Tender For corrigendum : 26b80l006 h p advanced non skid coating for helo & flight deck (n8010-007693) , 26b80l006 h p anticorrosive paint for use under non-skid coat (n8010-007694)
Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anticorrosive paint, fresh water tank-n8010-007652 , anticorrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025
Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosivecoating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r
Tender For bid to ras corrigendum : supply of intumescent fire retardant paint (n8010-p009745) , h. p. anticorrosive paint for use under non-skid coat (n8010-007694) , h. p. advanced non-skid coating for helo & flight deck (n8010-007693) , anticorrosive paint used for acid store battery (n8010-007656) , penguard topcoat (n8010-p063128)
Tender For bid to ras supply of galvatume aluminium zinc coating gi based corrugated steel sheet 0.80 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anticorrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 //bid details 2 / 47 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long
Tender For corrigendum : supply of n8010-p009604 black colour tin free spc a f paint for boottop application , n8010-p009602 brown light red tin free spc a f paint for u w application , n8010-p009603 red brown darkred tin free spc a f paint for u w application , n8010-p061977 anticorrosive llps alluminium , n8010-007509 paint polyurethane grey , n8010-p061944 anticorrosive llps grey bronze , n8010-p009679 epoxy based anti corr paint for application in ballast tank , n8010- p009601 tie coat for application of tin free spc a f paints , n8010-p009678 epoxy based primer for application in ballast tank , n8010-p060334 sigma thinner 9192 , nsn8010-720488228 sigmadur gloss pine green ral 6028 , n8010-tp00003 sigma cover 350 green , n8010-tp00002 sigma cover 350 red brown , n8010-007507 paint finishing ral 7040 grey , n8010- 007508 paint finishing ral 9011 black , n8010-007728 h p non skid coating for flight deck w o arrestor gear , n8010-p061691 thinner no 17 jotun paint for epoxies for ekms , n8010-p063130 sigmacover 280 , n8010-007693 h p advanced non skid coating for helo and flight deck , n8010-007694 h p anticorrosive paint for use under non skid coat )