Latest annealed wire Tenders | Government annealed wire Tenders

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

CTN :45557179

07 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of aerial bunch cable , pvc aluminium insulated cable , wpsc weather proof single core cable maintenance wire , led tube lights indoor retrofit type 20 watts , gi bend pipe for street light , ppc mild steel clamp set , ppc mild steel clamp set suitable for rs joint box pole , algorithm based street light automatic controller switch , street light control sensor timer , miniature circuit breaker 32 amps , miniature circuit breaker 63 amps , wall mounted fans 24 inches , ceiling fans , tape in a roll , ceramic insulator , aluminium platform step ladder , portable dewatering pump , ml3 contactors , ml6 contactors , bearings n321 suitable for 25-250hp pump sets , bearings n311 suitable for 25-250hp pump sets , bearings n313 suitable for 25-250hp pump sets , bearings n315 suitable for 25-250hp pump sets , bearings 7311 suitable for 25-250hp pump sets , bearings 7313 suitable for 25-250hp pump sets , bearings 6318 suitable for 25-250hp pump sets , bearings 6313 suitable for 25-250hp pump sets , lghp 2 5 high temperature grease * /bid number : gem/2026/b/7581825 + /dated: 15-06-2026 ' ' / bid document 1 / 27

CTN :45523073

27 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of cleaning equipment - extra heavy duty flexible shaft with double round inner core made from best quality spring steel provided with heavy gauge outer casing manufacturing from hot dip galvanized steel strips having high tensile coil antifriction lining inside the full length of outer casing complete with guards couplings and hand piece having double ball bearing and oil seal. a) 16 mm. x 8 meter. isi/iso standard., b) 16 mm. x 10 meter. isi/iso standard., c) 16 mm. x 12 meter. isi/iso standard., d) 16 mm. x 16 meter. isi/iso standard., e) 19 mm. x 8 meters. isi/iso standard., f) 19 mm. x 10 meters. isi/iso standard., g) 19 mm. x 12 meters. isi/iso standard., h) 19 mm. x 15 meters. isi/iso standard., i) 19 mm. x 20 meters. isi/iso standard., j) 19 mm. x 25 meters. isi/iso standard., spare inner core for above size: 16 mm. dia isi/iso standard., do - size: 19 mm. dia isi/iso standard., t.e. type tool head with 15 cutter (12 straight & 3 leading bevel cutter)made from best selected quality steel e.n.8-31/09 material duly hardened and tempered for longer service for use with flexible shaft having b.s.w. thread. isi/iso standard. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. with 3 cutter. isi/iso standard., spare straight cutter for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare straight cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare beveled cutter for 39 mm.,42 mm. & 47 mm. isi/iso standard., spare beveled cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare long pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinge/rivet pins for above. isi/iso standard., spare washer for above. isi/iso standard., skato skto motor 5 h.p. complete with variable speed pulley to give final r.p.m. 2900 mounted on trolley with suitable starter to work on electric supply, 3 phase, 50 cycle., truck head brush made from best quality hardened & tempered round speed spring steel wire no. 26/28 swg for use with flexible shaft having 1/2 bsw threads. socket size 1 . a) 39 mm. isi/iso standard., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. socket size 1,1/4 , 30 wire gauge. isi/iso standard., end scrapper made from carbon steel of best quality. isi/iso standard. a) 39 mm., b) 42 mm., c) 47 mm., d) 98 mm., double spiral brushes made from best quality genuine hardened and tempered round spring wire no. 28/29 swg. and twisted with 8 swg. m.s. annealed wire from mechanical cleaning of tubes. the brush having overall length of about 5 and is provided with bsw threads. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. isi/iso standard., foundry brush 6 x 2 without handle. isi/iso standard., foundry brush 6 x 2 with handle. isi/iso standard., b.t. type tool head cutter with 3 cutters made from best quality steel material duly hardened and tempered for longer service for use with flexible shaft having bsw threads. isi/iso standard. a) 82.88 mm., b) 82.50 mm. isi/iso standard., c) 76.20 mm. isi/iso standard., d) 70.00 mm. isi/iso standard., e) 63.50 mm. isi/iso standard., f) 52.80 mm. isi/iso standard., g) 48.00 mm. isi/iso standard., h) 50.00 mm. isi/iso standard., turck head brush for tube socket size 1,1/4 . isi/iso standard. a) 82.5 mm., b) 76.5 mm. isi/iso standard., c) 70.0 mm. isi/iso standard., d) 63.5 mm. isi/iso standard., spare straight cutter for b.t. type cutter. isi/iso standard., spare bevel cutter for above. isi/iso standard., spare pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinges pins for above. isi/iso standard., hand piece with double ball bearing suitable for. isi/iso standard. a) 16 mm., b) 19 mm. isi/iso standard., complete nipple for connecting motor with shaft.(inner core nipple). isi/iso standard., motor end coupling for 16 mm. & 19 mm. inner core. isi/iso standard., complete nipple for connecting

State Government

CTN :45526705

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(all scheme) under new jam.-rural sub division under city-2 division, jamnagar.

State Government

CTN :45526708

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(all scheme) under gokulnagar sub division under city-2 division, jamnagar.

State Government

CTN :45526709

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(all scheme) under new jam.-rural sub division under city-2 division, jamnagar.

State Government

CTN :45526710

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(all scheme) under sikka sub division under city-2 division, jamnagar.

State Government

CTN :45526711

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(hvds scheme) under sikka sub division under city-2 division, jamnagar.

State Government

CTN :45526712

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(spa scheme) under sikkasub division under city-2 division, jamnagar

Central Government/Public Sector

CTN :45436394

29 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of 1100v grade l.t. aerial bunched cable of size 3x120+1x95+1x16 sq.mm (phase wires bare messenger-cum-neutral wire+st.light wire), aluminium phase/street light conductor with xlpeinsulation conforming to is:8130/1984, aluminium alloy bare messenger conforming to is:398(part-iv)/1979, aerial bunch cable governing specification to is-14255/1995 with up to date amendments, if any. other technical specification should be as per annexure-a [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Annealed Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector