Get complete information related to latest Anti Theft Measure Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Anti Theft Measure Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Anti Theft Measure Tenders.
Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)
Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, antitheft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc
Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))
Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))
Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)
Tender For wheel diameter gauge similar to model wd-2 (e) with digital display for measurement of wheel diameter in both mounted (in situ) and un mounted wheels of locos carriage and wagons. the gauge gives direct diameter readings on digital display with working manual. specification:- 1. measuring range:- 650 to 1250 mm 2. accuracy: +/- 0.2 mm 3. applicability:- b g wheels 4. resolutions:- 0.1 mm/0.01 mm /0.001 mm (selectable) 5. measurement at distance of edge:- 63.5 mm 6. distance between axes of ball base:- 250+/-0.5 mm 7. display:- wireless display on android 7 segment led/lcd 8. power supply:- inbuilt rechargeable battery 9. operating temperature: -10 degree celsius to 60 degree celsius 10. operating humidity:- 15-85% (no condensation) 11. storage of data:- wireless data transmission with unlimited data storage 12. measurement scheme:- 3 point measurement of curve using linear encoder 13. carrying case:- padded ruggedized pvc carrying case 14. function ability: measurement of wheel diameter is possible for loose wheel set as well as without dismantling wheel set from wagon , carriage or locos. 15. recording of readings:- optional facility on android/device 16. data transfer:- through wireless bluetooth 17. weight:- approx 750 gms18. make: pie/ jyoti/ ganapathi/ electronica or equivalent with calibration certificate & isi certified. [ warranty period: 30 months after the date of delivery ]