Latest application form Tenders | Government application form Tenders

Corporations And Associations And Others

CTN :41287856

22 Aug, 2025 NA

Panaji - Goa

Tender For application form for enlistment of contractors/agencies with infotech corporation of goa limited towards carrying out renovation/interior works for various government departments, corporations, autonomous bodies, etc

CTN :40916863

02 Aug, 2025 2.07 Lacs

Bathinda - Punjab

Tender For bid to ras bid to ras supply of arch wire ss preformed ideal arch form lower comma 0 point 016 inch comma round , bonding system light cured with adhesive kit complete , elastic chain 15 feet spool comma closed continuous , niti open coil spring 0 point 012 into 0 point 030 inch thickness wire spool 15 inches , niti closed coil springs with eyelet pkt of 10 for 150 to 200 gm comma 6 mm , arch wire niti copper preformed ideal arch form upper comma 0 point 016 round , stainless steel mim orthopedic headgear tubes 0 point 045 inch set of two , mathieu wire ligature twister , pea mbt with fd numbering with bondable upper double and lower double first molar tube 022 , preformed loop arch wire for retraction tma 24 to 42 inter incisal distance , posted arch wire preformed ss 22 to 42 inter incisal distance , crimpable hook cross section 0 point 016 into 0 point 022 inches , arch wire niti copper lower 0 point 016 round , arch wire niti copper lower 0 point 016 into 0 point 022 , niti preformed trueform archwire lower pkt 0f 10 0 point 017 into 0 point 025 rectangular , niti preformed trueform archwire lower pkt 0f 10 0 point 019 into 0 point 025 , niti preformed trueform archwire lower pkt 0f 10 0 point 021 into 0 point 025 , arch wire niti copper preformed ideal arch form lower 0 point 016 rcos , elastic rubber separators , molar bands pea roth 18 by 25 upper triple and lower double 400 bands from 34 to 40 , arch wire ss preformed upper comma 0 point 016 into 0 point 022 inch , arch wire ss preformed lower comma 0 point 016 into 0 point 022 inch , arch wire ss preformed lower comma 0 point 019 into 0 point 025 inch , arch wire ss preformed lower comma 0 point 021 into 0 point 025 inch , elastic chain 15 feet spool comma short , elastic chain 15 feet spool comma long , latex elastic intraoral packet of 1000 comma 3 by 16 inches comma 3 point 5 ounce , latex elastic intraoral packet of 1000 comma 5 by 16 inches comma 3 point 5 ounce , latex elastic intraoral packet of 1000 comma 3 by 8 inches comma 3 point 5 ounce , arch wire niti copper preformed ideal arch form upper comma 0 point 016 into 0 point 022 , arch wire niti copper preformed ideal arch form upper comma 0 point 019 into 0 point 025 , arch wire niti copper preformed ideal arch form upper comma 0 point 021 into 0 point 025 rectangular , elastomeric lig a rings clear , elastomeric lig a rings colored , orthodontic brush , niti intrusion arch wire 19 inch into 025 inch upper , niti intrusion arch wire 19 inch into 025 inch lower , rectangular base //bid details 2 / 33

Central Government/Public Sector

CTN :41263230

14 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For bank desires to take premises on rent for opening of its new branches in the below mentioned locations of bhopal. interested persons having premises on ground floor of required carpet area of 1000-1200 sq feet and wiling to rent may contact/collect the application format from uco bank zonal office bhopal

Central Government/Public Sector

CTN :41128595

07 Aug, 2025 10.00 Lacs

Hooghly - West Bengal

Tender For printing items for use of hospital services - ecg/x-ray/usg/ct-scan form size:- 8.5" x 6.5", 70 gsm paper ,100sheet/pad, single side, top head pad binding., requisition form size :- 8.5" x 7" 70 gsm, 100pcs/pad ,single side, top head pad binding., anesthesia safety checklist size :-8.5"x11", 70 gsm paper, 100 sheet/pad, both side top head pad binding., sterilization/autoclave register size:- 15"x10", 80 gsm paper, 200 sheet/reg. ,both side( side stitch binding), with no., baby identity card for sncu size :-9.2"x5" mg board ,paper, prescription slip (opd) size:- 5.5"x4" 70 gsm paper, single side,top head pad binding, voucher for free services size:- 11"x4.5" 70 gsm paper, with no. 100sheet/book, single side, format size:- 12"x8.5", 70 gsm, 100pcs/pad, both side, top head pad binding., blood transfution consent form 70 gsm single side size: 13" x8.5" 100pcs/pad, pre-anaesthetic clinic consultation form size 13"x8.5", 70 gsm 100pcs/pad both side ,top head pad binding, requisition for jssk size:- 10.5"x8" 70 gsm, 50x3=150/book , colour, serological form size :-11"x8.5" 75 gsm, 100pcs/pad , single side, top head pad binding., register for o.tsize 18"x12" 80 gsm 150 folio with number, medical certificate of cause of death size 11.5"x8.5" 75 gsm, 100pcs/pad , single side, top head pad binding., consent form for anaesthesia/sur. size :-11"x8.5" 70 gsm,100pcs/pad both side,top head pad binding., follo up voucher for sncu size :- 11"x4.5" 70 gsm paper, with no. 100sheet/book, single side, application form for disability size :- 12"x8" 75 gsm, 100pcs/pad both side with no, top head pad binding., patient satisffaction form (ipd) size :- 13"x8.2" 70 gsm, 100pcs/pad both side, top head pad binding., anaesthetic record form size:- 17" x 13.5" 75 gsm.., thalassaemia treat ment card size :- a4 paper size, 100 gsm, green colour with six colour image, single side, format size 12"x8.5" 75 gsm, 100pcs/pad, single side, top head pad binding., monitoring sheet (sncu) size 11"x8.5" 75 gsm, 100pcs/pad both side, colour, top head pad binding, check list size - 13.5"x8.5" 70 gsm, 100pcs/pad, single side,top head pad binding., ssp voucher size - 8"x5.5" 70 gsm 50x2=100 sheet/book with no. with logo., cross match report form size -10.5"x8.5" 75 gsm 50x2=100/book both side, dengue top sheet size- 13" x8.5" 70 gsm 100pcs/pad both side,top head pad binding., diet sheet size: 13"x8.5", 100pcs/pad, both side, top head pad binding., indoor in patient register 80 gsm 200 folio size:-18 inch x12 inch with no., jsy correction form size = 8.25"x11.5", 70 gsm 100pcs/pad, single side, top head pad binding., register size- 17"x27", 200/ folios/reg. 80 gsm, both side with page number, register size - 18x12" 200 folio/reg. 80 gsm, both side with page number, c b c form size- 8.5"x6.5" 70 gsm, 100pcs/pad single side ,top head pad binding., urine report form size- 8.5"x6.5" 70 gsm, 100pcs/pad ,single side, top head pad binding., medicine slip size- 12"x8.5" 70 gsm, 100pcs/pad, single side, top head pad binding., ccu reporting format size- 11"x8.5", 75 gsm, 100pcs/pad, single side, top head pad binding., audiogram format size= 11" x8.5" 70 gsm, 100pcs/pad single side, c.c.u consent form size- 11.5"x9" 75 gsm, 100pcs/pad both side, top head pad binding., visiting gate pass mg board, green & red colour. size:- 3" x4", bill transit register size - 13"x8.5,80 gsm, 200folios/reg both side, correction in the birth event size- 11"x8.5" 70 gsm,100pcs/pad,single side,top head pad binding., correction in the dearth event size- 11"x8.5" 70 gsm, 100pcs/pad, single side, top head pad binding., application form for death certificate size 11.2"x8.5" 70 gsm, 100pcs/pad with no, single side, top head pad binding., application form for birth certification size- 11.2"x8.5" 70 gsm, 100pcs/pad with no, single side, top head pad binding., blood bag label size -4.5"x4.5" colour rate/pc, gumy sticker, disposal order form of dead body size- 10.5"x8.5" 70 gsm, 50x2=100pcs/book with no. single s

corporations/Associations/Others

CTN :41185651

13 Aug, 2025 4.68 Lacs

Ajmer - Rajasthan

Tender For supply of 15x12x1 single part : : - blank continuous stationery 15 by 12 by 1 inch , blank continuous stationery 15 by 12 by 2 inch , dgh ps fno 700 , dgh fno 720 , special mhr fno 3251 , nomination form fno 3264 , hospital treatment form fno 3816 , declaration in lieu of 3784 fno doaj101 , sss premium deduction form do aj 142 , death claim requirement fno do aj 225 , stationery requisition form fno do aj 268 , stationery forms checking form fno do aj 428 , death claim control register fno do aj 508 , surrender questionaire interview fno doaj555 , huf addendum to proposal form fno do aj 559 , addendum for life of non earning major lives fno do aj 560 , annexure lim fno do aj 561 , furniture and equipement stock received book f no 4908 , file flat

Co-operative

CTN :41150472

29 Jul, 2025 NA

Mau - Uttar Pradesh

Tender For supply of stationery-manual and logging form, general entry gate pass, invert gate pass, record register of vehicles bringing sugarcane to the mill, material request, duty chart register, security guard, boiler log book, application for advance, daily sugar lifting, form of statistics and orders, bagging room book ledger book, sugar dispatch, gold water log sheet, etp & sulphate log sheet, return sugar sale, form no. 20 monthly, daily sugar cane production report, four hours report, travel allowance bill, printed on both sides, letter pad, excel bond paper, format of travel programme for employees, form-a, leave application form 16g24/4a letter pad, excel bond 100 sheet a joining report 100 sheet a no objection certificate, u.p.c.a daily attendance register, signature register of clerical staff, 100 pages, attendance signature register, over time signature register, signature register supervisor, 100 pages, leaflet appeal to farmer brothers, leaflet regarding sugarcane supply from farmer brothers for crushing session 2024-25, inspection register a-4a gate pass for employees, 100 pages, purchase indent, 50g3a notice, 100 pages, attendance slip of employees present at 80 book or centers, payment sheet register, daily sugarcane purchase register, daily cane report of cane purchasing center, kanta checking register, notice, notice, notice, notice, notice, notice of 100 pages. 4. check the balance sheet of the employees present at the centers. india 811 sc500 cc, 1000 cc, 1200 cc, 1300 cc, 1400 cc, 1500 cc, 1600 cc, 1700 cc, 1800 cc, 1900 cc, 2000 cc, 2100 cc, 2200 cc, 2300 cc, 2400 cc, 2500 cc, 2600 cc, 2700 cc, 2800 cc, 2900 cc, 2900 cc, 2900 cc, 2900 cc, 2900 cc, 2900 cc, 2900 cc, if you want to know why the 2000 rupees per kg, then you should get it yourself from the inside, after that you should take the 200 rupees per kg of water, then the 2500 rupees per kg of water should be taken as the starting point, after that you should take the 200 rupees per kg of water as the starting point, after that you should take the 2500 rupees per kg of water as the starting point temporary loan register, dg set register, eiu register, mr book, goods inward register, rg-9 register, challan book, outer gate pass, oxygen cylinder register, stock register, outgoing register, incoming register, physical verification book

CTN :41166613

29 Jul, 2025 6.58 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/02 - repair of road from jalalgarh railway gumti to mahiyarpur via chauhan tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wmm(wet mix macadam)providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., cement concrete/panel concrete pavementconstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383 as per actual design mix, processing 28 days minimum compressive strength of 35 (thirty five) mpa and minimum flexural strength of 4.5 (four point five) mpa, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, constructi

CTN :41166599

29 Jul, 2025 10.89 Crore

Bagaha - Bihar

Tender For rrsmp-25-26 bagaha-1-04 - phagunahta to phagunahta sah tola, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate w

CTN :41166600

29 Jul, 2025 22.77 Crore

Bagaha - Bihar

Tender For rrsmp/25-26 bagaha-1/01 - bathwariya to bathwariya purab tola, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate

CTN :41166602

29 Jul, 2025 28.07 Crore

Bagaha - Bihar

Tender For rrsmp/25-26 bagaha-1/02 - binwaliya p.school to sikatiya pmgsy road, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle

Application Form Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Co-operative