Latest analyser service Tenders | Government analyser service Tenders

State Government

CTN :45399727

12 Jun, 2026 78.47 Lacs

Belagavi - Karnataka

Tender For providing consultancy services for preparation of structural design and design drawings with all necessary soil investigations for all services including all allied works of proposed construction of elevated corridor/grade separator in belagavi city - phase ii extending from kittur rani chennamma circle to dharmveer sambhaji circle, including connecting ramps. including all the components of electrical services, utility shifting, signal shifting and land acquisition etc., including proof checking of design and design drawings from iits or iisc and also consultant to prepare revised drawings and get approval from competent authority if any changes occur during execution of the project and also assist in finalization of dts as per the instructions of engineer in charge.(inclusive of consultancy service taxes, local taxes, duties, fees, levies and other impositions imposed under the applicable law on the consultants but excluding gst charges)

CTN :45407172

23 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of reference books b b - fr sr part i general rules 2025 , fr sr part ii t.a. rules 2025 , fr sr part iii leave rules 2025 , fr sr part iv da, dr and hra 2024 , pension compilation incorporating ccs pension rules 2025 , ccs commutation of pension rules 2025 , ccs extraordinary pension rules 2023 , central government employees group insurance schemes 2023 , medical attendance rules 2024 , ccs cca rules 2025 , ccs conduct rules 2026 , general provident fund rules 2026 , leave travel concession rules 2026 , children educational assistance 2025 , gfr 2017 incorporating compendium of rules 2026 , delegation of financial powers rules 2025 , house building advance rules 2022 , suspension and reinstatement 2024 , overtime allowance rules 2025 , central administrative tribunal act, rules and orders 2023 , central government department canteens 2012 , re- employment of pensioners-civilians and ex-servicemen 2021 , advances to central government staff 2026 , central government account receipts and payments rules 2026 , seniority and promotion in central government services 2023 , reservations and concessions for scs and sts, obc 2026 , reservations and concessions for persons with benchmark disabilities , confidential reports 2020 , updating of pre-2016 pensions 2020 , new pension scheme 2024 , supplement to c-62 2024 , second supplement to c- 62 2024 , third supplement to c-62 2024 , ccs revised pay rules, 2016 bilingual 2025 , revision of pre-2016 pensions with ready reckoner 2017 , right to information act, rules, orders and guides 2025 , annual compendium of orders on services matters 2024 , manual on disciplinary proceedings complete with rules and orders 2025 , complete manual on establishment and administration 2025 , manual on office procedure with notes and instructions 2026 , pensioners companion 2022 , master manual for ddos and heads of offices part i , master manual for ddos and heads of offices , interpretations on service rules vol vi , t a rules made easy , pension rules made easy , leave rules made easy , pay rules made easy , master guide to fr and sr and service rules , income tax on salaries , handbook for central government staff //bid details 2 / 36

corporations/Associations/Others

CTN :45350140

03 Jun, 2026 NA

Patan - Gujarat

Tender For supply of stationery/ stationery form in the offfice of kachchh branch canal dn. no.2/5, radhanpur - building specification book, road specification book, bridge specification book, additional instructions to tender book, cement register part - 1, cement register part - 2, cement register part - 4, steel register part - 1, steel register part - 2, quality control register, c.c.cube register, slump test register, test register, site visit register, work order book, bridge inspection register, field level book, large size measuring book, dr book, tr book, check memo book, tender issue register, tender agreement register, interest bearing security registration form - 85, treasury filling register form - 4, t.s approval register, cashbook (ledger paper, 200 pages, full cloth binding), inword register, outword register, peon book (tapal book), postag stamp register, attendance regster, pension paper book, service book (softbound / paper cover), service book (hardbound / board binding), rent register, deposit register, pay bill abc register, reservation register, vehicle logbook, histroy sheet, file cover (cardboard / softbound), file cover (hardboard / hardbound), three cord portfolio, two cord flapboard, stationery register, report file a4 size, report file legal size, polynet tender cover (16*12 size), mailing envelopes (12x10 inch.)

CTN :45348305

17 Jun, 2026 NA

Goa - Goa

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - repair and servicing of ni-cd battery charger/ analyser; repair and servicing of ni-cd battery charger/ analyser; service provider

Central Government/Public Sector

CTN :45347410

17 Jun, 2026 NA

Delhi - Delhi

Tender For providing of healthcare kitchen and dietary service - general ward; diet; as per the diet sheets/doctors instructions attached in the bid document; morning tea + snacks, breakfast, lunch, evening tea + snacks, dinner,healthcare kitchen and dietary service - icu; diet; as per the diet sheets/doctors instructions attached in the bid document; morning tea + snacks, breakfast, lunch, evening tea + snacks, dinner

Central Government/Public Sector

CTN :43015262

21 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of valves with variety of seat material and actuation configurations c c - 2108329 , 2136102 , 2136101 , 2108326 , 2108325 , 2111440 , 2111441 , 2111442 , 2115085 , 2013418 valve,butterfly design standard : api 609/bs 5155 type,end connection : wafer lugged service : water pressure designation : pn 16 rating,temperature : 25 deg c- 90 deg c uni/bi-directional : bi-directional type,face : raised face material,body : astm a 216 gr. wcb material,trim : astm a351 gr. cf8m material,seat : epdm material,stem : aisi 316 options : pnem. actur, mo & limit switch size : dn 100 for booster pump to emergency tank line, booster pump to gland sealing line and dewatering drum water flushing line of bf-3 inba a. technical specification: 1. reference drawing number :3303250201 b. special instructions: 1. valve is to be supplied with double acting pneumatic actuator, manual override and limit switch. 2. party has to submit 3 sets of drawings for vsp approval before manufacturing. (our drawing is for reference only) 3. the valves shall be painted as per the manufacturer standard specification. 4. the valves shall be attached with a metallic tag with details of po no,size,type and pressure rating etc. 5. test certificate shall be submitted from government/government approved laboratories only. , valve,butterfly design standard : api 609/bs 5155 type,end connection : wafer lugged service : water pressure designation : pn 16 rating,temperature : 25 deg c- 90 deg c uni/bidirectional : bi-directional type,face : raised face material,body : astm a 216 gr. wcb material,trim : astm a351 gr. cf8m material,seat : epdm material,stem : aisi 316 options : hand lever spring latch size : dn 150 for inlet/outlet of booster ) /bid number: gem/2025/b/6944446 * /dated: 02-12-2025 & & / bid document1 / 18

Central Government/Public Sector

CTN :44915632

07 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 2003655 , 2003690 , 2003708 , 2003717 , 2003733 , 2003734 , 2003735 , 2003736 , 2003737 , 2003738 , 2003739 , 2003740 , 2112483 , 2112484 , 2114138 , 2114139 , 2114146 , 2114152 , 2114162 roll2003655 material : alloy cast steel hardness : 40-45 shore c drawing reference : 1-d22939, rev-c tensile strength : 85 to 100 kgf/mm stand no : billet mill 1 & 2 size : 850 x 1200 mm barrel hardness : 40-45 shc roll approximate unit weight : 7.35 tons uts : 85-100 kgf/sq.mm neck hardness :40-45 shc neck runout :0.04 mm roll coating : anti-corrosive ring hardness :600-700 hv3 test certificate required : yes ring drawing no : mec/1/22938/rev c ----------------------------------- special instructions: ----------------- ------------------ 1) ultrasonic,uts & %elongation tests shall be done and certified. 2) flat wobblers to be strictly concentric with roll neck journals. 3) rolls to be suitably packed and numbered for identity. 4) the microstructure should be free from continuous network of carbides along the grain boundaries. 5) t.c. to be given along with micro-structure photograph. a seperate copy to be sent to d.g.m(rs&rs) at the time of delivery. 6) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation, cracks, hard spots, flakes etc which may adversely affect their service life. 7) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been ) /bid number : gem/2026/b/7416074 * /dated: 16-04-2026 & & / bid document 1 / 40 rejected before use. 8) the rolls are also to be guaranteed for the roll life as mentioned or 5 years from the date of supply to vsp which ever is earlier.this guarantee clause superseeds, guarantee mentioned elsewhere in the po(a/t), in this regard. 9) hardness test of end ring shall be done and certified. 10) these rolls are used in roughing stands of hot rolling mill. roll set life: bh1=14.35, bh2=14.55 lakh tons, roll2003690 material : sg cast iron (accicular) hardness : 70-75 shore c drawing reference : 1/4012885, rev-e stand no : bar mill 19 & 21 size : 360 x 600 mm barrel hardness : 70- 75 shc roll approximate unit weight : 0.70 tons neck hardness :38-45 shc neck run out : 0.04 mm roll coating : anti-corrosive coating drop in hardness : 1 shc per 10mm on barrel depth ---------------------------------- -------------- special instructions: -------------------------------------- ---------- 1) flat wobblers to be strictly concentric with roll neck journals. 2) rolls to be suitably packed and numbered for identity. 3) t.c. to be given along with micro-structure photograph. a seperate copy to be sent to d.g.m(rs&rs) at the time of delivery. 4) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation, cracks, hard spots, flakes etc which may adversely affect their service life. 5) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been rejected before use. 6) the rolls are also to be guaranteed for the roll life as mentioned or 5 years from the date of supply to vsp which ever is earlier.this guarantee clause superseeds, guarantee mentioned elsewhere in the a/t, in this regard. 7) these rolls are used in hot rolling mill. roll set life1: 19re16&18=2.00,19re20=1.62 l.tons roll set life2: 21re25=2.34, 21re36=0.7 lakh tons roll set life3: 21re28&re32=0.90, 21re32, re36=0.70 lakh tons roll set life4: 21rore16,18=2.16, 21re20=2.13 lakh tons, roll2003708 material : sg cast iron (accicular) hardness : 70-75 shore

State Government

CTN :43899718

22 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : grain analyser service

Central Government / Public Sector

CTN :44741631

16 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For annual rate contract for civil, housekeeping, horticulture, mechanical, hse, electrical and t and i works at serpl vizag - name of work: annual rate contract for civil, housekeeping, horticulture, mechanical, hse, electrical and t&i works at serpl vizag note: 1. please enable macros before filling the rates to see the quoted figures in words. 2. the bidder shall quote firm prices “excess(+)/ at par/ less(-)” against the rates mentioned in the price schedule provided in boq1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. in case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. only "bidder name", "excess (+) or "at par" or less (-)" & "percentage" are to be filled by the bidder in the designated "sky blue cells". for "at par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "excess (+)" or "at par" or "less (-)" can be selected from the dropdown menu by clicking on the cell. 5. no changes shall be made by the bidder to s.no., unit, quantity. 6. in case of any difference in item description/ unit/ quantity in boq, then the item description/ unit/ quantity given in the tender document shall prevail. 7.the rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. goods and services tax as per gst act 2017 for concerned services has been added to the base price of below mentioned services. if the bidder wishes to quote some other goods and services tax rate other than mentioned in the price schedule provided in boq1 sheet, they may quote the same in "annexure h". statutory variation on goods and services tax as applicable for the category/ service shall be to owner’s account up to the contractual completion period. reverse charges mechanism on goods and services tax amount shall be applicable as per govt. rules. 9. bidders are advised strictly not to alter or change the boq format/ contents. bidders are also advised not to paste any image file or put any additional conditions in the boq work sheet. 10. please select the applicable rate of gst in cell 'w13'. rate selected shall be applicable for the entire boq. 11.please note that rates of item nos. from 60 to 60.11 (manpower deployment fixed part ) are fixed and bidders quoted percentage will not have any impact on these items. abbreviations of units: sqm - square meter, mon - month, h - hours, ls - lumpsum, ea - each, cum - cubic meter, kg - kilogram, sqft - squarefoot, m - meter, day - days

Central Government / Public Sector

CTN :44619352

08 Apr, 2026 NA

Begusarai - Bihar

Tender For works for complying oisd-244 requirements of dyke of tanks pl-04, pl-05, pl-06 and pl-07 at erpl barauni pump station - works for complying oisd-244 requirements of dyke of tanks pl-04, pl-05, pl-06 and pl-07 at erpl barauni pump stationnote: 1. please enable macros before filling the rates to see the quoted figures in words. 2. the bidder shall quote firm prices “excess(+)/ at par/ less(-)” against the rates mentioned in the price schedule provided in boq1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. in case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. only "bidder name", "excess (+) or "at par" or less (-)" & "percentage" are to be filled by the bidder in the designated "sky blue cells". for "at par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "excess (+)" or "at par" or "less (-)" can be selected from the dropdown menu by clicking on the cell. 5. no changes shall be made by the bidder to s.no., unit, quantity. 6. in case of any difference in item description/unit/quantity in boq, then the item description/quantity/unit given in the tender document shall prevail. 7.the rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. goods and services tax as per gst act 2017 for concerned services has been added to the base price of below mentioned services. if the bidder wishes to quote some other goods and services tax rate other than mentioned in the price schedule provided in boq1 sheet, they may quote the same in "annexure 08". statutory variation on goods and services tax as applicable for the category/service shall be to owner’s account up to the contractual completion period. reverse charges mechanism on goods and services tax amount shall be applicable as per govt. rules. 9. bidders are advised strictly not to alter or change the boq format/ contents. bidders are also advised not to paste any image file or put any additional conditions in the boq work sheet.

Analyser Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors