Latest anti fouling system Tenders | Government anti fouling system Tenders

CTN :42583911

17 Nov, 2025 NA

Dhemaji - Assam

Tender For bid to ras supply of provn of 4 mtr x 10 mtr breast wall for t pt to lower balija , 75 mm bore pvc pipe for weep hole of length 1 mtr , coarse sand colon sand shall be clean comma sharp comma angular hard and durable free from adherent coating and shall not contain clay comma mica and other impurities , provn of drainage for t pt to lower balija , soling with gsb size 600m length x 4m width for t pt to lower balija

CTN :42698575

21 Nov, 2025 30.00 Lacs

Bikaner - Rajasthan

Tender For variety of furniture materials - table 3 x 6 1. size:3 feet (width) 6 feet (length) 2.5 feet (height) approximate.2. material:frame and legs made of seasoned teak wood (moisture content 10%).tabletop made of 18 25 mm thick isi-marked commercial board / plywood, of approved quality.all wooden parts shall be termite-proof and kiln-seasoned.3. top finish:top covered with 1 mm thick laminate (matte / glossy) of approved shade and brand.all edges sealed with 2 mm pvc edge banding or polished teak beading.surface to be smooth, scratch-resistant, and heat-resistant.4. drawers & box unit:three lockable drawers on one side, mounted on telescopic channels for smooth sliding.one storage box / cupboard with hinged door and locking arrangement on the other side.all drawers and box interiors finished with melamine or laminate.5. legs & frame:made from solid teak wood sections (minimum 2 2 ), joined with proper mortise and tenon joints.cross supports / bracing provided for additional rigidity and strength.6. hardware:branded locks, handles, channels, and hinges (e.g., godrej / hettich / ebco or equivalent).high-quality adhesive and screws used for assembly.7. polish / color:melamine / pu polish in natural teak, walnut, or as approved by the department.uniform finish without marks or uneven coating.8. quality requirements:table must be sturdy, termite-resistant, moisture-protected, and wobble-free.workmanship should be neat and conform to standard office furniture design.minimum load-bearing capacity: 75 kg distributed load on tabletop.9. warranty:minimum one-year warranty against manufacturing or structural defects., table 4 x 6 1. size:4 feet (width) 6 feet (length) 2.5 feet (height) approximately.2. material:frame & legs: made of first-class seasoned teak wood, moisture content not exceeding 10%.top: 25 mm thick isi-marked commercial board / plywood of approved brand and grade.drawer & box components: 18 mm commercial board with teak wood beading on exposed edges.all materials must be termite-proof, moisture-resistant, and well-seasoned.3. top finish:tabletop finished with 1 mm thick premium laminate (matte or glossy) of approved shade and brand (e.g., greenlam, century, merino).edges: 2 mm pvc edge banding or solid teak beading, finely polished.surface should be smooth, scratch-resistant, and heat-resistant.4. drawers and storage box:three lockable drawers on one side with telescopic channels for smooth movement.one storage box / cupboard with hinged door and individual lock on the same side.all drawers to have soft-closing mechanism and branded locks/handles (godrej / hettich / ebco or equivalent).inner surface of drawers and box to be laminated / melamine-coated for a clean finish.5. frame and support:legs of solid teak wood (2" 2" or heavier section) with cross bracing for strength.all joints properly mortised and tenoned, fixed with wood adhesive and screws for rigidity.table should be wobble-free and stable.6. polish / color:pu or melamine polish of natural teak / walnut / oak shade (as approved).finish to be uniform, smooth, and glossy.7. hardware & accessories:all fittings (locks, hinges, channels, handles) to be branded and rust-proof.cable hole with grommet on top for wiring management.8. quality & strength:structure must be durable, termite-resistant, and long-lasting.tabletop load-bearing capacity minimum 100 kg (uniform load).corners rounded for safety and aesthetics.9. warranty:minimum one-year comprehensive warranty against any manufacturing or structural defect., computer table1. size:approx. 1200 mm (l) 600 mm (w) 750 mm (h)(4 feet 2 feet 2.5 feet)2. material:top: 18 25 mm thick pre-laminated particle board / mdf board / plywood, isi-marked, of approved brand (e.g., century, greenply, action tesa).frame / legs: mild steel (ms) tubular frame (25 mm 25 mm 1.2 mm thick) with powder coating, or solid wood frame as specified.keyboard & cpu units: same material as tabletop (laminated board).3. constru

CTN :42007425

17 Nov, 2025 7.12 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : supply of raw material and consumables e e - micron 50multiplied 2point 1micron , hv gloves electrical lab , thermal gloves , nitrile gloves , first aid kit , aa batteries , aaa batteries , 9 v battery , 555 blade box , button knife , white coat , high precision steel screw drivers set minimum 8 number of set , screw driver set , insulation tape , electric line tester , soldering iron , lead , paste , bosch cutting disc silicon carbide cutting disc 14 inch 355mm , hacksaw blade small , hacksaw blade standard , high density polyethylene pad for dumb bell , drill bit set metal , drill bit set wood , drill bit set concrete , extension wooden switch box 8 multiplied 4 sizes , extension wooden switch box 10 multiplied 4 sizes , plug , 15a sockets , 5a sockets , torch light led , stailess steel tong for mass of zinc coating crucible tong angle and straight , glass rod , tissue paper roll , beaker , measuring cylinder , glass funnel , portable digital density meter or digital hydrometer , antimony trioxide , iso propyl alcohol ar or carbon tetrachloride or benzine , cupric sulphate pentahydrate copper ii sulfate pentahydrate ar , goggles , masking tape one ich roll , ethanol , methanol 1liter , sodium hydroxide pellet ar , silica gel , white jelly , sulfuric acid lr , nitric acid 69 to 72 percent , propane 2 to 01 , ferric ammonium sulphate , potassium hydroxide , ammonium thiocynate , nitric acid 6n , silver nitrate n par 10 0 point 1n , 0 point 1 n sodium hydroxide solution , urea , conical flask , beakerwith marking every 100 ml , test tube 50ml , volumetric measuring jar , volumetric jar , burette , pipette , white banians waste cloth 30cm multiplied 15 cm average size 230 gsm , nonyl phenoxy poly oxyethylene ethanol , teflon tape mechanical lab , hydraulic oil , hydraulic mineral oil , dura cell , double punching machine , metal bonded washer each 10 , adjustable screw spanner , hacksaw frame , hammer , greese , wax , drill bits , mseal , araldite paste , emery paper , nylon brush , hand gloves , junction box , cutting machine wheel , cotton waste , white board marker , permanent marker , banian waste , tile cutting wheel , ammonium chloride , copper sulphate , hcl , citric acid , anhydrous sodium carbonate , sodium perborate , sodium silicate , commercial sodium oleate soap flakes , sodium hypochlorite , distilled water , upvc medium solvent cement , pvc solvent cement , white chalk piece , emery sheetp60grit

CTN :42402854

18 Nov, 2025 46.97 Lacs

Pune - Maharashtra

Tender For corrigendum : supply of surgical consumables echs c c - 6 point 0 with cuff , tube endo tracheal reinforced pvc size 6 point 5 with cuff , tube endo tracheal reinforced pvc size 7 point 0 with cuff , tube endo tracheal reinforced pvc size 7 point5 with cuff , tube endo tracheal reinforced pvc size 8 point 0 with cuff , nasopharyngeal airway with adjustable flange 20 fr 6 point 5 mm , nasopharyngeal airway with adjustable flange 22 fr 7 point 0 mm , nasopharyngeal airway with adjustable flange 24 fr 8 point 0 mm , nasopharyngeal airway with adjustable flange 26 fr 8 point 5 mm , nasopharyngeal airway with adjustable flange 28 fr 9 point 0 mm , endotracheal cathater mount with tubing 22mm taper connection , echogenic ultrasound enhancing nerve stimulator needle 150mm coma 20 g , echogenic ultrasound enhancing nerve stimulator needle 50mm coma 22 g , echogenic ultrasound enhancing nerve stimulator needle 100mm coma 20 g , micro laryngeal tube size 5 mm , catheter suction endobronchial with terminal transparent non toxic pvc tubing size fg 10 coma length 45 cm , catherer suction endobronchial with terminal transparent non toxic pvc tubingcoma size fg 12coma length 50 cm , catheter suction endobronchial with terminal transparent non toxic pvc tubing size fg 14 length 50 cm , catheter suction endobronchial with terminal transparent non toxic pvc tubing size fg 16 length 50 cm , endotracheal catheter mount with tubing 22mm taper connection paediatric , adhesive chg transparent wound dressing 7 x 8 point 5 cm , adhesive waterproof transparent dressing 1 point 5 x 1 point75 inch , adhesive dressing for pediatric iv line 5cm x 5 point7 cm equivalent to 3m teddybear tegaderm pack of 10 , transparent iv dressing 6 point 5 x 7 cm with additional strips with diamond coating pattern , balanced electrolyte solution with ph 7 point 4 and osmolarity 290 to 300 in self collapsible bag of 500 ml , 100 persentage ethylene oxide gas cartridge 100gms , 100 persentage ethylene oxide gas catridge 40 gms , lint absorbent coma cotton , hydrogen peroxide 50 persentage solution in water for plasma sterilizercomabott of 140ml sterilant agent , hydro alcohol solution containing sodium metasilicate and sodium carbonate hp med for super heated and saturated atomized , infection prevention kit comprehensive hiv kit contains a aras reinforced wrap around gown qty x 1 b leg guard large , disposable underpad 60 x 90 cm with sap of 7 grams pack of 10 , ot pack large gamma irradiation sterilized consisting of operating gown large 1 coma operating gown medium 2 coma gloves size 7 coma 2 pairs coma gloves size 7 point 5 1 pair coma towels 75 x 75 cm , lma proseal size 2 reusable , lma proseal size 2 point 5 reusable , lma supreme size 2 , lma supreme size 2 point 5 , lma supreme size 3 , lma supreme size 4 , lma supreme size 5 , film x ray 30 point 5 cm x 25 point 4 cm 12 x 10 high speed , film x ray 25 point 4 cm x 20 point 3 cm 10 x 8 high speed , ankle support ear buds, light weight,filament reinforced polypropylene mesh with large pore size 1.5mm, light weight,filament reinforced polypropylene mesh with large pore size 1.5mm, tissue separating multilayer mesh for intra-abdominal open and laparoscopic , tissue separating multilayer mesh for intra-abdominal open and laparoscopic , absorbable porcine gelatin sponge, box of 10, disposable monopolar diathermy //bid details 2 / 54

Central Government/Public Sector

CTN :42684765

01 Dec, 2025 NA

Multi City - Multi State

Tender For tender for supply of procurement of raw materials and fasteners c c - pure silver wire 99.9 percentage (minimum plus 0.01 - 0.04) , conforming to hal std 1356 size dia 3 mm or as per is 12144-1987 , m.s.rounds hal std 1001 is 1570-gr c-20 dia 7mm is 4855 class-i in 2-3 mtrs length , brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , free cutting brass rod , conforming to hal std 1301 , condition 1/2 hard is 319-74 , type-i bs 2874 grade cz 121 size dia 6 x 2 to 3 meters in length , cold rolled brass sheet , strip and foil th cond half hardcuzn37 , is 410/ c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.3 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50 micro on both sides , cold rolled brass sheet , strip& foil th cond annealedcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cuzn 37 , cw508l-en 1652-r300/ th. 0.3 mm , min. size 350 x 1200 mm. hal std 1300-o. it should be protected with pvc coating morethan 50micro on both sides , electrolytic tough pitch copper foil condition half hard , conforming hal std 1310 / is 191-67 part v grade cu- etp and is 14811 , gr etp/ c11000 , astm b152 , size thickness 0.1 x 356 x 1220 mm with pvc coating on both sides in corrugated bobbin casing. , matrial copper (99.9 percentage min.) plate , condition aneealed , specification qq-c-521 grade a / c11000 , astm b152 , size thickness 15 mm x 1000 x 1000 mm , etp copper sheet 99.9 percentage , condition 1/2 h , conforming to hal std 1310 , is 191-80 (gr.etp) part v , 1972-77-1/2h , bs 2870 c 101 , size thickness 1.6 mm x 350 x 1200 mm with pvc coating on both sides. , al. round con to hal std 1251wp or is 733-75 , gr. (he-15) 24345 or bs 1476 , l64 , l87 , l168 , l65-t6 or qqa 351 gr. 17s or enaw 573-3-2014 dia 7mm x2 to 3 mtrs , glass filled phenolic moulding powder as per amity 16 / amity 157/ hal std 1757/is std 1300 , grade pf2 d4 , type d , filler glass fiber , glass natural colour , bimetal clad strip-grade 223-80 confirming to astm-b-388 size 0.4 x 25mm , hes fe-ni22-cr3 les fe-ni36 , plain washer m2 -gost 10450 class a (or) hal std -8062-m 2 c (d) , austenetic stainless steel as per aisi-303 se/304 (or) corrosion resistance steel as per gost5632 grade 1x18h9 - with passivation. , spring washer m2 -is 3063-or hal std - 8070 - m 2 b (c) - non magnetic (austenetic) stainless steel as per hal std 1206 or aisi -303 se /304 -passivation , hal std 8011 , cheese head screw -m2 x 10 austenetic stainless steel as per aisi-303/304se-passivation. , hal std 8105 , tubular eyelet (brass silver plating) 1.6x4

CTN :42685704

28 Nov, 2025 NA

Multi City - Multi State

Tender For supply of furniture items c c--laboratory table with boxes , steel almirah , steel almirah small , computer table , computer and printer table , office table executive table , lecture stand , revolving chair small , three seat sofa , drawing stool laboratory table with boxes:laboratory table with boxes : table size: 2400 mm length x1200 mm width x 800 mm height (+/- 10 mm) frame: 48 mm square ms pipe and 1. 2 mm thickness. storage boxes: two storage boxes with doors and standard locks made up of 0. 8 mm crca sheet (+/- 0. 1 mm), top: top made of water proof ply board of thickness 25 mm pasted with 0. 8 mm thick sun mica, handle: plastic concealed handle of black colour. edges: edges cover with 2 mm thick hot glue pvc lipping pasted with cnc machine, colour: top mica chocolate brown, frame legs brown and storage boxes of cream colour. coating: powder coating range 50-55 microns. , steel almirah:size:- height-1981mm, width-916 mm, depth 486mm,construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final ) /bid number: gem/2025/b/6865848 * /dated: 10-11-2025 & & / bid document1 / 25finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. , steel almirah small :size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base, computer table :computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolerance on overall sizes.

CTN :42669178

21 Nov, 2025 16.22 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : open tender for labour charge for 55mm2 rabbit conductor coating 2 mm thick of xlpe inner side & 1.2 mm thick pvc outer side of conductor for kalol do

CTN :42487505

18 Nov, 2025 6.00 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of various type instruments at rdvv, jabalpur - tender for supply of instruments, hand grinding mill multi purpose grinder for excellent grinding either wet or dry substances., pfizer type hardness tester, digital balance capacity : 600 gmreadability : 0.01 gm (10 mg )pan size : 115 mm diaalong with wind draft shield, distillation unit for distilled water 3 to 4 ltr cap ( all glass ) ( with auto cut off device ), sieves set (pharmacopeia standard) set of 7, pestle and mortar porcelain 100 mm, pestle and mortar glass 100 mm, suppository moulds of three sizes (1gm 4 hole), lipstick moulds full set 4 hole 6 hole, hemocytometerwith rbc & wbc counting chamber the set is well equipped with neubars counting chamber bright line, rbc, wbc pipettes. (supplied with standard counting chamber of bright line with greater visibility at all magnification.), stethoscope good quality, charts (different types) 30 x10 rollered, permanent slides diff., slides pkt. of 50, cover slips of 10gm pkt. box, magnetic stirrer with hot plate, speed control stirring capacity : 2 litre, hemoglobinometer top quality {h.b.}, tablet coating pan, tablet punching mechine (hand operated), water bath size : 350 x 400 x 100 mm no of holes : 12 of 3 inch diadoubled walled, outer walled mild steel , epoxy coated & inner chamber of stainless steel.concentric rings: 6 nos of 3 diai.e (75 mm) temperature range: ambient + 5 c to 90 cthermostatically controlled temperature. provided with indicating lamp & on/off switch. electrically operated: 230 v ac single phase power., human skeleton, digital p h meter features : temp. comp. : 0 to 100oc power required : 230 v ac 10%50 hz, 4 va warming time : 5 minutes weight : 1 kg (approx.) body : abs dimension ; 95 mm (h) x 225 mm (w) x 215 mm (l) electronic buffer : equivalent signal output of ideal electrode in solution of 9.20, 7.00, 4.00 ph . useful for self diagnostic electrode : combined pvc sleeved stirrer speed 200rpm fixed accessories : stand set, electrode clamp, rod, patch cord for electronic buffer, teflon magnet, buffer tablets for 9.20, 7.00, 4.00 ph, screwdriver and dust proof cover,, digital metar auto clave standard features and specifications: outer body of ss mirror finish, inner body ss lm 304. lid of thick ss designed to withstand pressure up to 30 psi, operating pressure 15-22 psi, factory set at 15 psi fitted with pressure gauge, safety valve, steam release valve. additional safety with extra steam release valve & safety temp controller. digital temperature controller/indicator to control temperature/ pressure with temp indication. factory set for 121 c (15 psi) with built in digital adjustable timer with auto cut off. foot lifting arrangement (for sizes 18"x24"& 22"x30" only). electrically operated on 230v/50hz.technical data:inner chamber working chamber volume rating size (dia x ht) cms size (dia x ht) cms. ltrs (kw) 35 x 65 35 x 55 52 3.050-litre autoclave specification type: vertical capacity: 50 litres chamber material: stainless steel (ss 304/ss 316) jacket material: stainless steel (ss 304) door type: single (automatic) lid/closure mechanism: radial locking system / foot-lifting arrangement working pressure: 15 to 30 psi (1 to 2 bar) working temperature: 121 c to 134 c sterilization cycle time: adjustable (standard 15 30 minutes) pressure gauge range: 0 60 psi temperature control: digital pid controller with displayheating system heating element: electric (immersion heaters) / steam (external boiler connection) power supply: 220v/380v, 50hz/60hz (as required) power consumption: approx. 3-6 kw, mini-centrifuge featurespecificationspeed range2,000 15,000 rpm (varies by model)maximum rcf (relative centrifugal force)200 21,000 grotor capacity6 to 12 tubes (0.2 ml, 0.5 ml, 1.5 ml, 2 ml)rotor typefixed-angle or interchangeable rotorstimer0 99 minutes or continuous operationacceleration/deceleration time10 30 secondsnoise level 60 dbdisplay typeled or lcd display for speed and timesaf

Central Government/Public Sector

CTN :42531708

21 Nov, 2025 5.72 Lacs

Bangalore - Karnataka

Tender For tender for supply of hvac operational spares - ahu rubber pads, adapter sleeve -h2306 (for uk206 bearing), adapter sleeve h2307 (for uk207 bearing), radial insert ball bearing desig: uc 207, ball bearing desig: uk 207, ahu belt no. a103, ahu belt no. a126, ahu belt no. a25, ahu belt no. a28, ahu belt no. a29, ahu belt no. a32, ahu belt no. a34, ahu belt no. a36, ahu belt no. a38, ahu belt no. a39, ahu belt no. a40, ahu belt no. a44, ahu belt no. a77, ahu belt no. a83, ahu belt no. b44, ss 6 mm x 40 mm bolt & nut with washer, reciprocating compressor r 404 a (for cold room), araldite standard resin epoxy adhesive & hardener, grease size 1/2 kg, silicon sealant size: 280 ml, metal pipe thread seal size: 200 gram colour: black, cotton waste type: white, collar for copper tube hard drawn, size: 1/2 inch, collar for copper tube hard drawn, size: 1/4 inch, collar for copper tube hard drawn size: 3/4 inch, collar for copper tube hard drawn, size: 3/8 inch, collar for copper tube hard drawn size: 5/8 inch, elbow for copper tube hard drawn, size: 1/2 inch, elbow for copper tube hard drawn size: 1/4 inch, elbow for copper tube hard drawn, size: 3/4 inch, elbow for copper tube hard drawn size: 3/8 inch, elbow for copper tube hard drawn, size: 5/8 inch, reducer for copper tube hard drawn, size: 1/2 x 5/8 inch, reducer for copper tube hard drawn, size: 1/4 x 3/8 inch, reducer for copper tube hard drawn size: 3/8 x 1/2 inch, reducer for copper tube hard drawn size: 5/8 x 3/4 inch., copper tube hard drawn size: 1/2 inch, copper tube hard drawn size: 1/4 inch, copper tube hard drawn size: 3/4 inch, copper tube hard drawn size: 3/8 inch, copper tube hard drawn size: 5/8 inch, copper tube soft drawn size: 1/2 inch, copper tube soft drawn size: 1/4 inch, copper tube soft drawn size: 3/4 inch, copper tube soft drawn size: 3/8 inch, copper tube soft drawn size: 5/8 inch, resin for cooling tower frp coating --frp cooling tower, accelerator, cobalt naphthenate (6% cobalt) -frp cooling tower, hardener methyl ethyl ketone peroxide (μεκρ) -frp cooling, tower, 4-way diffuser with vcd size: 595 x 595 mm neck, size: 310x310 with vcd, 4-way exhaust, diffuser size: 595 x 595 mm, neck size: 310 x 310 mm, without vcd, 4-way diffuser with vcd size: 445 x 445 mm, neck size: 290 x 290 mm with vcd, 4-way diffuser with vcd size: 445 x 445 mm, neck size: 290 x 290 mm vithout vcd, duct insulation thickness: 13 mm (roll), duct insulation thickness: 09 mm (roll), electrical insulated rubber gloves, 4-way exhaust diffuser size: 375 x 375 mm, neck size: 210 x 210 mm without vcd, 4-way exhaust diffuser size: 600 x 600 mm, neck size: 450x450 mm without vcd, pvc flexible air duct hose size: 300mm (12 inch), pvc flexible air duct hose size: 150mm (6 inch), pvc flexible air duct hose size: 200mm (8 inch), grid ceiling tile grille with vcd size: 600 x 600 mm., heavy duty grid floor tile grille with vcd size: 600 x 600 mm., 1/2 inch brass bsp male x 15 mm hose barb adapte, 1 inch brass bsp male x 25 mm hose barb adapte, 1 1/4 inch brass bsp male x 32 mm hose barb adapter, 2 inch brass bsp male x 50 mm hose barb adapter, inline duct fan size: 160mm, tubular insulation size: 1/4 inch thickness: 13 mm, tubular insulation size: 3/4 inch thickness: 13 mm, tubular insulation size: 5/8 inch thickness: 13 mm, tubular insulation size: 7/8 inch thickness: 13 mm, tubular insulation size: 1 inch thickness: 13 mm, 1 inch ms bsp male x 25 mm hose barb adapter, air conditioner outdoor unit wall mounting stand, double 'b' groove pulley 140 mm pcd shaft size: 40mm, refrigerant r 404 a, split ac flexible pvc drain hose size: 3 meter, polyurethane foam saddle size: 400 mm, gi self tapping screw size: 3/4 inch (20 mm) head type: hex, ball bearing desig: 6000-z, ball bearing desig: 6205/2z c3, ball bearing desig: 6206/2z c3, welding/heat protection heavy duty gloves, welding stinger electrode holder with lead and ground clamp

Central Government/Public Sector

CTN :42531239

21 Nov, 2025 2.22 Crore

Ranga Reddy-T - Telangana

Tender For tender for supply of austenitic type free machining non-magnetic bright quality stainless steel round conf.to hal std 1206 , aisi-303 - gr18/10 , dia 22mm x 2 to 3 mtrs length , austenitic type (303) free machining non-magnetic bright quality stainless steel round , specification hal std 1206 / 303 , astm a 582 size dia 40 mm x 1 to 2 meters in length. , austenitic type free machining non-magnetic bright quality stainless steel hexagonal conf.to hal std 1206 , aisi-303-gr18/10 , a/f 3.0 mmx2 to 3 mtrs length , thermo couple ansi type k(kn) (ni-95 percentage , al-2 percentage , mn-2 percentage , si-1 percentage)- rod dia 12.7 mm condition annealed (or) alumel (ni-95 percentage , al-2 percentage , mn-2 percentage , si-1 percentage rod dia 12.7 mm condition annealed in straight rods , thermo couple ansi type k(kp) (ni-90 percentage , cr-10 percentage)- rod dia 14.3 mm condition annealed and 1 to 2m length as per astm e230 or nickel chromium alloy rod (ni-90 percentage , cr-10 percentage) dia 14.3 mm and 1 to 2m length as per astm e230 or chromel rod (ni-90 percentage , cr-10 percentage) dia 14.3 mm and 1 to 2m length as per astm e230 or isatherm plus type k part no 2.4870 , rod dia 14.3 mm and 1 to 2m length straight rods , mild steel cold drawn round conforming to hal std 1001 , is 1570 part ii , grade c 20 / en 3 b , bs 970 / bs 070 m 20 , bs 970 size dia 45 mm x 1 to 2 meters in length. , austenitic type (303) free machining non-magnetic bright quality stainless steel round , specification hal std 1206 / 303 , astm a 582 size dia 7 mm x 2 to 3 meters in length , austenitic type free machining non-magnetic bright quality stainless steel rounds conf.to hal std 1206 , aisi-303-gr18/10 , dia 14mm 2 to 3 mtrs length. , austenitic type (303 se) free machining non-magnetic bright quality stainless steel round rod conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size dia 20 mm x 2 to 3 meters in length. , austenitic type free machining non magnetic bright quality stainless steel hexagonal bar , specification hal std 1206 / 304 , astm a 276 grade 18/10 , size a/f 10mm x 2 to 3 meters in length. , austenitic stainless steel sheet , condition +at (solution annealed) , specification z10cnf17-08 (or) x8crnis18-09 , as per en 10088-2 , tensile strength 500-750 mpa , size 0.4 mm x 500 x 500 mm pvc coating should be above 50 microns on both sides. , naval brass rods , condition annealed , conforming to is 291 1989 , grade 1 , / hal std 1302 / bs 2824 gr cz-112 , size dia 4mm x 2 to 3 meters in length , nickel silicone bronze round , condition r490 , grade cuni2si / cw111c / uns c64700. specification en12163 , size dia 6 mm x 1 to 2 meters length , brass wire , rivetting quality , condition annealed conforming to is 4413 , grade cuzn 37 / hal std 1303 , size dia 2.5mm of standard length , aluminium alloy sheets , hal std 1253- o or bs 2l-80 or l-80 , or bs 1470 gr.ns4-o , enaw 573-35251 or is 737(ns-4) gr 52000 , size thickness 1 x 1000 x1000 mm , annealed condition with pvc coating on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th. thickness10 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th. thickness12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th. thickness14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250.

Anti Fouling System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector