse set (hg set) 3-phase 4 amp polymer type heavy duty, galvanized nuts and bolts full thread with was 4" & 6" heavy duty, anti climbing device with clamps, galvanized stay set with 50*8 mm stay clamp guy insulator (02 no.), anchor plate (200*6mm nuts-bolts, 2 nos turn buckets, 1.8m long, 16 m diameter solid gs stay rod & 7/15 mm dia gi standard wire complete., guy/stay wire 7/14, galvanized steel, typicall hot-dip zinc-coated for corrosion resistance, guy insulator, led street lights 70/72 watt, pressure die ca aluminum housing only, system lumen output 120lm/w, cct: 5700-6500°k, cri≥ 80, thd≤1 surge 4kv, pf >= 0.95 ip66, warranty minimum -years, pvc cable 3 core 2.5 sqmm, mukki clamps, rabbit conductor acsr 50 sq.mm, gi u-clamp for shackle insulator with pin / nu, lt line spacers, high quality rigid pvc (poly vinyl chloride) or polypropylene, with uv stabilization for weather resistance

CTN :45326601

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

Central Government/Public Sector

CTN :45337395

10 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of 27w led floodlight,as per technical specification as given below; a) 9 powerful led's of 3w each with lumen power of 1800 lumen, ip67 rated protected against dust and effects of water immersion up to 1 meter b) corrosion resistant aluminium die-cast construction in premium powder coated finish c) sturdy polycarbonate lens to withstand the toughest of job site conditions d)corrosion resistant stainless-steel bracket and power supply 12v to 24v. note: 1) firm should attatch the point-wise remarks for specification given and submit along with offer, other wise offer will not be considered. 2) firm should specify the product name and model no. along with catalogue/leaflet otherwise offer will not be considered. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Amperemeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Trust

Central Government/Public Sector