Latest anchor rod Tenders | Government anchor rod Tenders

State Government

CTN :41290801

22 Aug, 2025 6.00 Lacs

Ganderbal - Jammu And Kashmir

Tender For supply of oil filter , front hub oil seal , bulb , wheel cylinder , insulation tap , l t wire , horn , delphi fuel filter , fuel filter , suspension rubber , sparking plug , fuel filters , fuel water , bulb 24 v , bulb 24 v , differential oil , front check , rear check , relay 24 volt , fuel pre , tmc repair , clutch cylinder , brake and , accelerator clble , accelerator paddle , head light , front hub , rear hub , front tube , balancing rod , shock absorber , tube axle

State Government

CTN :41284399

11 Aug, 2025 3.50 Lacs

Dinajpur - West Bengal

Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin

State Government

CTN :41269944

06 Aug, 2025 2.87 Lacs

Murshidabad - West Bengal

Tender For supplay of tube well parts (activity id:- 92380853) - laying and jointing pvc pipe. heading, cylender, 1.5" pvc pipe, cylender rod (1.5"), planger (brss), cylender baket, 1.5" pvc filter, base, piston rod, 1.5" pvc delivery pipe (10ft/no), flanze set nut, base nut bolt, head nut bolt, handle, bucket, washer, piston nut bolt, bansal gum, 3" pvc pipe, 3" gi nipple, pump head set, 240v single phase dm coupled pump set crompton greave, 1.5" pvc socket, polytheen bib cock or stop cock

State Government

CTN :41276701

11 Aug, 2025 9.79 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of critical spares of esp 2x210 mw abb abl make boilers of unit no. 1 and 2 at sgtps, mppgcl, birsinghpur - particulars as per tender schedule, suspension tube with suitable bolt nut and washer (i.e.cap screw, guide sleeve,hex pipe nut), pressure sleeve, upper tie rod, lower tie rod, derm lifting mechanism complete assembly, cam and guide follower for derm, .

State Government

CTN :41276704

25 Aug, 2025 5.42 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of various spares of hydrogen plant of sgtps, mppgcl, birsinghpur. - particulars as per tender schedule, needle valve for cooling condenser drain line i) one end match from 10 mm ss line ii) other end is size (tag no. 12b1, b2)moc ss 316, fitting of copper tube for filling h2 gas from manifold to h2 cylinder suitable for 150 kg pressure (pegtail), suction hose for h2 compressor as per enclosed drawing, needle valve at gas filling line a&b steam for 10 mm ss tube line before xa, xf, xa filter.make global, mo cbl no. gv54.pnv, 10 m-s6l-p-t-sf, batch no. 404boae heat no. 1163, 6000/psi, moc ss 316, filter body drain valve (airmatic hp filter 350 kg/cm2) size bv bsp-f, water control valve make-aira/asco, dia port bsp-3/4 ,dia orifice -20mm, max working pressure -16 bar,dimensions as per drg ,a=170mm, b=44mm,c=100 mm, function normally closed ,material valve body bronze, pn -16,disk-brass ptfe insert bsp pilot port rod ss 304 ,pilot pneumatic specification-fluid water, temp fluid +5 c to 180 c,ambient +5 c to 60 c (complies with electrical standards nfc 79300), pressure regulator for hydrogen manifold make esab, diaphragms for pneumatic control valve 2 (50 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, diaphragms for pneumatic control valve 3 (75 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, high pressure hose pipe along with connectors at both end size length 1 mtr ( max working pressure -16 bar), ss tube (10 mm od,5 mm id), male connector 10mm od x10mm npt moc ss316, equal union 10mmx10mm od moc ss316, equal tee 10mmx10mmx10mm od moc ss316, nipple 10mmx1 moc ss316, reducer 1/2 x1/4 moc ss316, elbow 90 size 10mmmoc ss316, nut size 10 mmmoc ss316, ferrule in 2 piece10 mm moc ss 316, .

Co-operative

CTN :41281300

11 Aug, 2025 30.2 Thousand

Mehsana - Gujarat

Tender For supply of conctr term,bakelite,strip,hand drill machine,acc. elect.,lugs paste dowells,uv tube rod - 3000817, 24.000, connector terminal,material-bakelite,current rating-10a,additional information-strip ,isi make ., 3050242, 1.000, acc. elect.,lugs paste dowells 50gm, catlog no. gtz8785, 3202678, 10.000, uv tube rod ,12"8w tube rod milky, type - tuv8w,cap base-g5, ordering number ,928001104013, 3202679, 25.000

Central Government And Public Sector

CTN :39538738

08 Aug, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of spare parts of fire water diesel engine - rubber hose compressor outlet k24 turbo , hose for air cleaner , alternator 24v , bracket for alternator , set of joints 6sl9088t engine , banjo bolt m12x15 , copper washer 22x27 , adaptor m24x1 5m m10x15f , crank pulley 3 grooves 210 pcd , crank pulley finish , cylinder head bolt long , cylinder head bolt short , straight thr socket , copper washer 14x18 , cylinder head sub assembly , push rod assembly , cylinder liner assembly , dipstick assembly , teflon oil seal few , starter ring , fuel pipe feed pump to fuel filter , assly leak off pipe , high press pipe assembly , fuel pump , lube oil supply pipecrank case to fuel pump , special banjo boltlo supply to pump , copper washer 10x14 , feed pump , oil spray nozzle assembly 250 kva , assembly of lube oil filter header , centrifuge filter , lube oil pump , piston assembly , tappet , connecting rod assembly , lube oil cooler plate type , oil filler cap , rocker cover , sealing washer , joint rocker cover , rocker support assembly , oil supply pipe assembly , stop solenoid 24v energ run , suction tube , v belt avx 13 x 1562 l , hose turbocharger air outlet , joint for oil return pipe turbocharger non asbestos , water pump sub assembly , pipe , oil supply pipe sub assembly for t c , vent pipe sub assembly , banjo bolt hollow bolt , banjo bolt m14x15 , turbocharger , crankcase assembly , exhaust manifold , compression , exhaust , s i t c charges , kirloskar care super genuine oil 13 liters can , kirloskar care super genuine oil 5 liters can , spin on lube oil filter , fuel filter kit 11 ltr , v belt avx13 x 1015 length , v belt avx 13 x 1562 l , fuel pipe 80 14 b 1000 wb , air cleaner assembly dry 115 , hose radiator inlet 50 id , hose radiator outlet 60 id , hose clip , hose thermostat hsg to int pipe , hose t bolt clamp

CTN :41275025

11 Aug, 2025 NA

Kolkata - West Bengal

Tender For supply of supply of ac accessories : : - copper tube 1-2 inch with insulation , copper tube 1-4 inch with insulation , copper tube 3-8 inch with insulation , copper tube 5-8 inch with insulation , 4 core 2.5 sq mm cu cable , ac stand , wrapping , plug top , water pipe , socket , 25mm nitrile tube , 8 mm rod with washer , lbo joint , refrigeration gas r-32 , breezing rod, breezing gas miscellaneous

CTN :41273037

11 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of air filter , push rod seal , push rod tube seal , fuel pipe , turbo charger pipe , silencer advester rope

CTN :41281278

11 Aug, 2025 NA

Jodhpur - Rajasthan

Tender For supply of lv7 maruti shroud fan f f - lv7 maruti shroud fan , lv7 tata storme hose coolant tube to pipe , lv7 re chain and sprocket set , lv7 tata storme kit pad assy front , lv7 re brake shoe , lv7 tata storme hand brake cable , lv7 t 815 sensor , lv7 tata assy top cover , lv7 tata assy cu batt cable , lv7 tata cover push rod , lv7 tata assy cu batt cable ve comp

Anchor Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Co-operative

Central Government And Public Sector