Get complete information related to latest Analog Drive Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Analog Drive Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Analog Drive Tenders.
Tender For tender for the work of meter-reading monthly / bi-monthly spot billing system using android mobile devices (pda) for nanapondha, kaprada & sutharpada sub division under dharampur division.
Tender For pro.the comp.billing system including com.opetr at every billing center collecting the meter reading with means of digital camera, data enery of meter reading,printing of processed bill and same distributing to consumer within specified the time limi
Tender For supply, installation, testing and commissioning of dcus/gateways/ allocation of sim network service provider and the arrangement of sim cards to enable reliable medium for two-way communication between smart meter & amp:, hes (head end system) over rf mesh network/cellular network. 1. the dcu/gateway shall be compatible with the smart meters mentioned above. rf mesh network should use 865-867 mhz frequency band. 2. the data acquisition (push/pull) frequency shall be configurable 15 min, 30 min or 60 minutes. it shall push events such as tamper, power off etc. to hes immediately on occurrence/receipt from meters. 3. it shall have provision for the cellular, wifi and ethernet communication for the backhaul tohes. 4. sufficient number of gateways shall be installed in such a way that all the meters are covered in the network efficiently. 5. it shall be capable to handle data of minimum 500 nos. of any type of smart meter (1ph/3ph). it shall be able to communicate with the nearest meters at a distance of at least 300 m, depending on topographical features. 6. communication of the nearest meters with other meters shall be established through appropriate mesh formation. rf mesh shall support self-forming and self-healing features. 7. rfmesh shall support at least 15 no. of hops. 8. the equipment shall be weather-proof and dust-proof (minimum rating: ip54 for indoor and ip65 for outdoor installation). it shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc. 9. it shall have passed the following emc tests from reputed lab: conducted emission, electrostatic discharge (esd), radiated immunity, electrical fast transient (eft) - burst, surge, rf conducted disturbances. 10. rf mesh network shall be established to meet the slas as mentioned in tender document. 11. replacement warranty period shall be 66 (sixty-six) months from the date of supply or 60 (sixty) months from the date of commissioning, whichever is earlier. [ warranty period: 30 months after the date of delivery ] ]
Tender For pro.the comp.billing system including com.opetr at every billing center collecting the meter reading with means of digital camera, data enery of meter reading,printing of processed bill and same distributing to consumer within specified the time limi
Tender For supply of smart energy meters with head end system services in gift city - 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009631: 3p4w 240v 10-100a cl1.0 wc smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 3 phase 4 wire, isi marked, 1.0 class accuracy, 10-100 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009632: 3p4w 240v -/5a cl0.5s ct smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of 3 phase 4 wire, isi marked, 0.5s class accuracy, fully static lt current transformer (ct) operated smart energy meter with dlms protocol & bidirectional communication facility. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 2 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 0.5s for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor
Tender For pimpri-chinchwad industrial area industrial area.... m and r to w/s scheme....providing photo water meter reading system and distribution of bills to the consumer-2025-26
Tender For corrigendum : labour work for monthly & bimonthly meter reading with hhe/gprs system for consumers under various sub division of botad division.
Tender For pro.the comp.billing system including com.opetr at every billing center collecting the meter reading with means of digital camera, data enery of meter reading,printing of processed bill and same distributing to consumer within specified thetime limit
Tender For corrigendum : 15/2025-26 purchase of uhwc - नागरी आरोग्यवर्धिनी केंद्राकरिता (uhwc) आवश्यक असलेले साहित्य खरेदी करणेबाबत…(estimated rate) - corrigendum: 15/2025-26 purchase of uhwc - nagari arogyavardhini kendrakarita (uhwc) regarding purchasing necessary literature…(estimated rate) - (uhwc) (estimated rate), bucket big virgin plastic 16 lit make- madware/milton/jayo, bucket small virgin plastic 7 litmake- pavan/madware/jayo, swing dustbin square - 30 lit foot operated- red, blue, yellow & black colourmake-nacoda/polywell/ kyrace, swing dustbin 80 lit - round shape with lid red, blue, yellow, white & green colourmake-pavan/ratan/jayo, dustbin 60 lit - round shape with lid red, blue, yellow, white & green colourmake-pavan/ratan/jayo, plastic dustbin pedal - 10 lit foot operated- blue, red &yellow colourmake-pavan/joyo/nil kamal,, 3 bucket mop wringer trolley - 20 lit bucket each with (3 bucket wringer trolley bucket system for cleaning for hospital with included cotton wet mop refill (350 gm) clip - 60 ltr, red, blue, yellow, gray, plastic), wet mop - 6" 350 head, looped-end white cotton, ss handle make-gala/scotch-brite/joyo, , dry mop - 18" 360 degree rotate make-gala/joyo/roots, garbbage bag 19*21 - 50 micron, black, red, yellow, blue, green & white colour-1kg packet, hard broom weight 230 grams, soft broom make-gala/homeor/bbt, plastic supali weight 10 grams make-gala/milton/flair, mackintosh hospital sheetsize: 4 feet * 5 meter) material: water proof rubber colour: pink, blue, cotton hand towel 40*60 cm 400 gsm white colour (bombay dying)size:40cmx60cmweight:400gsm,100% cotton terryfeatures: double-stitched hems, bleach-resistant, suitable for frequent high-temp washes, chlorine tablet active ingredient: sodium dichloroisocyanurate (naddc) in anhydrous or dehydrate form.available chlorine: must release 45mg to 75mg of available chlorine per tablet (suitable for treating 20l of clear water)compliance: must strictly comply with is 9825:2003 or is 15773:2008, salt iodine test kit purpose: to monitor iodized salt quality under the national iodine deficiency disorders control programme (niddcp).methodology: starch-based liquid reagent (solution a& b) for colorimetric reactionmeasurement range: semi-quantitative detection at 0,7,15, and 30+ppmcapacity: minimum 100 tests per kitcontents: 2x dropper bottles, 1x laminated colour comparison chart,1x marathi/english instruction manual.compliance: must meet niddcp guideline for field testing., reusable cotton bed sheet for examination table- (size- 36 inch*84inch white colour), cleaning detergent powder 1kg packetmake-nirma , wheel, rin,, dry cell battery (1.5v)type; primary (non-rechargeable) alkaline or zinc carbon.size: aa, aaa, d.features; guaranteed leak-proof, long shelf life, clear expiry marking., torch ordinary rechargeable light source: 1.5w-3w led (>100 lumens)battery: li-ion or life po4 (min 1200mah).backup: 4-6 hrs continuous.charging: usb type-c or ac adapter.body: impact-resistant abs plastic., snellen vision chart-marathi language chart testing distance: calibrated for 6 meters (20 feet). acuity range: 6/60 to 6/6 (20/200 to 20/20 equivalent). material: high-grade, non-tearable pvc or acrylic (min 3mm). finish: matte/non-glare to meet nqas illumination standards. features: integrated red/green bars for duo chrome testing. language: standard marathi (devanagari) optotypes., near vision chart -marathi language chart language: specifically printed in marathi (devanagari script). notation system: dual notation featuring jaeger (j1 to j18) and n-point (n5 to n36) scales. testing distance: calibrated for a standard reading distance of 33 cm to 40 cm. material: high-grade, non-tearable pvc or heavy-duty laminated card (minimum 300 gsm). finish: matte/non-reflective finish to prevent glare from clinic lights. design: double-sided printing (side a: marathi paragraphs; side b: marathi isolated characters or english equivalent). dimensions: approximately 1
Tender For corrigendum : work of meter-reading monthly / bi-monthly spot billing system using android mobile devices (pda) for valsad east, valsad ind sub division under valsad city division.