Latest arc welding gun Tenders | Government arc welding gun Tenders

State Government

CTN :43285965

05 Jan, 2026 11.79 Lacs

Vadodara - Gujarat

Tender For strengthening work of downstream side bottom skin plate for radial gates by ms angles from t stiffeners to bottom horizontal girder by providing additional stiffeners in the bottom horizontal girder both sides by replacing the corroded bracing angles between horizontal girders and repairing of 60/20 mt gantry crane by temporary jacking and locking/unlocking and replacing malfunctioned parts of lt drive and main hoist including cost of gas cutting, welding, labours, materials, tools, tackles, scaffolding, transportations etc. as per actual site situation and instruction of engineer in charge at karjan reservoir project.

CTN :43290934

06 Jan, 2026 10.20 Lacs

Surat - Gujarat

Tender For supply of sensing and gis , soft computing with matlab programming , gate 2026 civil engineering book , engineering material , highway engineering , airport planning and design , transportation engg , environmental engineering sewage waste disposal and air pollution engineering vol2 , hydrology and water resoureses engg , traffic engineering and transport planning , construction engineering management of projects , transportation engineering , disaster management , modern project management , building materials , basic civil engg , environmental engg1 water supply engg , environmental engineering 2 waste water engg , ground improvement techniques , project planning control with pert cpm , practical construction contract issues which are not commonly understood , infrastructure and contract management 2nd edition 2024 , infrastructure engineering management , iot and smart cities , disaster management act 2005 , project management cpm, pert gertscheduling with linear programming , guide to rera with rera check lists by taxmann gujarat rera manual , law relating to tenders and government contracts , irrigation engineering , indian constitution , surveying vol i , surveying vol ii , surveying vol iii , building planning designing and scheduling , digital principles and applications , a first course in artificial intelligence , integrated electronics , cmos digital integrated circuits analysis and design design of analog cmos integrated circuits , introduction to robotics , engineering circuit analysis , introductory circuit analysis electronic devices and circuit theory 11e , computer networking and the internet computer networks and internets 6e , arm system on chip architecture 2nd edition , basic vlsi design , signals and systems , automation, production systems, and computer integrated manufacturing 5th edition , internet of things an indian adaptation concepts and applications , machine learning with python , communication systems , an introduction to analog and digital communications , linear circuits analysis , electronic devices and circuits , gate 2026 electronics engineering previous year solved papers , isro drdo bsnl previous years solved papers of electronics engineering , a handbook on electronics engineering , an introduction to internet of things connecting devices edge gateway and cloud with applications , industrial automation and robotics 2nd edition , introduction to the constitution of india , the constitution of india , thermodynamics basics and applied thermodynamics , principles of materials science and engineering , fundamentals of finite element analysis , shigleys mechanical engineering design , engineering thermodynamics , manufacturing technology vol1 5th edition , design of machine elements , machine design data book , oil hydraulic systems-principles and maintanance , fluid mechanics 9th edition , engineering fundamentals of the of internal combustion engine , materials science and metallurgy , manufacturing engineering and technology , fluid mechanics an introduction 3rd ed , fluid power with applications , callisters material science and engineering , project management , quality management , fluid mechanics and machinery , fluid mechanics , gate mechanical engineering , welding engineering and technology , industrial safety health and environment management systems by , automobile mechanics , fluid machinery , engineering mechanics , shortcuts in reasoning //bid details2 / 163verbal nonverbal analytical critical for competitive exams , general quantitative aptitude for competitive exams , oil hydraulics and pneumatics , project management cpm pert gert scheduling with linear programming , general knowledge , how to crack test of reasoning , a new approach to reasoning verbal non verbal , mechanical system design , hydraulic and fluid mechanics , fluid mechanics hydraulics and hydraulic machines , environmental engineering fundamentals sustainability design 3rd edition , the mbr book 2nd edition p

CTN :43186508

02 Jan, 2026 11.11 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of village santhe katte at shridaragadda - ks-portland cement, ks-coarse sand (zone iii), ks-mixer (concrete small used in culvert), ks-cudddapah slab 4 cm thick/shahabad/thandur blue, ks-weld mesh 75 x 25 mm of 6g to 10g, ks-ms pipes of 80 mm to 100 mm dia, ks-rms gusset plate, ks-corbon electrodes, ks-welder grade i, ks-hom of welding and grinding machine, ksa-tools and plants at 2 percent on material, ks-ms flat 12 x 75mm, ks-cast iron ornamental design, ks-m.s. square bright bars 20mm, ks-cast iron arrows, ks-expansion bolt, ks-ready mix primer paint (ready mix red lead paint), ks-painter class i, ks-enamel metal paint, ks-dry distemper, ks-whitening, ks-add watering charges at 1 % on material, ks-lime, ks-unit cost as per the specification, ks-cobble stones of 60 mm thick, ks-plate vibrator having 3 ton compaction force, ks-gravel 2.36 mm/murrum, ks-water tanker, ks-vibratory roller 8 tonne, ks-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, ks-casurina poles 100 - 150 mm, ks-tmt bars fe 500, ks-binding wire, ks-silver oak or equivalent planks 38 mm thick, ks-casurina poles 75 - 100 mm dia, ks-broken stone aggregate 20 mm size, ks-broken stone aggregate 12 mm to 10 mm size, ks-plasticizer / super plasticizer, ks-mixer (concrete) - 1 cum capacity, ks-hom of vibrator 0.71 days, ks-boulders, ks-size stone 20 x 20 x 25 cms, ks-bond stone 20 x 20 x 45 cm, ks-mechanic class ii/mechanic hmp grade i/eme grade, ks-hom of cutting and grinding machine, ks-rubble stones, ks-broken stone aggregate 40 mm size

CTN :43140789

02 Jan, 2026 5.61 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of govt h p school compound at meenalli - sc2-ms flat 12 x 75mm, sc2-cast iron ornamental design, sc2-m.s. square bright bars 20mm, sc2-cast iron arrows, sc2-welder grade i, sc2-hom of welding and grinding machine, sc2-mechanic class ii/mechanic hmp grade i/eme grade, sc2-hom of cutting and grinding machine, sc2-painter class i, sc2-add providing and removing scaffolding at 3 percent on labour, sc2-enamel metal paint, sc2-tools & plants and electrical charges at 2 percent, sc2-plastic emulsion paint, sc2-add brush putty sand paper roller at 5 percent on cost of paint, sc2-silver oak or equivalent planks 38 mm thick, sc2-casurina poles 100 - 150 mm, sc2-portland cement, sc2-coarse sand (zone iii), sc2-mixer (concrete small used in culvert), sc2-add watering charges at 1 percent on material, sc2-broken stone aggregate 20 mm size, sc2-broken stone aggregate 12 mm to 10 mm size, sc2-mixer (concrete) - 1 cum capacity, sc2-solid concrete blocks (40 x 15 x 20 cms) 4 n/sqmm, sc2-tmt bars fe 500, sc2-binding wire, sc2-plasticizer / super plasticizer, sc2-boulders, sc2-size stone 20 x 20 x 25 cms, sc2-bond stone 20 x 20 x 45 cm, sc2-broken stone aggregate 40 mm size, sc2-granite/trap broken metal 100 mm and down size

CTN :43086738

26 Dec, 2025 6.38 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of nrlm shed av/58151 at sangankallu village - sn-painter class i, sn-add providing and removing scaffolding at 3percentage on labour, sn-white cement based putty at 2sqm kg at rs. 1050 per kgs, sn-add brush, putty, sand paper, roller at 5percentage on cost of paint, sn-add handling , loading and unloading at 1percentage on material, sn-add watering charges at 1 percentage on material, sn-plastic emulsion paint , sn-vitrified tiles 10 mm thick 600 x 600 mm, sn-adhesive for tiles, sn-grout for vitrified tiles, sn-spacers for vitrified tiles, sn-mason class i (with tools), sn-honnewood planks for panels 20 mm thick, sn-add cutting and other wastage 5precentage , sn-carpenter assistant, sn-add handling , loading and unloading at 2percentage on material, sn-mathi/nandi wood scantling, sn-mathi/nandi wood planks for panels 25 mm thick, sn-aluminium window frame section 1.20 mm thick, sn-nylon rollers, sn-rubber beading for shutters beading, sn-pvc beading, sn-alluminium tower bolt - 20 cm, sn-alluminium handles - 15 mm, sn-cleat angles, sn-chrominum plated screws, sn-5.50 mm thick plain glass, sn-add 15percentage wastage for glass, sn-fabricator, sn-add hom of welding and grinding machine at 2precentage on material, sn-portland cement, sn-coarse sand (zone iii), sn-mixer (concrete small used in culvert), sn-tmt bars fe 500, sn-binding wire, sn-silver oak or equivalent planks 38 mm thick, sn-casurina poles 100 - 150 mm, sn-casurina poles 75 - 100 mm dia, sn-broken stone aggregate 12 mm to 10 mm size, sn-plasticizer / super plasticizer, sn-mixer (concrete) - 1 cum capacity, sn-jungle wood runners and planks, sn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, sn-broken stone aggregate 20 mm size, sn-hom of vibrator 0.71 days

Central Government/Public Sector

CTN :43033385

24 Dec, 2025 2.16 Crore

Raigad - Maharashtra

Tender For dismantling, removing and taking away of building scrap and building material of a-43 to a-65 of sector i and a-13 to a-20 of sector iii (total 31 no. of buildings) in jnp township - scrap value, reinforcement steel, solid core shutter 35 mm thick with commercial veneer facing and phenol bonded (25% of 1470) = 367.5, steel windows, m s grill, railing, total, demolition cost, removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., dismantling steel work in builtup section in angles tees, flats and channels of rolling shutters, grills, gates, fencing, hording, including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 m lead., removing iron pipe raling having wooden r.c.c. or c.c. or iron post and stacking the materials as directed etc. complete., dismantling brick / block masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc., removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete., providing and fixing jute kantan (tarat) screen to the scaffold-ing for external guniting as directed including removing the same after the work is over etc. complete., shifting of debris including loading unloading upto 25 km lead etc. as directed engineer in charge., total, minimum reserve price

Arc Welding Gun Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector