Latest angle steel Tenders | Government angle steel Tenders

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

CTN :43223899

27 Dec, 2025 NA

Darjeeling - West Bengal

Tender For supply of pipe 25mm 3 layer , ppr tee 20 mm dia , ppr tee 25 mm dia , ppr elbow 90 degree 20 mm , ppr elbow 45 degree 20 mm , ppr elbow 90 degree 25 mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia , pvc socket 110 mm , pvc elbow 110 mm dia , pvc tee 110 mm , ppr union 20 mm , pvc float valve heavy duty 25mm dia suitable for ppr pipe , ppr male threated socket 20 to 25mm dia , ppr female threated socket 20 to 25mm dia , ppr male threated elbow 20 to 25mm dia , ppr reducer socket 25 x 20mm , m seal , pvc elbow 2 inch , pvc socket 2 inch , pvc pipe 2 inch dia 6 mtr long , pvc floor trap 4 inch dia with grating 2 inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4 inch dia 6 mtr long , pvc grating 4 inch dia , pvc clip for ppr pipe 25mm dia , ppr tank connector 25 mm , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock 15mm external thread pvc waste pipe 32mm dia , ewc vitreous wash down water closet pan pedestal pattern white pan p or s trap and to flusing pipe antisyphonage pipe etc complete with flush pipes , pvc flushing cistern 10 ltrs capacity with pvc connection 600mm long and waste pipe , pre fabricated septic tank of 1000 ltrs capacity septic tank shall be anchored with hold , pre fabricated sokage pit 500 ltr capacity soakge pit shall be anchored with hold fast , pvc p trap 110 x 75mm , pvc elbow 3 inch , pvc socket 3 inch , pvc pipe 3 inch dia 6 mtr long , pvc tee 3 inch , jointing resin solution of 1 kg or capsules of silicone gel with gel gun for leak proof , towel rail cp 600mm long complete with fitting oblique fixture , soap dish stainless steel chromium plated complete with fittings oblique fixture etc , electric storage water heater geyser 15 ltr capacity 1 ppoint 5kw vertical type including fixing arrangement on puf wall , flexible connection pipe 450 mm long for hot and cold water , ppr female threated elbow 20 to 15mm dia , ppr male threated socket 20 to 15mm dia , ppr female threated socket 15 to 20mm dia , invertor 2kva capacity with 02 battery 24v each battery 12v capacity complete with all accessories including connected electrical items and tools , provn of central heating system complete including structure for boiler room and elect fitting and fixtures all as specified in brief specification , electrician tool kit , plumbing tool kit , measuring fibre glass tape 5 mtr long , industrial safety helmet , showel square nose 14 gauge blade size 310 x 245 mm, shaft size 710 mm fitted with strong steel crutched wooden handles , puf rivet machine , rammer earth with handle minimum weight 5 kg without handle , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , manufacture and supply of storage shelter 30 mt barrel type of size 8 point 84m x 8 m x 5 point 13 m height at ridge all as specified in brief technical specifications , pvc sheathead copper cable 2 point 50 sqmm single core with multistrand 1100 volts , pvc conduit pipe 20 mm 10 feet long , pvc elbow 20 mm , pvc tee 20 mm , pvc space bar saddle 20 mm , pvc circular surface boxes with lid angle 02 way 20 mm , pvc circular surface boxes with lid angle 04 way 20 mm , highbay 150 watts energy saving environment 150 watt robust highbay led luminare with high efficacy suitable for ceiling surface oblique suspended , xlpe cable pvc insulated aluminium conductor served with inner sheathing of pvc tape cross sectional area 16 sqmm 3 core , surface plastic box suitable for moduler switches and socket of 8 module , solid plate with base frame suitable for surface plastic box of 8 module , isolator //bid details3 / 11340 amps spn 240 volts , ceiling rose pvc , angle steel footing size oblique length1000mm , bottom track size oblique length 2257 mm , bottom track size oblique length 2200 mm , gable bottom track size oblique length 3125mm , 0 point 8mm arch panel size oblique length 2260 mm , 0 point 8mm arch panel size obliq

CTN :42751384

19 Dec, 2025 NA

Sonitpur - Assam

Tender For bid to ras corrigendum : supply of provision of 05 x high rise tower post d d-- iron angle rod , iron angle , iron pipe , iron mild steel sheet , tin sheet , pcc plain cement concrete , labor installation charges

CTN :43159177

27 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For supply of office shelter c c - orl ds wall panel 4000x1000x50mm , orl ds wall panel 900x1000x50mm , orl ds wall panel 1900x1000x50mm , mild steel bar tmt bar 8mm dia and upto 16mm dia to length , office shelter wall panels , office shelter window , office shelter roof ceiling , fd security fence angle iron picket 65x65x6mm length 2 point 8 mtr , fd security fence ms flat 50x5mm of 1 point 80m ht , fd security fence ms flat 50x5mm jindal 3 mtr , fd security fence angle iron picket 50x50x6mm strut post of height 2 point 35mtr jindal , fd security fence barbed wire , fd security fence chain link fence dia wire 4mm and size of mesh 100x100mm , fd security fence 12mm dia 50mm long bolt with nuts and 2x washers for each set , solar security lights set ) /bid number: gem/2025/b/6972224 * /dated: 12-12-2025 & & / bid document1 / 24

CTN :43180573

25 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of bearing set sleeve std , pipe flexible , amp meter , rod welding copper , plywood for general purpose , alcohol isopropyl technical , steel angle , steel sheet carbon galavinsed , piston ring set , matting rubber

CTN :43173477

23 Dec, 2025 NA

Darjeeling - West Bengal

Tender For supply of cable spl purpose elect veh,wire elect 199 mm,rod welding,steel angles,steel angles,plywood gen purpose,fevicol sr998

Angle Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors