Latest anti corrosive paint Tenders | Government anti corrosive paint Tenders

CTN :45704238

17 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anti corrosive paint, fresh water tank-n8010-007652 , anti corrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025

CTN :45712849

20 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of anti-corrosive paint colour sea green as per is-13607 and annexure - c , anti-corrosive paint colour po red as per is- 13607 and annexure - c , anti-corrosive paint colour yellow as per is-13607 and annexure - c , anti-corrosive paint colour black as per is-13607 and annexure - c , anti- corrosive paint colour white as per is-13607 and annexure - c , thinner as per is- 14314 and annexure-c , rust converter as per is- 13515 and annexure-c

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

corporations/Associations/Others

CTN :45695761

01 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For providing of certain items for the sports arena in serilingampally circle-49, slp zone cmc - supply, fabrication, and fixing of prefabricated container-type of size 4.2mx 2.4m x 2.4m height, including complete with all required civil works including foundation, electrical, and plumbing works. the unit shall be made with a structural steel frame using is-standard square/rectangular tubes, externally cladded with 1-1.2 mm corrugated gl sheets with anti-corrosive paint, and internally lined with 8-12 mm cement board/laminated board panels including thermal insulation. the flooring shall consist of 18mm waterproof board with vinyl/ceramic tile finish complete for finished item of work as directed by the engineer-in-charge. installation including cost and conveyance of all materials and all labour charges, fixing charges, transportation etc. , supply and fixing of hexagonal frp ornamental gazebo with bench-outer dimension 18 feet 3-inch ms box pipe structure supported columns and clod with frp ms rafter, seating bench and railing cladding for columns and roof made up of frp. the item is finished with aspa colour and polish including transportation etc., complete , providing, supplying and laying 80 mm thick heavy duty aracon flooring blocks/pavers of approved colour, design and pattern over prepared surface including laying in proper line, level and slope, with 20-25 mm thick bedding sand layer, cutting to edges, filling joints with fine sand, compaction with plate compactor, watering, cleaning and finishing.complete as directed by engineer-in-charge.

Central Government / Public Sector

CTN :45491841

30 Jun, 2026 47.25 Lacs

Jagatsinghapur - Odisha

Tender For corrigendum : supply and application of fire retardant paint on electrical cables at paradip refinery and petrochemical complex odisha

CTN :44932476

24 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For bid to ras corrigendum : supply of intumescent fire retardant paint (n8010-p009745) , h. p. anticorrosive paint for use under non-skid coat (n8010-007694) , h. p. advanced non-skid coating for helo & flight deck (n8010-007693) , anticorrosive paint used for acid store battery (n8010-007656) , penguard topcoat (n8010-p063128)