Latest angle rack Tenders | Government angle rack Tenders

Corporations And Associations And Others

CTN :45414096

10 Jun, 2026 1.67 Lacs

Multi City - Haryana

Tender For special repair of ashiana scheme flats 560 d/us (phase-i) in sector-47, gurugram. renewing glass panes, with putty and nails whereever necessary racking out the old putty (float glass panes of nominal thickness 4mm in ashina flats sec-47, gurugram - : .special repair of ashiana scheme flats 560 d/us (phase-i) in sector-47, gurugram. renewing glass panes, with putty and nails whereever necessary racking out the old putty (float glass panes of nominal thickness 4mm in ashina flats sec-47, gurugram a/c rs. 1.68 lakh

Central Government/Public Sector

CTN :45181020

09 Jun, 2026 NA

Singoli - Madhya Pradesh

Tender For corrigendum : supply of godrej racking system type a , godrej racking system type b , godrej racking system type d , godrej racking system type c , installation charges

corporations/Associations/Others

CTN :45196254

12 Jun, 2026 NA

Bacheli - Chhattisgarh

Tender For corrigendum : supply of 1600794164, intelligent remote racking device

Central Government And Public Sector

CTN :45034478

11 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s

CTN :44961942

15 Jun, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

Central Government/Public Sector

CTN :45388210

22 Jun, 2026 NA

Ambala - Haryana

Tender For supply of revolving chair,visitor chair,visitor chair,high back chair,chair for conference room,chair with head rest,almirah,back unit of size,5 seater sofa,slotted angle rack,pedestal

Central Government/Public Sector

CTN :45371767

18 Jun, 2026 NA

Ferozepur - Punjab

Tender For certain b/r repair to plumbing sanitary items pvc doors and other allied works in various md accn in area of age b/r ii of ge (west) ferozepur - demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed., dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed., demolition of brick work built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed., taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., m&l for taking down existing stop valve / bib cock 15 mm bore by replacing head/washer/spindle/cap etc and refixing the same complete all as specified and directed., m&l for taking down existing low level flushing cistern and refixing after replacing the syphon, ball valve with washer and flush handle complete all as directed., demoletion and breaking up drain pipes 110 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, demoletion and breaking up drain pipes 75 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed., m&l for brick work built in cement mortar (1:6) with sub class b old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed., s&f 50mmx47mm size solid pvc door frame made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified shown on drawing and specified and directed., s&f factory made 30mm thick (style) solid panel pvc door shutter consisting of frame made out of ms tubes for top & bottom rails, ms frame covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 b.2.1 of mes schedule part-ii (2004) complete all as specified shown on drawing and specified and directed., s&f ptmt tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed., s&f ptmt butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed., s&f ptmt handle 150mm long fixed with steel screws complete all as specified and directed., m&l for 25mm thick plain cement concrete (1:2:4) type b-0 using 12.5 mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed., m&l for 10 mm thick (square/ rectangular) light shade vitrified tiles coloured, premium quality, joint-free, area of eac

Central Government/Public Sector

CTN :45366634

19 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cutting holes in

Central Government/Public Sector

CTN :45374562

05 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released ms scrap released from lcw and others consisting of corroded material, ms cutting ,wagon plate,electric pole, ms plate,pipes, rod, pipe racks, angle racks, doors, c.i block, c.i pots, tanks, drum, guard & driver seats, signalling items, signale pole, signal unit, boom, ladder, cms doors,wheel stands, tanks, blowers, trolly wheels, doors corroded plates, sheet, drums, pipes , corroded angle , channel, tank, ms fitting, panel board wire rod saria, signaling ms/gi items,blowers, parts of chimney, frames of angles & pipes, junction boxes, parts of machine without motors, released nut bolt rivet, all type of shock observers, all types & size of pipes, ms rakes, panel, small pieces of ms/cs, iron rod, side body and other wagon parts corroded misc.items of all type of ms/cs scrap of sorts and sizes and old used unserviceable., (except wta items,spring, rail). careful cutting allowed for easy loading. fdp 40 days.delivery should start from one end. mode of delivery by actual weight.

Central Government And Public Sector

CTN :45367216

15 Jun, 2026 NA

Madikeri - Karnataka

Tender For supply of bed side open locker full stainless steel , hospital streture , wheel chaire , portable iv stand , portable hospital screen stand , 2 seater waiting chair made from chrome metal dual legs on both size with arms back rest fixed , almera glass door , closet wardrobe storage , pigeon storage , iron rack slotted angle rack , mayo trolly , mesh back computer chaire , switch worksation , instrument trolley , visiter fiber chair , computer table

Angle Rack Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors