Latest anchor chain Tenders | Government anchor chain Tenders

CTN :43144502

02 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - rate contract for surface preparation by uhp hydro jet blasting for paint application on surface of helo decks weather decks ship side above water superstructure and anchor chain cable onboard in vessels; any oth..

corporations/Associations/Others

CTN :43132510

18 Dec, 2025 71.50 Lacs

Ajmer - Rajasthan

Tender For supply of earthing chain as per technical specification of tn-2057

State Government

CTN :43147085

18 Dec, 2025 80.2 Thousand

Kinnaur - Himachal Pradesh

Tender For tender for providing re-earthing and chain link fencing around 22/0.4kv, 100kva s/stn. at r/r centre kalpa in electrical section kalpa, under electrical sub-division, hpsebl, reckong peo.

CTN :43125908

31 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vuec001 : :--earthing cable, manual fuelling nozzle, ball float valve 200mm, rachet, spring, long hose assebly, drop nose pin with chain, spider, hose assembly short, refueling/trigger nozzle

State Government

CTN :43117029

17 Dec, 2025 NA

Delhi - Delhi

Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :42849223

17 Dec, 2025 3.41 Crore

Delhi - Delhi

Tender For corrigendum : supply of sitc of auditorium in national media centre pib c c - 200w led cct tuneable fresnel light having cob led source , 300w led profile spot 19 degree light having cob led source , aluminium o type clamp provided with fixture mounting 25mm m8 bolt and wing nut , dual safety chain made of gi wire bundled and twisted together , ms sheet electrical panel with 7 outgoing circuits , high quality power junction box having total max rating 10a, 250v a.c with 350meter frls copper 3 core cable , metal power junction box 2 way snap fit , high quality dimming in junction box 1 way , high quality dimming out junction box 1 way , dmx loop junction box having 1 no. of dmx 5 pin xlr , internal earthing system with copper bare conductors all along the cable trays , black powder coated cable trays , dmx male female connectors 5 pin with rubber sheath protection with 300 meter cable , dmx male termination connector 5 pin with resistor for signal defaming , dmxcontroller 12 faders with dmx 512 protocol , opto isolated rdm enabled dmx splitter unit , table top microphone with 600mm gooseneck microphone, supercardoid lobar , digital mixing console and ipad control , modular card based digital signal processor , 2-way high power loudspeaker , ptz auto framing camera with ai analytics , live switcher with 4 standards converted 3g-sdi inputs, 2d dve , sdi to usb for media converter , large format display fullhd , camera preview full hd led screen , motorized retractable mic and monitor , one eighth hdmi distributor , hdmi transmitter and receiver , 8 by 8 hdmi swticher , sdi cable and connerctor , central controller with touch panel , digital interactive podium , phonoconnectors , dismentling of existing cables and connectors , complete sitc of auditorium , system operator for av system, lighting etc for 3 years, 3 operator ) /bid number : gem/2025/b/6856971 * /dated: 20-11-2025 & & / bid document 1 / 30

CTN :43054630

15 Dec, 2025 NA

Solan - Himachal Pradesh

Tender For supply of xlpe cables for working voltages from 3. 3 kv up to and including 33 kv as per is 7098 (part 2) (q3) , cable termination kit (v2) (q3) , excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 meter in deep getting out in hard dense soil for stay assembly erection of poles complete , returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thick , removing of excavated material n exc 50m and depositing where directed at a level n exc 1 point 5m above the starting point , supply install testing and commissioning of ht 11 kv 3 phase 50 cycles outdoor type totally enclosed metal clad switchgear complete with vcb having rupturing capacity upto 350 mva , supply and fix cable jointing kit for 11 kv straight through cold shrink 3 core x 120 sqmm complete , material and labour for reinforced concrete pipes 150mm dia class np2 laid and jointed complete with collars for cable protection , supply and install synthetic rubber insulated mats 2 pint 5 mm thick for voltage upto 11kv for electrical purpose suitable for electrical shock and safety of sizes 2m x 1m complete , m and l for pcc 1 column 4 column 8 type d2 using 40mm graded stone aggregate in foundation and mass concrete , m and l for pcc 1column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , material and labour for chain link ms galvanisd fencing including line wires any mesh size and type to any type of standards rails straining bolts , m and l cutting the existing bituminous road concrete surface 150 mm thick to the required width and depth for laying of cable protection pipe , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 110mm outer dia , m and l for providing cable route markers cast iron round shaped disc of 150mm dia 3mm thick embossed with marking ht cable mounted on angle iron , m and l for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick ) /bid number: gem/2025/b/6881369 * /dated: 04-12-2025 & & / bid document1 / 20

CTN :42997234

22 Dec, 2025 NA

Mangalagiri - Andhra Pradesh

Tender For to establish common facility centre (cfc) for gold ornaments cluster at mangalagiri, guntur district of andhra pradesh - schedule a - establishment of casting unit & others, 3d printer wax (with air compressor) 1 no, online ups 10 kw 1no, magnetic stirrer with all attachments 2no, fridge 1 no, hot plate (for heating platform) 1no, 3d scanner 1no, vulcanizer 1no, wax injector with vacuum pump, air compressor & memory chip control 1no, normal auto-clamp wax injector with vacuum pump, compressor & memory chip 1no, burnout furnace 2no, casting machine 3-in-1 vacuum casting (650 lpm) 1no, pressure casting machine with online ups 1no, water jet machine 1no, water jet vapor honing machine 1no, falling table with suction motor 5nos, setting table with high-speed micro motors (for stone fitting and detailing) 5nos, novafab mega dlp 3d printer 1no, mira pro cam repairing software 1no, 5-flask investment mixer 1no, 2 kg vacuum pressure casting machine (st. louis 92) 1no, ipa recycling machine 1no, vertical sprue cutter (gold tree cutting machine) 1no, schedule b - establishment of chain making unit & others, box chain making machine 20 /1gm 2no, box chain making machine 20 /2gm 2no, flat and wire machine 1no, double head box chain cutting machine (rajaram) 1no, furnace annealing machine 1no, vibrator polishing machine 3 kg (pu coatin) 1no, wire diamond bits complete set 1 set, box chain soldering machine 2no, sitara chain making machines with dies (set of 4 variants) 4 variants, hammering machine (for jewellery chains) 1no, hammering block tools set of 4 sizes 4 variants, flame soldering machine (for jewellery chains) 2nos, diamond cutting machine with tool set 1 set, fixture (for chain holding and processing operations) 4no, ball chain making machine with dies set of 3 variants 3 variants, ball making machine (for chains) 5 variants, dd ball chain making machine with dies (for ball diameter 2 mm to 6 mm) 1 set, dd ball chain making machine with dies (for ball diameter 6 mm to 12 mm) 1 set, ball making machine entire setup 1 set, handmade ball cutting machine and tools 3nos, bulbul chain automatic soldering machine 1no, single ring chain making machine 4 variants, anchor chain making machine 4 variants, v-chain making machine (flat type) 4 variants, v-chain making machine (round type) 4 variants, gold furnace induction type (1 kg capacity) 1no, schedule c - establishment of ball making unit & others, fully automatic ball making machine with all supporting machines 1no, ball machine dies of different shapes and sizes 100 variants, ball dull machine 1no, schedule d - establishment of finishing services unit & others, electro filo polishing machine - 22-carat 1 no, electro filo polishing machine - 18-carat 1no, wax stone setting machine 1no, magnifier table lamp 1no, micro motor system (for filing, cleaning, and polishing) 5no, cnc diamond cutting machine for balls, beads, ovals and cylinders 1no, cnc diamond tools for ball cutting 100 tools, circular vibrator kg capacity 1no, magnetic polisher kg capacity (10 beaker, india make) 1no, steam cleaning machine 9 litres 1no, ultrasonic cleaning machine 25 litres 1no, magnetic polisher 1 kg capacity 1no, steam cleaning machine 9 litres 1no, ultrasonic cleaning machine 30 litres (heavy duty) 1no, circular vibrator 1 kg capacity 1no, rhodium plating machine 2 gm capacity with 3 3 litre beakers 1 set, drum polishing machine 25 kg capacity (pu coated drum with steel ball media) 1no, white rhodium dipping liquid 2nos, black rhodium dipping liquid 1no, rose rhodium dipping liquid 1no, white rhodium dipping liquid 2 mg per 100 ml 2 bottles, pen plating machine 1lts 2nos, gpc plating machine 3lts 1no, gpc plating liquid 1lts 20lt, buffing machine double motor type 2nos, enameling / coating furnace 1no, engraving and milling machine 1no, jooltool 3m polishing machine 2nos, schedule e - establishment of miscellaneous processes unit & others, roll press machine 8 double head 2no

corporations/Associations/Others

CTN :42973107

19 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of anchor chain laiwu size 76mm [acla0001] , spare-anchor chain and fittings grade 3, dia.76mm [sup0001]

CTN :42976010

18 Dec, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of [traction transformer complete with cooling system & accessories like h.t. cable along with protection shield in passenger compartment and underframe area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories as per attached specification suitable for 3 phase memu (medha, on-board).]

Anchor Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others