Latest anti corrosive paint Tenders | Government anti corrosive paint Tenders

Central Government/Public Sector

CTN :45737142

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of paint enamel synthetic exterior finishing, traffic green to isc no. 267 of is 5 : 2007 (re-affirmed - 2022) for railway coaches confirming to is 8662 : 2024 and rdso amendment no. 1 (rev. 0)for pigment content as an additional requirement to is 8662 : 2024 w.e.f 01-08-2016 with additional requirement of icf/md/spec/045 issue status 02 rev. 03 dtd. 24-06-2007 and rdso amendment no. 1a(rev. 1.0) effective from june - 2020 as an additional requirement. packing in 20 ltrs. new non-returnable m.s drums to is 2552 : 1989 (re-affirmed - 2018), with amendment no. 1 of 1999, gr. b-2. [ warranty period: 30 months after the date of delivery ] ]

CTN :45704238

17 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anti corrosive paint, fresh water tank-n8010-007652 , anti corrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025

CTN :45712849

20 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of anti-corrosive paint colour sea green as per is-13607 and annexure - c , anti-corrosive paint colour po red as per is- 13607 and annexure - c , anti-corrosive paint colour yellow as per is-13607 and annexure - c , anti-corrosive paint colour black as per is-13607 and annexure - c , anti- corrosive paint colour white as per is-13607 and annexure - c , thinner as per is- 14314 and annexure-c , rust converter as per is- 13515 and annexure-c

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

corporations/Associations/Others

CTN :45695761

01 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For providing of certain items for the sports arena in serilingampally circle-49, slp zone cmc - supply, fabrication, and fixing of prefabricated container-type of size 4.2mx 2.4m x 2.4m height, including complete with all required civil works including foundation, electrical, and plumbing works. the unit shall be made with a structural steel frame using is-standard square/rectangular tubes, externally cladded with 1-1.2 mm corrugated gl sheets with anti-corrosive paint, and internally lined with 8-12 mm cement board/laminated board panels including thermal insulation. the flooring shall consist of 18mm waterproof board with vinyl/ceramic tile finish complete for finished item of work as directed by the engineer-in-charge. installation including cost and conveyance of all materials and all labour charges, fixing charges, transportation etc. , supply and fixing of hexagonal frp ornamental gazebo with bench-outer dimension 18 feet 3-inch ms box pipe structure supported columns and clod with frp ms rafter, seating bench and railing cladding for columns and roof made up of frp. the item is finished with aspa colour and polish including transportation etc., complete , providing, supplying and laying 80 mm thick heavy duty aracon flooring blocks/pavers of approved colour, design and pattern over prepared surface including laying in proper line, level and slope, with 20-25 mm thick bedding sand layer, cutting to edges, filling joints with fine sand, compaction with plate compactor, watering, cleaning and finishing.complete as directed by engineer-in-charge.

CTN :45688858

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For penguard hb white-n8010-p032272 , penguard hb grey-n8010-p032273 , tankguard hb light grey- n8010-p032274 , tankguard hb light green-n8010- p032275 , thinner no. 23 - jotun paint-n8010-p032276 , thinner no. 17 - jotun paint(for epoxies for ekm's) - n8010-p061691 , penguard primer-n8010-p063126 , jotamastic 87 alluminium-n8010-p063232 , paint, traffic. top coat, dark amercoat grey. -n8010- 007717 , paint jotacote universal n10 aluminium- n8010-p031654 , paint jotacote universal n10 grey- n8010-p031655 , penguard topcoat-n8010-p063128 , balloxy hb light beige (jotun) -n8010-p063010 , balloxy hb light green (jotun) -n8010-p063011 , safeguard universal es buff-n8010-p031656 , paint seaquantum pro u light red-n8010-p031657 , paint seaquantum pro u dark red-n8010-p031658 , paint sea queen black-n8010-p031659 , thinner n0.07 - jotun paint-n8010-p031660

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

Central Government And Public Sector

CTN :45618389

10 Jul, 2026 NA

Kaiga - Karnataka

Tender For ceramic brushable anti corrosive paint , metal putty

CTN :45587088

08 Jul, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of paint finishing ral 9011 black , anti corrosive paint water compensated diesel oil tank , anti corrosive paint avgas avcat , pain traffic top coat dark amercoat grey , primer above water exterior for aluminium substrate , paint finishing ral 7040 grey , paint polyurethane grey , paint polyurethane red , paint non slip epoxy d a grey with hardner

CTN :45582581

29 Jun, 2026 5.00 Crore

Vadodara - Gujarat

Tender For annual rate contract for hot applied thermoplastic paint and installing various road furniture in various areas for traffic department (unit rate)

Anti Corrosive Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

Central Government And Public Sector