Annealed Wire Tenders

Get complete information related to latest Annealed Wire Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Annealed Wire Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Annealed Wire Tenders .

Filter

Loading....

Get Tender in Email

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

CTN :45523073

27 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of cleaning equipment - extra heavy duty flexible shaft with double round inner core made from best quality spring steel provided with heavy gauge outer casing manufacturing from hot dip galvanized steel strips having high tensile coil antifriction lining inside the full length of outer casing complete with guards couplings and hand piece having double ball bearing and oil seal. a) 16 mm. x 8 meter. isi/iso standard., b) 16 mm. x 10 meter. isi/iso standard., c) 16 mm. x 12 meter. isi/iso standard., d) 16 mm. x 16 meter. isi/iso standard., e) 19 mm. x 8 meters. isi/iso standard., f) 19 mm. x 10 meters. isi/iso standard., g) 19 mm. x 12 meters. isi/iso standard., h) 19 mm. x 15 meters. isi/iso standard., i) 19 mm. x 20 meters. isi/iso standard., j) 19 mm. x 25 meters. isi/iso standard., spare inner core for above size: 16 mm. dia isi/iso standard., do - size: 19 mm. dia isi/iso standard., t.e. type tool head with 15 cutter (12 straight & 3 leading bevel cutter)made from best selected quality steel e.n.8-31/09 material duly hardened and tempered for longer service for use with flexible shaft having b.s.w. thread. isi/iso standard. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. with 3 cutter. isi/iso standard., spare straight cutter for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare straight cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare beveled cutter for 39 mm.,42 mm. & 47 mm. isi/iso standard., spare beveled cutter wheel for 39 mm., 42 mm. & 47 mm. isi/iso standard., spare long pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinge/rivet pins for above. isi/iso standard., spare washer for above. isi/iso standard., skato skto motor 5 h.p. complete with variable speed pulley to give final r.p.m. 2900 mounted on trolley with suitable starter to work on electric supply, 3 phase, 50 cycle., truck head brush made from best quality hardened & tempered round speed spring steel wire no. 26/28 swg for use with flexible shaft having 1/2 bsw threads. socket size 1 . a) 39 mm. isi/iso standard., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. socket size 1,1/4 , 30 wire gauge. isi/iso standard., end scrapper made from carbon steel of best quality. isi/iso standard. a) 39 mm., b) 42 mm., c) 47 mm., d) 98 mm., double spiral brushes made from best quality genuine hardened and tempered round spring wire no. 28/29 swg. and twisted with 8 swg. m.s. annealed wire from mechanical cleaning of tubes. the brush having overall length of about 5 and is provided with bsw threads. a) 39 mm., b) 42 mm. isi/iso standard., c) 47 mm. isi/iso standard., d) 98 mm. isi/iso standard., foundry brush 6 x 2 without handle. isi/iso standard., foundry brush 6 x 2 with handle. isi/iso standard., b.t. type tool head cutter with 3 cutters made from best quality steel material duly hardened and tempered for longer service for use with flexible shaft having bsw threads. isi/iso standard. a) 82.88 mm., b) 82.50 mm. isi/iso standard., c) 76.20 mm. isi/iso standard., d) 70.00 mm. isi/iso standard., e) 63.50 mm. isi/iso standard., f) 52.80 mm. isi/iso standard., g) 48.00 mm. isi/iso standard., h) 50.00 mm. isi/iso standard., turck head brush for tube socket size 1,1/4 . isi/iso standard. a) 82.5 mm., b) 76.5 mm. isi/iso standard., c) 70.0 mm. isi/iso standard., d) 63.5 mm. isi/iso standard., spare straight cutter for b.t. type cutter. isi/iso standard., spare bevel cutter for above. isi/iso standard., spare pins for above. isi/iso standard., spare spring for above 6 long. isi/iso standard., spare hinges pins for above. isi/iso standard., hand piece with double ball bearing suitable for. isi/iso standard. a) 16 mm., b) 19 mm. isi/iso standard., complete nipple for connecting motor with shaft.(inner core nipple). isi/iso standard., motor end coupling for 16 mm. & 19 mm. inner core. isi/iso standard., complete nipple for connecting

State Government

CTN :45434640

11 Jun, 2026 NA

Palamau - Jharkhand

Tender For e- quotation for scheduled item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150-200mm size for hand broken at quarry, boulder with minimum size of 300mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubber stone, sand bags (cost of sand and empty bag), square rubber coursed stone, stone bricks of size (i) 250 mm x 125 mm x 100 mm(ii) 250 mm x 125 mm x 125 mm, (i) g. i wire (8 to 10 swg) (ii) black annealed (8 to 10 swg), binding wire (i) annealed wire (20 to 25 gauge) (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s 1838-1938) filter (i) 25 mm thick, 150 mm dia. r.c.c np2 perforated pipe, pressure release valve, (i) safety valve (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4 ) external dia 38 mm (11/2 ) (i) 100 mm long (ii) 225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia 375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 ctc (imp), nx core bit 38 ctc (imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts (imp), bx st reamer cell 6.5 cts (imp), good quality wooden core box 3 metre long x 0.85 metre wide x 0.15 meter deed with longitudinal compartment to accomodate 5 rows of 3 metre long cores i.e lotal 15 metre .

CTN :44818484

05 Jun, 2026 NA

Sangrur - Punjab

Tender For corrigendum : providing e.c. bags, m.s. annealed wire, jumbo bags, nylon rope, dewatering etc. weaving of wire netting, hiring charges of jcb machine, poclain machines etc. which will be used during the flood season of 2026 for strengthening the embankments and p

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

Loading, Please wait...

Annealed Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector