Latest angle frame scrap Tenders | Government angle frame scrap Tenders

Central Government/Public Sector

CTN :45431599

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s mechanical track jack, ball bearing, pad lock, tap measuring, pipe wrench, weight, different offsize spanner such as ring spanner, box spanner, double ended spanner, center punch, chiesel, tube, nose plier, cut plier, offsize screw driver, hand hammer, offsize files, hand crimping tools, piston sleeve, draw vise, rail thermometer, bench vice, swivel jack, level spirit, single sleeve pully, offsize pully, torch, stop watch, chemphering m/c, hand drill m/c, chain saw, screw crimping tools, allen key set, wire guage, three one tester, etc (location b/w godown no. 1 & 2) delivery- by weight

CTN :45383984

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger, anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box, laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous), bottom casting, lower spring beam, oxy cut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke, hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any nonferrous. qty-132mt. location-east of vm road in ncb-11.

CTN :45362896

05 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - pl no.98057054, sc. melting gr.d consisting of foot plate, gi pipe of diff. dia in diff. sizes, gi bond, xpm net with angle, iron door, grill door, tie bar in sorts and sizes rail dolly and dip lorry, ms plate, ms rod, ms flat, name board, ms grill, ball bearing trolley, nut and bolts, cut pieces of ms anle and channel, ms bar, rolling shutter, ms roller, tie bar of sorts, cut pcs of ms bar and hook, ms bond ms board, clamp, collapsible gate, ms grill, lhb disc holder, ms hanger ms sheet, cond. bottom block, lifting tackle in cut pcs, base plate, gi tower frame-pipe, gi tube, gi ohe parts of sorts, gi guy rod, ms fencing, number plate and other ms items in sorts and sizes. condition- purchaser crane allowed. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

Central Government/Public Sector

CTN :45246586

01 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - scrap miscellaneous items fe & n/fe (1)lot no-1, cls panel 60/150 amp., 12nos, fe-258kg, al-24kg (2)lot no-2, (a)led tubelight fittings 20/22 w, 250nos, fe-100kg (b)led street light fittings of different wattage, 180nos, fe-18kg, al-90kg (c)indoor/outdoor street light fittings, 300nos,fe-375kg (3)lot no-3, (a) a.c ceiling fans 1200mm, 378nos, fe-756kg, cu-56.7kg, 45.4kg (b) a.c ceiling fans 1400mm, 40nos,fe- 100kg, cu-11kg, al-6kg (c)air circulator fan 400/600 mm sweep, 38nos, fe-171kg, cu-13.3kg, al-15.2kg (4)lot no-4, (a)submersible pump starter cap. 2hp, 10nos, fe-5kg (b)horizontal pump, 03nos, fe-60kg, cu-6kg (c)geyser 25/35 ltr., 06nos, fe-36kg, cu-18kg (5)lot no-5, (a)battery 12v/45ah, 06nos, al-2.4kg (b)battery 12v/65 ah, 05nos, al-2kg (c)scrap car battery, 02nos, cu-0.8kg (6)lot no-6, (a)pvc burnt aluminium cable, 30.5 m, al-930kg (b)aluminium armoured cable, 908 m, al-545kg (7)lot no-7, (a)scrap copper, cu-146.00kg (b)scrap iron nut-bolt, 50nos, fe-2.5kg (c)ball bearing, 157nos, fe-23.55kg (d)scrap bush bearing, 158nos, fe-23.70kg (e)scrap iron, fe-70kg (f)single phase energy meter, 31nos, cu-0.09kg (8)lot no-8, (a)almirah (iron), 01no, fe-20kg (b)drum 210 ltrs., 10nos, fe-80kg (c)desert cooler (gi sheet), 05nos, fe-23kg (d)insect killer, 17nos,fe-52.7kg, cu-0.85kg (9)lot no-9, (a)ht/lt ocb panel, 19nos, fe-3353.50kg, cu-95kg (b) ct/pt, 01no, fe-20kg, cu-0.5kg (c) water cooler with blower motor off size, 13nos, fe-650kg, cu-52kg (d)ups 2kva/3kva, 09nos, nil (e) window a.c, 04nos, fe-80kg, cu-26kg (1-9)location-ph/store/dos

Central Government/Public Sector

CTN :45220479

25 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot miscellaneous scrap - scrap roller-ball bearing with/without cut off size and sort and it's pieces old used and u.s.

State Government

CTN :45275013

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - miscellaneous ferrous scrap consisting of ms pipe, ms platform gutter, gate lock, camera housing, tom cpu cage, gi clamp, nut & bolt, rack handle, earth switch handle, fencing, hydrant box, co2 fire extinguisher, cable tray, nrv, meter box, butter fly valve, pump handle, hand rail,i-clamp, c-levis end, board angle, exhaust bellow, brake shoe, locker, cross arms, super mast, bearing, hose drum, angle, false ceiling, almirah,pad lock, hacksaw frame, metal perforated chair,plu, ferrous parts of pids panel,smps parts, spare cells charger, ms drain cover,horn, isolator lever, opc suspension clamp, n/b of pg, driving screw assemble, rtu panel, fhc door, ball valve, coupling, nozzle, ups battery bank, table, wheel chair, bajaj hot case, autometic hand sanitiser dispenser, cable clamp, hnaging device, screw element, marker board, battery cabinet, osg rope, landing door header, brake unit, main rope 8mm, drawer, q manager, standee, hand & padel sanitiser dispenser, information board, rc, catenary & contact clamp, tirfof, n/b 76 pg, hose drum, 4 way valve,pressure switch, flexible gi condute, blade, anti roll bar, n2,o2, da & r-410 gas cylinder, tool box, angles etc. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 07"

corporations/Associations/Others

CTN :45222653

29 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s 200/210 ltr rusted empty steel drums,u/s ms coal pipes and bend scrap with ceramic lining scrap,u/s cast iron scrap,u/s conveyor roller ms scrap without rubber lining,u/s mixed ms scrap,u/s grinding ring steel scrap,u/s grinding ball scrap,u/s grinding roll scrap,u/s bull ring segment scrap,u/s esp/ gi sheet / ms tin scrap,u/s boiler air heater tube steel (including bend and damage tube) scrap,u/s air heater tube cut piece scrap,u/s boiler water wall panel scrap,u/s economizer tube coil scrap,u/s crusher hammer scrap,u/s ms pipe scrap,u/s bearing scrap,u/s aluminium scrap/ aluminium cap of bulb and tube scrap,u/s chock scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s lighting fitting scrap,u/s cu-ni-90/10 condenser tube scrap,u/s ss condenser tube scrap,u/s carbon brush scrap,u/s uncomplete different size panel scrap (3 nos ),u/s 1600 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s 2500 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s gear box sdn-630 (write off),u/s dc motor 132kw and 125 kw scrap,u/s generator transformer 200mva,u/s lube oil with drum,u/s transformer oil with drum,u/s battery scrap (25kg),u/s plastic scrap (5 kg),u/s e-waste scrap,u/s beml make hydraulic loading machine pc 220fs shovel,u/s beml make bulldozer d-80-12a

CTN :45083164

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxycut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, gear, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any non ferrous.qty-145mt. location-east of vm road in ncb-12.

Central Government/Public Sector

CTN :45054943

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers,gear wheels of sizes ,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, full/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails , ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, bearing adapters,valves of sorts and sizes , brake rigging components, ctrb bearings and its components, connecting rod assemblies, buffer plunger full assemblies , valve springs , buffer spindles, axle box covers, angle cut pieces , main bearing caps, connection straps, cam shaft parts, cut off angle cocks, bss hanger pins, pull rods,damper brackets,center pivot top and bottom parts,cbc couplers,compensating beams,bearing housings/axle box caps, transmission bars, right angle gear covers, cr tanks,traction motor components , vibration dampers, gate valves, isolating valves, ball joint traction lever,tm motor ip cores,cooler headers,roll links,traction centers, liner sleeves,air duct assemblies,brake headers, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Angle Frame Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector