Latest anthropometer Tenders | Government anthropometer Tenders

CTN :41273460

16 Aug, 2025 NA

Gopalganj - Bihar

Tender For supply of models and charts , drawing equipments and instruments , models for projection and demonstration , combined shear force and bending moment apparatus , heat pump , separating and throttling calorimeter , indicator unit , green sand moulding up, casting up and patterns , hot forging equipment , punching blanking press , screw pitch gauge , working models of surface condenser , refrigerant leak detector , air conditioning test rig , air conditioning unit , sling psychrometer , natural convection apparatus or test rig , forced convection apparatus or test rig , thermal conductivity apparatus , stefan boltzmann up , thermal conductivity apparatus for composite wall , advanced casting equipments and tools , 3d printer , bicycle free wheel sprocket mechanism, geneva mechanism, ackermans steering gear mechanism and foot operated air pump mechanism , different types of cams, follower sand cam follower arrangements , various belt drives, chain and sprocket , various types of brake assemblies , vehicle tyre balancing machine , proximity sensor kit , temperature transducer kit , pressure transducer kit , flow sensor kit , thermistor , thermocouple , stepper motor control trainer , hydraulic motor trainer , cut sections of pumps, actuators, valves and accessories used in hydraulic systems , working models of pumps, actuators, valves and accessories used in hydraulic systems , oil hydraulic trainer , advanced electro hydraulic and electro pneumatic hardware systems , out put devices , thermal actuators , magnetic actuators , open and closed loop control system kit , pid controller test bench , cro 150mhz and 100mhz and 70mhz and 50mhz , rs485 i o module , ethernet i o module , pneumatic trainer , hydraulic trainer , thermal conductivity apparatus, metal bar, electric heater, thermocouple , experimental set up for thermal conductivity of liquid , experimental set up for thermal conductivity of insulating material , composite wall apparatus , critical radius of insulating materials apparatus. , experimental up to for testing effectiveness of metallic fin pin fin apparatus , a metallic tube of diameter d 45mm and length l 450mm with a electrical heater coil along the axis of the tube , stefan boltzmanns apparatus , emissivity apparatus , critical heat flux up , batteries and fuel cells , hydrometer , capillary tube , red wood viscometer , beaker , pipette , electronic balance //bid details 2 / 50

CTN :40050707

07 Aug, 2025 6.56 Lacs

Unnao - Uttar Pradesh

Tender For corrigendum : supply of different materials used for testing at electricity test division, unnao under electricity distribution circle, unnao. - o/c & earth fault relay (ashida adr 241 b), clamp meter (0-20a), combination pilier (taparia), rachet set (taparia), grinder bosch (240 volt, ac operated), drill machine (240 volt, ac operated), spanner set (taparia), pcv tape (red, yellow & blue) colour, pin type & u type copper lug 2.5 mm2 (100 each), dc indication led (24 volt to 36 volt) suitable for 11kv & 33kv control pannel, flexible copper wire havells (red, yellow & blue, black color) 2.5mm2, tripping coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider), oti(oil temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c), wti (winding temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c) with gradient adjustment through a shunt for ct secondary input (1amp to 5amp), closing coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider)

CTN :39481967

01 Sep, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

CTN :41231750

12 Aug, 2025 15.99 Lacs

Delhi - Delhi

Tender For supply of anthropometric instruments - anthropometer , sliding caliper , spreading caliper , skinfold caliper , laser measuring tape digital , circumference measuring tape , goniometer , pinch strength dynamometer digital , verificator anthropometry,caliper checking gauge

State Government

CTN :41223987

25 Jul, 2025 20.00 Lacs

Multi City - Bihar

Tender For equipments for electrical engineering lab.--, , rlc kit, , water analyzer, , solar energy panel - kt, , four point dc motor starter, , single phase transformer, 230/230v, 230/115v, 3kva with tapping at 10%,25%,50% and 75% housed in steel box with educational type terminals provided with control panel (for oc and sc test) consisting of following accessories, , dc compound motor, , single phase, , electrodynamometer wattmeter, , digital portable lcr meter, , single phase variac, , three phase variac, , phase sequence indicator, , synchroscope, , rheostats of various ranges, , meggar (two of each rating), , different types of overhead line insulators(each one), , different types of underground cables, , parallel inverter using scr's (memurray bedford), , step up chopper trainer kits with required capacity of (30v/2a and 220v/5a ratings), , battery charger experimental kit using scr, , experimental kit for speed control of dc series motor (scr based), , synchronous motor, , dc servo motor speed torque characteristics kit, , ac servo motor speed torque characteristics kit, , ac position control system kit, , dc position trainer kit, , synchro transmitter and receiver kit, , linear system simulator (open loop & close loop system of first order & second order systems), , cut sections and charts, , hrc fuse, , d.o.l.. starter (for induction motor) trainer kit with overcurrent relay, , three phase power factor meters, , insulation tester, , single phase wattmeter, , clamp ammeter kit, , dso, , sr, d, jk and t flip-flop (each two), , common emitter transistor set, , analog to digital converter interface card, , 4 digit seven segment display interface card, , dac kit, , temperature measurement & controller card, , 8086 microprocessor trainer kit for study, , intel 8051 microcontroller kit with data card, , nd converters experimental kit (adc 0800 series), , led display kit with card, , lcd display kit with card, , monkey wrench/pipe, , wrench, , chisel (farmer chisel & cold chisel), , wire stripper, , hand drill, , drill bits-metal bit reamer, carpentry bits, flat wood bit and masonry bit., , tumbler switch, , dpic switch, , main switch, , sub mail 1 switch, , 2 way 6a switch, , 1 way 6a switch, , single pole double throw, , single pole single throw, , triple pole switch, , metal conduit pipe with junction box, , metal bend, , pvc casing and capping, , pvc bend, , batten lamp holder, , switch boards with socket outlets, , 7/20 swg power wire, , 3/20 swg phase wire, , 3/22 swg neutral wire, , 1/18 swg earthing wire, , flexible cable, , try square, , coil winding machine, , card dynamo for the purpose of armature winding, , 3- phase squirrel cage 2hp induction motor for the armature winding purpose, , small battery charger for assembly and testing purpose, , alarm bell for assembly and testing purpose, , inducting relays for assembly and testing purpose, , coil winding varnish coated wire of suitable gauge

CTN :41203469

25 Aug, 2025 1.50 Crore

West Tripura - Tripura

Tender For supply of different machineries - supply of different machineries., automatic knife sharpening paper cutting blade grinding machine machine size: --grinding length 1600 to 1800mm, grinding width 150/160mm.width of the machine table 200 plus mm, grinding motor 4to6kw, cast iron/welded modular construction, smooth/ss inner area to drain out the cooling water drainage, hardened and ground steel bands for main & side guides, easily exchangeable, cast iron table with t slots & clamps, cast iron swiveling table for bevel grinding in one setting swiveling 360 degrees. additional clamping sides with t slots & clamps, *grinding heads should be smooth to move on carriage ways of the bed, branded grinding motor should be used like siemens/abb/kirloskar etc.,mounted with electro coolant pump, accessories required.:a) herded grounded strip. one set., b) grinding stone., c) honing stones.d). stone desser.,e). spl. tools in any, 43 fully automatic heavy duty hydraulic paper cutting machine-- front table length 680 mm.,front table height 900 mm., minimum (hydraulic) clamp pressure 400 kg.,max. (hydraulic) clamp pressure 4000 kg., smallest cut without false clamp 25 mm., smallest cut with false clamp 25 mm., cutting width 1070 mm., clamp opening 130 mm., weight of the machine 2800 kg or above., back gauge speed (normal) 50 mm. per second., back gauge speed (exp) 200 mm. per second or above., operative power supply 350-500v3 phase., max power within 4.5 kw.,machine height within 1700 mm., operative temperature 10 to 55 degree., hydraulic valve and clutch, operative brake system., multi-layer photo electric safety., double stroke prevention/two hand cutting cycle switch., mechanical overload prevention., air table with 8.8 coating.,the machine should be supply with future provision to incorporate programming system od bear minimum expenses., back gauge positional accuracy 0.03 mm., servo motor driver back gauge mechanism., bhartiya cutter hammer makes control gear., perfect binder machine ----4four) clamp, production speed 2500 per hour., book block size, book width 100 to 270 mm., book length 150mm to 440 mm., book thickness 3 mm. to 50 mm., dimension and weight , length x width x height 3200 mm x 1400 mm x 1220 mm, weight - 2700 kg approx., power supply 415 v, 50 hz 3 phase., damper roller washing machine----machine size: 30 width, 70 length,36 height, machine operation:, forward/reverse switch, max roller replacement: 4(four), max roller size :60 , roller wash tray: stainless steel with m.s fabrication, p.s plate processor- dimension (l x w x h)-1170 x 1260 x 860 mm, plate size- 700 x 970mm, developer tank capacity-40 liters., electric voltage-220 volt., speed-300-600mm / min. automatic double side flip top palte exposure-exposing area -960 x 1200 mm, power supply -220 v single phase, exposure uniformity-85-95%, light source should be from bottom of the exposure machine, metal halide lamp with 3kw capacity with instant start, arrangement for exposing from both sides.

State Government

CTN :41192284

06 Aug, 2025 2.46 Lacs

Jabalpur - Madhya Pradesh

Tender For the procurement of spare parts of becn01 rig machine which is work in office of the assistant engineer phed mechanical sub division jabalpur - for the procurement of the following spare parts of becn-01 rig machine, coupling for elgi compressor element drv coup-l2613 (elgi), hydraulic pump (45-5) gpm (veljan), hydraulic pump (38-12) gpm (veljan), separator element two stage (elgi), 1 "double wire braded air hose pipe r2 (hydraulic,high temperature)parker, wire rope steel core 19 mm usha nartin/mahadev, mast and rig hydraulic jack oil seal kit & packing, control lever box hydraulic meter

State Government

CTN :40985783

11 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports exercise physiology lap equipments - cardiopulmonary exercise testing system system should be compact can be used in laboratory operation and low maintenance costs and easy servicing. system should be state of the art computerized telemetry breath test analyzer for on-line breath by breath measurement of exercise test of respiratory system to measure following parameter: time, ve, bf(rr), hr, feo2, feco2, peo2, peco2, vo2, vco2, ve/vco2(eqco2), ve/vo2(eqo2), rq(rer), vd/vt, vo2/kg, vo2/kg/hr, met, watt(work), hr, ttot, ti, te, ti/te, ti/ttot, pef, pif, br, vet, sum, tv/te, o2 kinetics, oxygen deficit, oxygen debt parameters and indirect calorimetric. wireless hr recording system, indirect cardiac output by wassermann algorithm system should comply ats and ers guide line and it should be ce certified., iso certified system should have automatic ambient conditions measuring system. system should work under temperature range 0 to 50 celsius. system should have facility for automatic calibration of analyzers. volume transducer calibration with precision calibration syringe. system should meet following technical specification flow rate measurement: measuring headpiece should be either through turbine /dvt/ pneumotach and dead space less then 40 ml, it should not be affected by humidity , flow range +/- 18 l/s and accuracy 2% oxygen analyser : should be either electrochemicalcell/paramagnetic and measurement range 0- 100 %,response time t90 100 ms and accuracy +/-0,04 % and- resolution 0,02 %carbon dioxide analyser : should be ndir (infraredabsorption) and measurement range 0 - 10 %,-response time t90 90 ms , accuracy +/- 0,04 %, andresolution 0,02 % software should support latest windows or latest andin corporate customized predicted normal equations.software should be capable of changing graphics displays during real time testing. system should have facility for automatic treadmill or bicycle ergo meter control. should be supplied with software, standard accessories for operation manual carrying case for field use. system should be supplied with latest data acquisition system, deskjet printer and ups. system should comply en iso 13485:2003, en iso 9001:2000, ec certificate93/42/eec, programmable treadmill running machine with user terminal (display &keyboard) stand- alone and remote control via rs232 running surface: l:170 cm (minimum), w: 65 cm (minimum) maximum possible load: 200 kg (440 lbs) speed range: 0-40 km/h elevation: 25% (14 maximum elevation) motorized adjustment, reverse belt rotation. motor system 3.3 kw, single phase ac motor, maintenance free and brushless power transmission: frequency inverter, poly v- belt, very quiet operation safety system: emergency-off safety stop switch (safety lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains ambient condition: temperature: +10to +40 degrees c, humidity 30 to 70% display (resolution): lcd display heartrate monitoring: wireless transmitter; the treadmill should be able to interface with well-known compatible metabolic gas analyzer as per standard and custom exercise protocols different programs safety harness-1. indispensable accessory for stress testing, accident prevention and for the general safety of athletes.2. safety arch with different heights and widths to fit all running machines.3. an emergency stop at the crossbar of the safety arch allows automatic stop of the running belt in the moment a fall occurs.4. the harness and chest belt (available in 5 sizes: xxs, s, m, l, xl) secure the subject and prevents falling over to the front.5. chest belt straps do not pinch or restrict the athlete", programmable ergometer functional design and excellent stability, load up to 160kg. easy to use saddle, handle bar and pedals speed independent and dependent power control handle bars are easy to change to suit different tests, rotatable by 360 degrees. mechanical/motor-a

State Government

CTN :40985784

11 Aug, 2025 2.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of recovery and rejuvenation lab. - infrared sauna tower irradiance: 55-110 mw/cm2, providing therapeutic benefits rated power: 100-240v ac, 2 amp, 50-60hz, suitable for standard electrical outlets wattage: 350w, combining red light and near-infrared therapy wavelength: 650nm (red light) and 850nm (near-infrared), promoting healing and relaxation led arrays: 70 red light leds (650nm) and 70 near-infrared leds (850nm), ensuring optimal coverage variable optics: 7 60-degree optics for maximum impact and quicker results. emf emissions: no detectable emf emissions at 10-15cm, prioritizing user safety. infrared sauna units with below mentioned features to be preferred- heaters: full spectrum heaters (400w each) or carbon fiber heaters (up to 2160w total power) temperature control: digital temperature and time control for customizable sessions materials: canadian hemlock wood or western red cedar, known for durability and hypoallergenic properties additional features: bluetooth connectivity, chromotherapy lights, and built-in stereo speakers for an enhanced experience. energy efficiency: reduced electricity consumption for cost-effective use temperature range: operating temperatures between 115 f and 140 f for comfortable sessions safety features: person-specific designs and low emf emissions for safe use, cryotherapy chamberwhole body cryo therapy chamber that runs completely on electricity without need of liquidnitrogen low temperatures within the range: -130 to -140 degree celsius. multiple treatment options electric mechanical lift system ensures user s head is outside the chamber to prevent exposure to cryogenic temperatures. real-time skin temperature monitoring using ir tech sensors ensuring safe and controlledcooling. smart software that manages the treatment processes throughout each session. simple quick plug-and-play set up without requiring specialized ventilation. large uhd touchscreen for easy operation and control. at least 3 media monitors for displaying media content. hifi speakers for audio entertainment and ambient audio. work on normal indian 220v at 16a or less, whole-body pneumatic lymphatic drainage machine:key features- multi-chamber design: multiple chambers that inflate and deflate in sequence to mimic manual lymphatic drainage- adjustable pressure: adjustable pressure settings to accommodate different patient needs and comfort levels- programmable treatment: programmable treatment protocols for customized therapy sessions- user-friendly interface: intuitive interface for easy operation and programming- input voltage: ac110v/220v- power consumption: less than 400w- screen: 8-inch wide color touch screen- air pressure: 20-360 mmhg (max pressure 37.5kpa)- cooling device output temperature: 5 to -16 c- output vacuum pressure: 0-110kpa- default time: 0-60 minutes- fuse size: f3al250v- ambient temperature: 5 c to 42 c- number of air bags: 24 bags or 16 pairs atleast - treatment modes: 4 modes atleast - intensity levels: 3 levels- package size: 62x42x31cm approx - gross weight: 15 kg approxsafety features- automatic pressure adjustment: automatic pressure adjustment to prevent excessive pressure and ensure patient comfort- emergency stop: emergency stop feature to quickly deflate chambers in case of discomfort or distress- patient monitoring: optional patient monitoring capabilities to track vital signs and treatment responseadditional features- multiple treatment modes: multiple treatment modes for different conditions, such as lymphedema, edema, and post-surgical swelling- data logging: optional data logging capabilities to track treatment parameters and patient progress- portability: optional portable design for increased flexibility and convenience.certifications: ce or fda clearance, percussion massager (gun massager)key features- percussive action: a percussive action that provides rapid and repetitive strokes to muscles and tissues- adjustable speed: adjustable speed settings to cust

State Government

CTN :40985787

11 Aug, 2025 63.00 Lacs

Mohali - Punjab

Tender For corrigendum : purchase of biochemistry lab equipments - fully automatic biochemistry analyzerthroughput: 200 photometric tests/hour & 400 tests/hour with ise (optional)reagent positions: 50 cooled reagent positionssample type: whole blood, serum, plasma, urine, csf otherreading volume: 180 lsample volume: 2-70 l (adjustable in 0.1 l)reagent volume: 10-300 l (adjustable in 1 l)light source: halogen lampon board laundry: 6 stage cleaning, 2 stage drying with cuvette validation stepcalibration type: linear, non-linear, multipointprogrammable parameters: default system pack parameters + upto 10 user defined parametersdimensions and weight: ergonomic design and light weight., fully automatic hematology analyzerthroughput-up to 80 samples per hourdimensions and weight ergonomic design and light weighttest mode-cbc, cbc+diffdata storage capacity-up to 100 000 resultscommunication-lan port supports hl7 protocolpower requirement-a.c. 100-240 v, less than or equal to 300 va, 50/60 hzoperating temperature-15 to 30 degree celsiusoperating humidity-30-85%air pressure70-106 kpa, fully automatic immunoassay analyser random assay (hormone analyser)instrument name: immunoassay analyserusage/application-clinicalplate format-random assaydetection method-luminescenceparameters-blood alcohol contentautomation-fully automaticuser input-touchassays-diabetes, thyroid, cardiac, vit d, fully automatic electrolyte analyser-analysis time: 60 second per sample parameters- na , k , cl or ca2+no. of parameters 3 simultaneously90 luser inputs 5 colored touch screen displayelectrode type- sturdy electrode (facility to refill the solution)connectivity 2 usb port, rs232, lisdata storage- 10,000 patient results & 10,000 qc results for 3 levelssample identification- alphanumeric sample idqc management- tri-level quality control, l j plots of last 30 dayscalibration- 2 point calibration on every 4 hours1 point with every samplepower - 100 240 v, 50/60 hz (self adjusting)printer - inbuilt thermal printerroom temperature -15 30 c / 60 90 fhumidity- 85%dimensions and weight - ergonomic design and light weight, centrifuge machine along with 500 prp test tubes (double spin)parameter- neya-16 max speed (rpm)- 15000max rcf (g)- 21000max capacity (ml)- 4 x 175acceleration profiles- 10deceleration profiles- 10display-- multi-color lcdno of programmes- 10 (protected)timer- 30 sec to 99 min & continuous modeergonomic design and light weightsupply - 220v, 50 hz, 1 phasecan be used for extracting prp, autoclavekey features- high-pressure vessel: a high-pressure vessel designed to withstand high temperatures and pressures- temperature control: precise temperature control to ensure effective sterilization- timer and controls: easy-to-use timer and controls for convenient operation- safety features: multiple safety features, such as automatic shut-off and overheat protection, to prevent accidents and ensure safe operationconstruction and materials- stainless steel: a durable stainless steel construction to withstand high temperatures and pressures- insulation: high-quality insulation to ensure efficient heat retention and energy savings- door and seals: a secure door and seal system to prevent steam escape and ensure effective sterilizationperformance specifications- temperature range: 121 c to 134 c.- pressure range: upto 30 psi- cycle time: 15-60 minutes- sterilization capacity in liters or cubic feetsafety standards- compliance with regulations: compliance with relevant regulations, such as asme, fda, and iso standards- automatic safety devices: automatic safety devices, such as overheat protection and low-water cut off, to prevent accidents and ensure safe operation- interlocks: interlocks to prevent door opening during operation and ensure user safetyadditional features- data logging: optional data logging capabilities to track temperature, pressure, and cycle data- printed records: optional printed records of cycle data for documentation and quality control- val

Anthropometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government