Get complete information related to latest Anchorage Lock Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Anchorage Lock Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Anchorage Lock Tenders.
Tender For supply of pedestral , anticockroach trap grating round frame , flush kit complete internal fitting ptmt float valve 15mm with epoxy coated aluminium rod and high density plastic ball , ply wood 8 feet x4 feet x6mm bwr gde as per is 303 , urinal with fixing accessories , flush kit complete internal fitting ptmt float valve 20mm with epoxy coated aluminium rod and high density plastic ball , rotational moulded polythelene water storage tank 3 layer cap 1000 litre white colour , door magnet catcher , mortise lock handle set 100 mm , cp ss toilet roll holder with flap , glass shelf 600mm long , rotational moulded polythelene water storage tank 3 layer cap 500 litre white colour , mortise lock handle set 160 mm , cp ss grab bar 300mm long , pvc corrugated waste pipe 32mm x 1150mm , pvc urinal waste pipe 32mm x 800mm , wc indian type 580x440mm , corner glass shelf with bracket , basin counter table top type , water storage tank cover lid white , ss curtain brackets , door stopper , ss studs with spacer 1inch x 1 inch for fixing glass mirror , steel braided connection pipe with cp brass nut 18 inch for hot water , transparent acrylic sheet for windows 5mm thick , ss jet spray butterfly with braided tube 1.5m , steel braided connection pipe with cp brass nut 24 inch for hot water , ply wood 8 feet x4 feet x4mm bwr gde as per is 303 , frosted obscure glass pane 5mm thickness , cp ss shower basket , ss studs with spacer 1 point 5 inch x 1 inch for fixing glass mirror , ss peg set of three , ptmt bib cock 15mm with flange , pvc corrugated waste pipe 32mm x 800mm , cp shower arm 12 inch , prelaminated particle board 8 feet x4 feet x19mm , pvc connection pipe with cp brass nut 18 inch , pvc connection pipe with cp brass nut 24 inch , ss full overlay concealed cabinet hinges 35mm 165 degree , braided hose 600mm long with m10x1 nipple, 15mm nut o ring and rubber washer suitable for tall boy basin mixers , ss peg set of six , steel braided connection pipe with cp brass nut 30 inch for hot water , aluminium sliding door bolt 200mm complete set with brackets , g.i. pipe 15mm medium grade , pvc connection pipe with cp brass nut 30 inch , pvc collapsible waste pipe 40mm x 800mm , aluminium door handle 150 mm , aluminium sliding door bolt 250mm complete set with brackets , braided hose 450mm long with m10x1 nipple, 15mm nut o ring and rubber washer suitable for basin mixers , cylindrical door locks with 3 keys , gi pipe 20mm medium grade , rubber beading for doors windows for pest snake control , ss butt hinge 100mm , french polish 400 ml pack , pvc collapsible waste pipe 32mm x 800mm , aluminium tower bolt 250mm , ss grating round 3 inch , ss butt hinge 150mm , aluminium tower bolt 150mm , ss grating round 4 inch with hole , wall putty 20 kg , upvc pipe 25mm , upvc union 25mm , ss grating round 3 inch with hole , aluminium door handle100mm , aluminium hasp and staple , g.i. union 20mm dia , upvc pipe 20mm , upvc pipe 15mm , ss grating round 4 inch , upvc union 20mm , gi union 15mm dia , gi gate valve 15mm dia , upvc union 15mm , m seal 100 gm pkt , teflon tape for plumbing , glazing putty for fixing glass pane , white cement , fevicol for wooden work 1 kg pack , ss screw 3 oblique 4 inch , upvc reducer 20 and 25mm , upvc tee 25mm , upvc elbow 25mm , gi tank nipple 20mm dia , gi socket reducer 15 and 20mm dia , gi tee 20mm dia , gi 20mm plug , gi nipple 20mm dia 2inch long , upvc reducer 15 and 20mm , upvc tee 20mm , nails 2 and half inch , nails 3 and 4 inch , gi elbow 20mm dia , gi socket 20mm dia , gi tank nipple 15mm dia , gi tee 15mm dia , upvc elbow 20mm , ss screw 1 inch 1 and //bid details 2 / 118 hald inch 2 inch 2 and half inch each size 4 kgs , gi nipple 15mm dia 2 inch long , gi 15mm plug , upvc tee 15mm , gi elbow 15mm dia , gi socket 15mm dia , upvc elbow 15mm , nails 1inch 1 point 5inch 2 inch and 3inch size 1 and half inch 8 kgs and rest each size 4 kgs , teak wood beading edging half round w 18mm x t 6mm , ply wood 7 feet x3 feet
Tender For bid to ras corrigendum : tender for supply of furniture items - aluminum knob , readymade tw side for teapoy , thinner for polish 4 liter packing , lakh dana , readymade timber side rails for chair dining , touch wood in 1 ltr pack , readymade timber back legs for chair dining , pu polish , readymade tw flat batten , primer wood in 1 ltr container , plastic laminated sheet teak face , readymade tw flat batten for table dining six pers , locks 65 mm 6 levers , readymade tw flat batten 48x2x1 inch for table dining six pers , knob for cub board 40mm , fevicol in 1 kg , readymade timber front legs for chair dining size 18x1x2 inch , fevicol in1 kg sr hetax , readymade tw flat batten 48x2x1 inch for table writing , paint enamel white in 1 ltr pack container , readymade legs for teapoy , paint enamel smoke gray , readymade tw flat batten , paint enamel olive green , castrel wheel pvc 50 mm dia , black screw full threaded 20mm , plywood , readymade tw side rail for teapoy 24x2x1 inch , readymade tw side rail for teapoy 18x2x1 inch , black screw full threaded 45 mm , chandras for polish , readymade tw flat batten , looking mirror , liquid varnish , mdf board , black screw full threaded 75 mm , paint enamel black in 1 ltr pack container , looking mirror 5mm thick for dressing table ladies , black screw full threaded 35mm , readymade tw legs for table peg , black screw full threaded 65 mm , black screw full threaded 15 mm , black screw full threaded 50 mm , paint enamel red oxide , pegs aluminum 100 mm , knob decorative acrylic , mdf board , readymade timber seat back support rails , pegs aluminum 125 mm , cloth abrasive no 80 , plain mdf board one side teak face other side lamination , plywood bwr gde as per is 303 , black screw full threaded 25 mm , plain mdf board both side colour teak face lamination , butt hinges ms 75 mm , pencil carpenter 10 nos in each pkt , file triangular 6 inch , plastic laminated sheet white colour , plywood case one side teak face , ply wood , cloth abrasive no 100 , ply wood , nails wire 50 mm no 14 , nails wire 65 mm no 14 , plastic laminated sheet 1 mm thick , paint black japan , ss hasp and stapple 125 mm , nails wire 15 mm no 20 , nails wire 60 mm no 14 , plywood , piano type hinges long stainless steel , ss door handle 100 mm , nails wire 100 mm no 14 , nails wire 35 mm no 17 , ss hasp and staple 75 mm , hasp & stapple aluminum anodized , ss hasp and stapple 100 mm , nails wire 20 mm no 20 , nails wire 40 mm no 14 , brush painting 100 mm , nails wire 75 mm no 14 , nails wire 32 mm no 17 , hdhmr board , nails wire 25 mm no 17 , brush painting 75 mm , brush painting 50 mm , telescopic channel , pvc beading
Tender For supply and installation of video wall and accessories at sports club kadappakkada.-general electronics work - electronic equipment, od208783/2025-2026:supply and installation of p4 outdoor led video wall of size 42ft (w) x9ft(h), having pixel configuration 1r1g1b, pixel density min 62,500 dots, brightness greater or equal 4,500 nits, refresh rate: greater or equal 3840 hz, viewing angle horizontal greater or equal 140 degree, vertical greater or equal 140 degree, weather proof, energy efficient display suitable for outdoor installations. include adequate number of p4 led modules each module have size of 320 mm 160 mm, resolution 80 40 pixels, receiving cards (1 card for 8 modules) and power supply (one 40a power supply for 6 modules) for each module, video processor having better color calibration facility, necessary conduits, cables, connectors, clamps, stand etc as per site condition. warranty 3 years., od208789/2025-2026:supply and installation of motorized weather proof aluminium shutter/protective cover box for the outdoor video wall, which automatically closes when not in use. include all the floor cutting, welding etc as per the site condition. warranty 3 years., od208815/2025-2026:supply and installation of playback server with following specification - processor: broadcom bcm2712 quad-core cortex-a76 (2.4 ghz), gpu: video core vii (dual 4k at 60hz), memory: 8 gb lpddr4 ram expandable up to at least 32gb, hard disk: 256 gb ssd, operating system: debian linux, connectivity: lan, dual band wi-fi, bluetooth 5.0, ports: hdmi, usb 3.0/2.0, power: usb-c (5v/5a less than15w), control: web dashboard / ssh / vnc. warranty: 3-year comprehensive onsite warranty. preferred make: novasign or equivalent, od367666/2025-2026:supply and installation of laptop with following specification - processor: intel core i5 1135 g7 at 4.20 ghz, 4 core, 8 mb cache tdp-down 12w memory: 8 gb ddr4 ram expandable up to at least 32gb hard disk: 512 gb ssd display: antiglare full hd led backlit display display size: 14 inch wireless connectivity: integrated wireless b/g/n, integrated bluetooth speaker: integrated stereo speaker keyboard: keyboard with touch pad camera: integrated hd camera audio: integrated expansion port: 3 usb port (at least two number of usb 3.0 and one number of type c) ,10/100/1000 ethernet card, hdmi, 1head phone/microphone e combo or separate and other standard features power supply: 230v, 50hz ac supply with rechargeable battery pack comprising of li-polymer battery/ li- ion polymer battery mouse: optical scroll mouse carry case: backpack weight: less than or equal to 1.7kg (weight without charger) warranty: 3-year comprehensive onsite warranty including battery and charger certification: rohs compliance and bis for product operating system: windows 11 home preferred make: dell, acer, hp or equivalent, od208819/2025-2026:supply and providing of 19 inch 15u floor mounting industrial grade powder coated weather proof network rack with one sliding tray, front glass door and cooling fan with pdu, double side open, rolling wheels locks. warranty for 3 years preferred make: d-link, net rack, president, rittal, valrack or equivalent., od367668/2025-2026:supply and installation of six-input mixer having 2 x xlr- combo mic/line inputs, xlr and trs stereo outs, phantom power+48 v switchable, channels 1, 2, hpf 80 hz, 12 db/oct (mono channels), frequency response 20 hz to 20 khz 0.5 db. warranty 3 yearspreferred make: yamaha, behringer or equivalent, od211591/2025-2026:supply , laying, certification and documentation of 23 awg cat-6 utp 4 twisted pair sheathed copper wire cable that can support data transfer rates of up to 1 gigabits, cable having lszh capability through the existing conduit and casing and capping as required. preferred make: actassi, belden, r and m, molex or equivalent., od367675/2025-2026:supply and installation of 2 way bi amplifier powered speaker minimum 120w output power, 75w lf and 45w hf, frequency response (minu
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite
Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl
Tender For supply of staff cloth locker as per drawing no. goc/p/sk-3-14988, alt.1, note: (1) all dimensions are in mm. unless otherwise stated. (2) all sharp edges are to be rounded off. (3) all fabrication by welding. (4) the door of top left locker not shown to give clarity. (5) material:- the side, back, top, bottom, partitions & shelves of the locker are to be made out of 20 swg mild steel sheets. door to be made out of 18 swg mild steel sheets. the steel sheets are to be strengthened where ever necessary. the hanger rod is of buffed aluminium tube - dia 20 & 2 mm thick. pedestal to be stiffened. drawer below shelf to be provided with spring loaded self locking & release arrangement. to be locked while sliding & released while sliding out. (6) finishing: the finishing should be as per clause 8 of is : 3314 - 1984. (7) 4 nos of 50mm size godrej make padlocks (navtal locks) with 3 keys to be supplied with each locker. (8) hooks are to be provided in each locker. [ warranty period: 24 months after the date of delivery ] ]