Latest anodizing Tenders | Government anodizing Tenders

Central Government/Public Sector

CTN :41368485

10 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For lws shell complete (a) one coach set of roof, 2 mm sidewall and end wall 1) roof assembly to drg no 58116032, alt 'l'- 1 no. welding pin to be assembled as per drg no 58110037, alt 'nil' (with latest sub drawing49516008, alt "a") 2) end roof assembly to drg no 58116066, alt "g"- 2 nos. 3) sidewall to drg no 75214023,alt "nil"- 1 no. 3mm thick to rdso spec. c k-201 x2crni12 sheet to be used for manufacturing sidewall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt "h"- 2 nos. (b) partition frames & body shell items and floor supports 1) 75210012, alt "nil"- 1 no. 2) 75210002, alt "nil"- 1 no. 3) 58210036, alt "a"- 2 nos. 4) 75210003, alt"nil"- 1 no. 5) 67010011, alt "a"- 2 nos. 6) aaa10488, alt "c"- 6 nos. 7) 58110017, alt "b"- 2 nos. 8) 58110015, alt "a"- 6 nos. 9) 58110016, alt "a"- 3 nos. 10)aab10338, alt "nil"- 16 nos. (c) under frame complete to drg.no.67011001, alt 'n'- 1 no. the firm shall fulfill the manufacturing requirement of icf/md/spec-451, issue status-01, rev-01. assembly of (a), (b) and (c) shall be done as per drg no. 75210001, alt 'b' (d) installationitems 1) body side entrance door installation as per drg no. -58152001, alt "b" -1 no. 2) foot step complete to drg no. 58124004 alt "nil"-6 nos. 3) exterior garniture to drg no. 59326001 col-i alt "h" -1no. 4) application of epoxy coating. 46590003 col-1 alt "d" -1 no. 5) roof ventilator assly -01873401 col-i alt"r" - 7 nos. 6) coupler mounting -46021001 col-i alt "e" (aar h coupler to pl no. 33549771 -2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75290002, alt 'id' to be followed. special condition : suitable packing should be done to prevent damage during transit and unloading. installation required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. supply rates and installation rates to be quoted separately. [safety item ]

Central Government/Public Sector

CTN :41368486

10 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For lwscn shell complete (a) one coach set of roof, 2 mm side wall and end wall for lscn coaches 1) roof assembly to drg no 58216001, alt 'n'- 1 no. welding pin to be assembled as per drg no 58210045 alt 'nil' (with latest sub drawing 49516008, alt 'a') 2) end roof assembly to drg no 58116066, alt 'g'- 2 nos. 3) location of sidewall to drg no 75314013, alt 'nil'- 1 no, 3mm thick to rdso spec-ck201 x2crni12 sheet to be used for manufacturing side wall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt 'h'- 2 nos. (b) body shell items.1) 58210036, alt 'a' - 2 nos. 2) 75310003, alt nil - 1 no. 3) 67010011, alt 'a' - 2 nos. 4) aaa10488, alt 'c' - 4 nos. 5) 58110017, alt 'b' - 2 nos. 6) 58110015, alt 'a' - 3 nos. 7) 58110016, alt 'a' - 6 nos. 8) aab10338, alt nil- 16 nos. (c) under frame complete to drg no 73911001 alt 'j' - 1 no. assembly of (a), (b) and (c) shall be done as per drg no.75310001 alt 'b' (d) installation items 1) body side entrance door installation as per drg no.58252001 alt 'a' -1 no. 2) foot step complete to drg no. 58124004 alt nil - 4 nos. 3) exterior garniture to drg no. 59326001 col-i alt 'h' -1 nos. 4) application of epoxy coating. 46590003 col-1 alt 'd' -1 nos. 5) roof ventilator assly -01873401 col-i alt 'r' - 7 nos. 6) coupler mounting -46021001, col-i alt 'e'(aar h coupler to pl no. 33549771 - 2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75390002 alt 'ic' may be followed. the firm shall fulfill the requiremnt as per as per icf/md/spec-451, issue status-01 rev.00. special condition : - suitable packing should be done to prevent damage during transit and unloading. - installation required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. - supply rates and installation rates to be quoted separately. [safety item ]

CTN :41150052

02 Sep, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For bid to ras supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3) , thinner for epoxy paints (bhel) (q3)

Central Government/Public Sector

CTN :41486012

05 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of epoxy , supply of micro concrete , supply of acrylic polymer latex 45 , surface preparation, protective coating with acrylic polymer, reflooring with micro concrete , cleaning surface for dust & dirt removal of undulation by self levelling epoxy flooring

Central Government/Public Sector

CTN :41633105

18 Sep, 2025 40.00 Lacs

Kangra - Himachal Pradesh

Tender For provn of storage room for company stores, addn/altn to building no t-59 of def and emp coy, provn of underground elect connection and epoxy coating, 30 x monkey cages in mh area, window grills, wall paneling/ceiling under at mil stn yol

State Government

CTN :41524829

01 Sep, 2025 NA

Trichy - Tamil Nadu

Tender For corrigendum : supply and application of solvent free epoxy protective coating inside the hydraulic oil collection pits (rcc) at tm#5 at tnpl unit ii

CTN :41620688

12 Sep, 2025 NA

Mumbai - Maharashtra

Tender For providing three layer epoxy based anticorrosive coating to 2345mm dia. mumbai-ii and 3000 mm dia. mumbai iii transmission mains from yewai to majiwade in transmission main section and to 3000 mm dia. upper vaitarna main from 'y' branch to aghai phase-i and 3000 mm dia. vaitarna main from y branch to o/4 anchor block section in tansa section in o.c. division.tender no. 2025_mcgm_1213239_1

State Government

CTN :41576976

04 Sep, 2025 2.73 Crore

Chennai - Tamil Nadu

Tender For replacement of weak motors repair of spreader beam replacement of wire rope for gantry crane bottom side seal arrangement of stoplog gates repair renewal of stoney type roller frame surface coating with prime coal tar epoxy on stoplog gat

CTN :41488066

29 Aug, 2025 32.52 Lacs

Bhubaneswar - Odisha

Tender For procurement of furniture for sihm bolangir - supplying fitting and fixing of full back executive chairs are of size 76.3 (w) x 76.3 (d) x 99.5 - 110.5 (h) x 43.3 -54.3 (sh) cm . the seat assembly is made up of 1.2 +0.1cm. thick hot-pressed plywood measured as per qa method described in ocp-qlta-p14-18, upholstered with fabric upholstery covers and moulded polyurethane foam of size 47.0 cm. (w) x 48.0 cm. (d) .the back asembly is made of powder coated (dft 40-60 microns) tubular frame of b 2.54 +0.03cm. x 0.2 +0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back is upholstered using net fabric with high tenacity yarn of size 46.5 cm. (w) x 60.5cm. (h) . the hr polyurethane foam is moulded with density =45+/-2 kg/m and hardness load 16 + 2 kgf as per is:7888 for 25% compression.the one-piece armrests are injection moulded from black co-polymer polypropylene.the mechanism is designed with the following features: 360 revolving type. 17 t2 maximum tilt on pivot at centre upright position locking. tilt tension adjustment.the powder coated (dft 40-60 microns) tubular frame is cantilever type & made of b 2.54 +0.03cm. x 0.2 +0.016cm.thk. m.s. er.w. tube. the pneumatic height adjustment has an adjustment stroke of 11.0 +0.3cm.the bellow is 3 piece telescopic type and injection moulded in black polypropylene.the pedestal is injection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. the pedestal is 6c.3 +0.5cm. pitch-center dia. (76.3 +1.0cm with castors.). make : godrej/durian/geeken/ or equivalent as directed by e.i.charge, supplying fitting and fixing of executive tables are of size 120 (l) x 60 (w) x 75 (h) cm with hing door storage width 35.0 cm outer to outer . work surface,modesty panel,under structure & hinge door storage should be made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirrming to is-12823; 1990,edge banded with matching 2 mm thick pvc lipping.gromet provided on work surface for wire management.handle & cam lock should be provided on hinge door of storage. make: godrej/durian/geeken/ or equivalent as directed by e.i.charge, supplying fitting and fixing of educational study / training units are of size 124 (l) x 113 (w) x 75.72 (h) cm ,desk-top panel,modesty panel & back panel should be made from 18mm thk pre-laminated twin board (e1/p2 grade) with pvc edge banding on all sides.the panels have corners rounded for safety usage. all side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 swg) round erw tubes ,31.8 x 1.2 mm thk(approx. 18 swg) round erw tubes and 28.6 x 1.2 mm thk(approx. 18 swg) round erw tubes(as per is:7138) which are welded together.the welded structures and cross connectors afe coated with min. 45 micron thickness of epoxy polyester coating.back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 swg) rectangular erw tubes(as per is:7138).the tubes are coated with min. 45 micron thickness of epoxy polyester coating.the storage shelves are made from 0.6 mm thk ms sheet(as per is:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating.hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. they are made from 2 mm thk ms sheet(as per is:513) and are coated with min. 45 micron thickness of epoxy polyester coating.the understructure is assembled using m6 trilobular screws(as per din 7500) with zn blue plating(as per is 1573:1986).godrej/durian/geeken/ or equivalent as directed by e.i.chargecompact laminate seat and back panels are assembled using m6 countersunk trilobular screws(as per din 7500) with zn black plating(as per is 1573:1986).spacers are provided on the top of round tubes for wooden panels fixing.they are made of pp glass filled(30%).plastic caps made of pp copolymer(3530 grade) are also provided on t

Central Government/Public Sector

CTN :41604906

10 Sep, 2025 NA

Kapurthala - Punjab

Tender For supply and fitment of epoxy flooring(two-part solvent free epoxy resin coating) confirming to rcf specification mdts 44289(specification may be obtained from rcf, kapurthala) or rdso c9704 & astm c-579-01, confirm to fire properties of en 45545-ii in lavatories of lhb coaches

Anodizing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector