Latest anchor shackle Tenders | Government anchor shackle Tenders

Central Government/Public Sector

CTN :45664895

14 Jul, 2026 NA

Hubli - Karnataka

Tender For corrigendum : supply of service connector of 2.5 sq.mm cross section for connecting railway carriage fan and light fittings as per item no.wago make or equivalent as per the technical data: (1) type of wiring: side-entry wiring. (2) total number of connection points: 2. (3) total number of potentials: 1. (4) connection technology: cage clamp. (5) actuation type: push-in. (6) connectable conductor material: copper.(7) solid conductor: 0.5 - 2.5 mm 2/20 - 16awg. (8) fine stranded conductor: 0.5 - 2.5 mm 2/20 - 16awg. (9) strip length: 9 - 11mm/ 0.35 - 0.43 inch. (10) width: 8mm/ 0.315 inch. (11) height: 15.5mm/ 0.61 inch. (12) depth: 42 mm/ 1.654 inch. (13) colour: grey. (14) fire load (mj): 0.099 (mj). (15) weight(g): 5(g). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45732506

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of vacuum filter spares & service-spare parts of & work for 10 x 20 vacuum filter ,brass zig-zag 2 long ,s.s binding strip ,s.s. perforated screen ss 304 13 x 10 salem ss 304 (weight 1.72 kg.) ,heavy duty railway hose pipe size: 2 bore x 18 long ,s.s. bolt x ,scrapper belt 5 width 8 ply ,lead wire 3/8 ,s.s. decking plate 1 x 10 (ss 304) ,s.s. capillary pipe with s.s. junction box six way & main connecting pipe junction box to vacuum distribution valve (complete set) ,s.s. divisional strip ,copper rivet size below:- ,size: 4mm x 12 mm ,size: 5mm x 15 mm ,pvc spray nozzle ,m.s. connector (hexagonal) both & thread ,reconditioning work ,repairing charges of dismantling, refitting of damaged capillary, nipple, junction box 6 way along with column pipe upto vacuum distribution valve all work should complete in all respect both portion of 10 x 20 rotary vacuum filter, damaged decking plates replacement & fitting work to be completed, all ss perforated screen dismantling & refitting after cleaning of decking plates & damaged decking plate replacement. hydraulic testing to be done capillary section inside drum as well as drum to made leak proof, insure the trouble free working throughout the season 2026-27 damaged ss perforated screen replacement work in 2 nos. other filters (approx = 20 nos.)

CTN :45725391

15 Jul, 2026 NA

Ghatampur - Uttar Pradesh

Tender For bakli wooden strip for hopper size 30inchx2point5inchx1by2inch lbh , bakli wooden connecting rod for sugar hoppers size l8inch x w6inch x t4inch

Central Government/Public Sector

CTN :45382837

04 Jul, 2026 NA

Kamrup - Assam

Tender For corrigendum : repair/maint of external electric supply system, distribution lt panels with connected items and allied services at other than basistha area under ge guwahati. - excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and as directed., returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and as directed., removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed., supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (note : punned thickness shall be measured)., m&l for bricks common burnt clay, building brick, sub class b designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed., m&l for supply and fixing / laying in replacement, connect, test and commissioning of lt under ground cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of ms saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.note : manufacturers test certificate shall be submitted alongwith rar/fb to engr-in-charge., (a) 95 sqmm x 3.5 core, (b) 70 sqmm x 3.5 core, (c) 50 sqmm x 3.5 core, (d) 25 sqmm x 3.5 core, supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 630 amps, 50ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 400 amps, 36 ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 250amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 160amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 125 amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 100amps, 26ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 63amps, 16 ka breaking

Central Government/Public Sector

CTN :45704059

11 Jul, 2026 32.43 Lacs

Bangalore - Karnataka

Tender For tender for supply of c422alh 1224 1228 machining and supply of metallic detail parts 201c 621h 2000 201 - shim (trim chamber) , bracket-top , bracket-top , bracket-bottom , bracket-bottom , channel lh top , channel rh top , bracket , channel lh bottom , channel rh bottom , u plate , angle spring holder , tension spring , spigot fitting , taper shim , bracket , bracket , pin , shaft , bush , roller support , roller support , bearing pin , roller support plate , bracket (middle roller assy.) , pin (middle roller assy.) , hor. roller bracket -lh(middle roll , horizontal roller bracket rh , roller support -lh , roller support rh , bearing pin , counter sunk pin , bracket , bracket -lh(roller bracket) , handle lever , locking pin , guide bracket , bell crank lever-single leg , bell crank lever-double leg , lever support (plain) , lever support (stepped) , spacer , spacer , angle , handle , handle -locking mechanism , bracket , shaft , locking pin extra length , link tube , link tube , link tube , link tube , link tube , link tube , link tube , link tube , bracket (latch)-lh , bracket (latch)-rh , angle-latch bracket , back plate , back plate , wedge , plate , shim , shim , t-section , bracket latch-lh , plate , spring clip latch , tube , strip , connecting plate , plate , plate , hinge fitting(upper)-lh , hinge fitting(upper)-rh , hinge fitting-lh (lower) , hinge fitting-rh (lower) , fitting , washer , lever locking top & bot , lever-locking mech-pilot door , pin (locking mechanism - pilot door , sleeve at handle , sleeve , sleeve bottom , pin (locking mechanism - pilot door , sleeve , lever-locking mech-pilot door , washer , bush , lever-locking mech-pilot door , pin (locking mechanism - pilot door , rod small , fork-end , taper pin (locking mechanism - pilo , guide teflon ps 25640 , rod-lh (locking mechanism-pilot door) , rod - rh (locking mechanism - pilot , handle-lh-locking mech-pilot door , handleinside , lever , lever (locking mechanism) , pin (locking mechanism - sliding do , sleeve , sleeve bottom , pin (locking mechanism - sliding do , bush , lever-locking mech-sliding door , handle-lh-locking mech-sliding door , handle-rh-locking mech-sliding door , rod , rod (locking mechanism) , cover plate , cover plate , fork-end , end fitting , countersunk bolt , bracket ( teflon) , bracket ( teflon) , hs pin , hs pin , taper pin , clip (clam shell door ) , strip cover , strip cover

CTN :45138932

01 Jul, 2026 NA

Siliguri - West Bengal

Tender For bid to ras supply of ord store d d - lv7 stln vf f-2208800 combination switch , lv7 maruti 12181m82030-025 bearing set connecting rod , lv6-mt6 12761m70c20 belt timing mpfi , lv7 maruti 16100m72f00 pump assy oil , lv7 maruti 18117-830a0 valve assy solenoid , lv7 maruti 83810m82ca0 weather strip door outer , lv7 maruti 84531m80121 glass front door rh , lv6 mt1 8465-002867 wallet water proof for vehicle publicati , lv7 stln 2530-72-0487095 brake shoe assy front , lv7 stln vf f-j106300 double lever combination switch , lv7 maruti 11141m86512 gasket cylinder head

Central Government And Public Sector

CTN :45689325

06 Jul, 2026 NA

Damanjodi - Odisha

Tender For supply of 1 . 85065211150 antenna for motorola xir p8668i vhf hand setmake motorola only. , 2 . 85065211290 internal speaker for motorola gp338 vhf set make motorola only. , 3 . 85065211300 belt clip for motorola gp338 vhf set make motorola only. , 4 . 85065211310 display assemblyfor motorola gp338 vhf set make motorola only. , 5 . 85065211320 cabinet without lcd display for motorola gp338 vhf set make motorola only. , 6 . 85065211330 video strip for motorola gp 338 vhf set make motorola only. , 7 . 85065211340 audio strip for motorola gp338 vhf set make motorola only. , 8 . 85065211220 dc cable st for motorola gm338 vhf stn part no hkn 4137a make motorola only. , 9 . 85065211260 ptt switch with pad for motorola gp338 part no 1386324z01 by 7586265z02 make motorola only. , 10 . 85065211270 key pad for motorola gp338 part no 7580532z01 make motorola only. , 11 . 86592000120 external voice recording unit for emergency alarm system along with required cable , 12 . 82200201200 outdoor type rg 217 rf cable with following , 13 . 82201010800 high gain antena with its mounting arrangement and accessories , 14 . 82201011300 antenna suitable for motorola vhf handset model gp338 by gp 328 make motorola only. , 15 . 85065211280 lcd display with suitable connecting ribbon cable or any accessory to connect in the motherboard for motorola gp338 vhf set , 16 . 82200201210 male end connector for vhf rg 217 coaxial cable. , 17 . 82202001050 microphone for vhf fixed base station complete with spiral chord and connector suitable for motorola gm338 fixed analog base station. , 18 . 85005065010 ni-cd battery 7.2 v nickel-metal hydride battery suitable for motorola vhf handset model gp338 make motorola only. , 19 . 85065211240 volume knob for motorola gp338 vhf handset make motorola only. , 20 . 85065211250 channel knob for motorola gp338 vhf handset make motorola only. , 21 . 82201010970 duplexer suitable for motorola slr5300-50 w digital vhf repeaters by cdr 300 50 w analog repeater with all accessories

CTN :45688862

16 Jul, 2026 57.20 Lacs

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of guide ring , elastomeric spring , shaft intermediate , nozzle 11 hole , hand pump , spring washer , washer spring b12 , rotary seal , rubber mount , buffer , contact cleaner spray , circlip , circlip 72x2.5 , pressure monitor , plug , screw , screw , screw , screw , cylinder roller bearing , butting washer s63 x 80 din 988 , toothed quadrant , screw , turbo charger , washer , o ring , o-ring , o ring , oil filter , air filter element , woodruff key 2 x 3 , 7 din 6888 , rectanglr-sect ring , ring sealing a16x20 , ring sealing (crank case) a48x55 , shaft seal , shaft seal , tachometer , radial-lip shaft seal , crankshaft , seal 50x78x1.5 din71511 , hylomer sq 32m , sealing paste gd block , gasket , pipe , sealing tube , valve inner , exhaust valve , valve inlet , seat ring valve inlet , bush guide , guide tube assy , gasket , water pump shaft , pipe , gasket , seat ring valve , spring retainer , leak off fuel line , press relief valve , pressure relief vv 5.5 bar , pressure relief vv 2.5 bar , pipe , retaining tube , thrust ring , o ring , impeller , o ring , gasket , connecting piece , sealing ring modified , oil pump , valve exhaust , valve guide , packing plate , nozzle holder with nozzle , ring sealing , cylinder head w/valve , cover , spacee plate , track ring , pushrod exhaust , gasket , gasket , damper strip , fuel priming pump , gasket , impeller , gasket , high pressure line , gasket , hp line , mtu test kit , complete , o ring , sleeve rubber , o ring 9.2x2.62 , o ring 11x25 , o ring 15x5 , o ring , o ring 31x2.5 , o ring 32x4 , o ring 36x5 , o ring 37.46x533 , o ring 46x2 , o ring 75x5 , o ring 80x6 , o ring 84x3mm , o ring , o ring 90x4 , o ring 105x3.5 , o ring 18x4 , o ring 6x2.5 mmn 429 , o ring , o ring , gasket 57 x 2 mmn 489 , hose line , cam shaft drive gear , idler gear assembly , bearing bush , spare parts kit , pump element , plate , spare part kit k37 , bolt , washer , compensating washer , compensating washer , compensating washer , shim , compensating washer , compensating washer , shim , spring , o ring 76 x 2.5 , coloured screw , hose clamp , adaptor , element fuel filter f.f-0023 , hose clamp , nut , snap ring , rubber bellows , thermocouple , trackball , tachometer , pressure sensor , pressure sensor , top compr.ring st w6 , fuel pump complete , screen , mpc1-01 computer , plug-in board , bib 1 , plug in board cib 3-10 , display dis 10-01(5105381275/s0004) , valve exhaust std floating bridge , ros 2-03 control lever , multi led t5 , 5k24 red , wiring harness to injector , module mcs-5/pim3 , module pim2 measure/monitor mod , modular system , plug-in-board , housing , test unit , hp pump , electronic gover ecu4-04 (e5275304760/76) , sea water pump , starter , injector , bearing body , tester , pressure sensor , gasket

CTN :45690210

10 Jul, 2026 4.31 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of amc of stiching machine , amc of sugar stacker machine , spares of sugar stacker machine return roller od 51mm , foot switch element , m s slate 1 x 2 x 12 , return roller shaft , chain for slate conveyor , counter scale screw 1 4 x 1 1 4 , split pin 1 16 x 3 4 , pulley for rope wire , clamp for rope wire , spare for sugar stacker ist type deobandh make ms roller for stacker , m s washer size 1 , split pin 1 8 x 1 1 4 , carriage bolt 3 8 x 2 complete with washer and nut , wooden slate , m s slate with bush washer complete , iind type m s roller 19mm bore , spares of stitching machine pressure bar rod , pressure foot assembly , needle bar with nut , looper shaft , throat plate , feed dog , bush set , screw set complete , tension assembly , looper drive lever , needle bar connection , feed rocker , looper avoid ecc assembly , looper , needle lever ball bearing , feed lift ecc fork , feed lift assentic , feed drive ecc assembly , looper rocker , needle g b 250 , foot switch for sugar bag stiching machine , dye pressed strip fitted with wood complete , shell assembly , feed bar , needle bar connection link , needle lever ball link assembly , needle lever assembly , link assembly , return roller with shaft , uhm slate , uhm strip 5 to 6 mm , crank connecting rod , assembly for needle lever , link assembly for connection

Anchor Shackle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector