Latest angle rod Tenders | Government angle rod Tenders

CTN :45724940

10 Jul, 2026 1.50 Lacs

Bathinda - Punjab

Tender For supply of rod welding hard facing , steel angles , rod welding hard 5mm , steel mild , thinner , paint rfu spr black , paint rfu redoxide , paint rfu olive green , paint rfu white , abrasive paper emery , leather cloth black , plywood general purpose , plywood 5 ply , lt wire , sheet cellular , seal plain coupling , hex nut , hub seal , washer spring , seal plain , hoe assy rubber 200 long , hoe assy rubber 300 long

Central Government/Public Sector

CTN :45702711

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no.98030309.ferrous scrap consisting of condemned and unserviceable fabricated/loose angles/channels/plates/ sheets/ frames/chequred plates, blower covers/housings, racks,grill gates, trays, fabricated stands and fencings, ms/ gi pipes and tanks of sorts and sizes,fabricated pipe posts , tables, weldmesh frames, control panel frame boxes, control boxes ,battery boxes in full or broken condition,vrla cell trays, hand brake wheels, control board stands, radiator frames/grill,radiator end covers, fabricated packing stand, brackets of transformers ,push rods ,blower leaf , control panels, lube oil filters, loco cutup parts, ms/gi sheets, oil cooler covers, cabin side wall cut pieces, lube oil cooler casings ,window frames,lube oil cooler top covers , sand boxes,after cooler casings , wagon doors,trolley,foot steps, fabricated wheel stands,battery box channels, vertical garden stand, decorative flower pot stand, diesel tank, furnace parts, i beams, tmt bars, fabricated stools, cowls, radiator packing angles,rods,brake beams, bolster stands, ladders, reservoir tanks,chequered plates and other similar items heavy cutup in nature with or without original attachments note: [1] cutting is permitted. [2] purchaser should arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest and advised to follow the all safety aspects as per rule in force. [3] non ferrous items if any should be removed and returned to railways. [4] crane loading is permitted.

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

corporations/Associations/Others

CTN :45636758

06 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of steel scrap class (c) mixed verities consisting of rusty angle/rods/etc,steel scrap class (b) consisting of end peices, etc

CTN :45087993

21 May, 2026 NA

Udhampur - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of quantity c c - c rod , brass foil , s angle , rod w c , rod w silocon , solder soft f , steel bar , solder soft b , solder soft c , s alluminium , wire steel , leaded brass , phosphor bronze , rod w steel , wire steel spring , e w steel high , wire steel mild , sheet hard

CTN :45063494

01 Jun, 2026 NA

Bhawanipatna - Odisha

Tender For corrigendum : supply of cnc tools c c - shank twist drill- dia 8.2 , parallel shank twist drill- dia 8.3 , parallel shank twist drill- dia 8.4 , parallel shank twist drill- dia 8.5 , parallel shank twist drill- dia 8.6 , parallel shank twist drill- dia 8.8 , parallel shank twist drill- dia 9 , parallel shank twist drill- dia 9.4 , parallel shank twist drill- dia 9.5 , parallel shank twist drill- dia 9.6 , parallel shank twist drill- dia 9.7 , parallel shank twist drill- dia 9.8 , parallel shank twist drill- dia 9.9 , parallel shank twist drill- dia 10 , parallel shank twist drill- dia 10.1 , parallel shank twist drill- dia 10.2 , parallel shank twist drill- dia 10.5 , parallel shank twist drill- dia 10.6 , parallel shank twist drill- dia 10.8 , parallel shank twist drill- dia 10.9 , parallel shank twist drill- dia 11.4 , parallel shank twist drill- dia 11.5 , parallel shank twist drill- dia 11.8 , parallel shank twist drill- dia 12 , parallel shank twist drill- dia 12.2 , parallel shank twist drill- dia 12.4 , parallel shank twist drill- dia 12.5 , parallel shank twist drill- dia 12.6 , parallel shank twist drill- dia 12.8 , parallel shank twist drill- dia 12.9 , parallel shank twist drill- dia 13 , hss center drill- a3.15 x 8 , hss center drill- a2.5 x 6.3 , hss center drill- a4x10 , hss center drill- a5x12.5 , hss center drill- a6.3x16 , hss center drill- a2x5 , hand reamer- 4h7 , hand reamer- 5h7 , hand reamer- 6h7 , hand reamer- 8h7 , hand reamer- 10h7 , hand reamer- 12h7 , hand reamer- 14h7 , hand reamer- 16h7 , hand reamer- 20h7 , machine reamer- 16h7 , machine reamer- 18h7 , machine reamer- 20h7 , machine reamer- 3h7 , hand tap set- m4 x 0.7 , hand tap set- m5 x 0.8 , hand tap set- m6 x 1 , hand tap set- m8x1.25 , hand tap set- m10 x 1.50 , hand tap set- m12 x 1.75 , hss dies and die nut- m4 x 0.7 , hss dies and die nut- m5 x 0.8 , hss dies and die nut- m6 x 1 , hss dies and die nut- m8x1.25 , hss dies and die nut- m10 x 1.50 , hss dies and die nut- m12 x 1.75 , hss dies and die nut- m14 x 2 , hss dies and die nut- m16 x 2 , hss dies and die nut- m18 x 2.5 , hss dies and die nut- m20 x 2.5 , end mill cutter-solid carbide, dia - 3 , end mill cutter-solid carbide, dia - 4 , end mill cutter- solid carbide, dia - 5 , end mill cutter-solid carbide, dia - 6 , end mill cutter-solid carbide, dia - 8 , end mill cutter-solid carbide, dia - 10 , end mill cutter- solid carbide, dia - 12 , slot drill - solid carbide, dia - 5 , slot drill - solid carbide, dia - 6 , slot drill - solid carbide, dia - 8 , slot drill - solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 12 , ball nose cutter-solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 8 , ball nose cutter-solid carbide, dia - 6 , ball nose cutter-solid carbide, dia - 4 , chamfer end mill-solid carbide, dia - dia 10x90 degree , wood ruff cutter-hss, 19.5x6 , dove tail cutter-hss, 30x45 degree , lapping paste, 1 pkt - 400grm , round die handle - 1 inch , round die handle - 13 by 16 inch , round die handle - 1 and half inch , remear and tap handle - small , remear and tap handle - medium , remear and tap handle - large , dead blow hammer - 2lbs , oil stone triangular - 1 by 4 inch x 6 inch , parallal clamp - 6 inch , parallal clamp - 4 inch , dowel pin - dia 8x 50mm , dowel pin - dia 8x 100mm , dowel pin - dia 6x 45mm , dowel pin - dia 6x 30mm , dowel pin - dia 6x 50mm , toolmaker vice pin type - tmvp100 , goose neck clamp - ngc12 , //bid details 2 / 94 stepped strap clamp - nssc12-100 , moulding clamp- with clamping t-bolt and flanged nut - nmc-12t , step block - nsb-2 , adjustable supports plates - nasp-250 , single point cutting tool blank-hss - 1 by 2 inch x 1 by 2 inch x 6 inch , single point cutting tool blank-hss - 1 by 4 inch x 1 by 4 inch x 6 inch , face mill cutter - ygrd12-80z7c27b , face mill cutter - ygrd12-63z6c22b , face mill inserts - rdkt 12 04 mo

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :44996186

05 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of steel angle , rod welding , lt wire red 90 mtr , sheet carbon galvanised , rod welding hard facing , fevicol sr 998 , alcohoal isopropyl

Central Government And Public Sector

CTN :44514095

25 Apr, 2026 NA

Narora - Uttar Pradesh

Tender For corrigendum : supply of sleeve housing piston,sealing ring,nut,sleeve housing,sleeve,buffer spring,sensing ring,shuttle unlatch cylinder housing,piston,cylinder cover,shuttle latch,guide pin,bush,switch actuator ring,cylinder,piston,pin,shuttle retainer,sealing ring,spacer,ball,cover bushing,ball liner,valve body liner plain,valve body liner stepped,bearing plate,spring thrust ring,spring thrust plate,belleville washer,bushing,seal plate,valve body liner,dowel,dowel,retainer,sensing ring segment,pawl,modified spring retainer,spring,top bearing housing,bottom bearing housing,spacer top bearing,top bearing cover,spacer bottom bearing

Central Government/Public Sector

CTN :44882335

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no.98030309.ferrous scrap consisting of condemned and unserviceable fabricated/loose angles/channels/plates/ sheets/ frames/chequred plates, blower covers/housings, racks,grill gates,rolling shutters and its parts, trays, fabricated stands and fencings, ms/ gi pipes and tanks of sorts and sizes,fabricated pipe posts , tables, weldmesh frames, radiator fan housings, control panel frame cutups parts, dust bins, control boxes ,battery boxes in full or broken condition,vrla cell trays , traction motor cover plates, ms sheet doors with frames , hand manual doors,rectifier covers, radiator frames,radiator end covers, alco pipes,sump doors, brackets of transformers ,push rods ,blower leaf , control panels, berth iron frames, sump covers,lube oil filters, loco cutup parts, driver seats,traction motor covers, ms/gi sheets, oil cooler covers,test panels,cabin side wall cut pieces, ,window frames,lube oil and water line pipes,lube oil cooler top covers ,water expansion tanks ,manifold covers,cattle guards, sand boxes ,alco loco driver chair frames, wagon doors,gutters,cabin doors, battery box tray, loco motive pipes,battery box doors,manifold stands , fabricated wheel stands,tressels, air moist,mr tanks, radiator packing angles,rods,steam loco cut parts, , carriege doors,old platform, bearing cleaning plant,after cooler casings,lube oil cooler casings, nmg doors,side hood plates,sliding doors,air duct assembly, fuel oil headers,loco head light covers and other similar items heavy cutup in nature with or without original attachments note: [1] cutting is permitted. [2] purchaser should arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest and advised to follow the all safety aspects as per rule in force. [3] non ferrous items if any should be removed and returned to railways. [4] crane loading is permitted.

Angle Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector