Latest arcing horn Tenders | Government arcing horn Tenders

State Government

CTN :40785985

10 Jul, 2025 5.40 Lacs

Chalakudy - Kerala

Tender For corrigendum : supply of ten or above seater tempo traveller (1500cc and above) with driver on contract basis for one year for the use of line maintenance section chalakudy under line maintenance sub division, chalakudy

Central Government/Public Sector

CTN :40686734

09 Jul, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of 40 w rms driver unit with line matching transformer for loud speaker, ip66 rated , 30w pa horn speaker with line matching transformer, ip66 rated , 25 w rms pa wall speaker, ahuja make model - ws- 6255tm , pa reflex horn. ahuja make model- wfb suitable for ahuja driver units

CTN :40922135

04 Jul, 2025 2.00 Lacs

Imphal - Manipur

Tender For supply of claw hammer 1lbs , line tester , brush 75 mm , screw driver 250mm , brush 25mm , pad lock 40 mm , goggle , tool metal , trowel scoop , pad lock 75 mm , ball pen hammer 500gm , plier side cutting 165mm , tool bag nylon , pad lock 7 lever , safety boot pvc , rubber safety hand gloves , safety halmet , wood cutting saw circular , elect drill machine , screw driver set , flat clod chisel , cast iron heavy duty pipe , hand held planner , water pump plier capacity 20 , round m3 eie screw driver , end cutter plier incer nipple , hand saw with plastic handle , t50 ball pen hammer , drill bit set , rain coat , richet hammer , screw driver set , trowel big

CTN :40908500

06 Jul, 2025 NA

Karad - Maharashtra

Tender For enquiry for providing 1 no. of diesel tata -sumo/bolero/utility vehicleequivalent or above with driver on hire basis for the office use of the addl. executive engineer,line-maintenance s/dn vishrambag under ehv o&m dn. sangli (sac code:- 996602).

CTN :40469202

03 Jul, 2025 NA

Budgam - Jammu And Kashmir

Tender For bid to ras tender for supply of chop saw machine make dewalt , gas cutter make esab , grinding goggle white , welding goggle black , nozzle cutting 1 oblique 64 , nozzle cutting 1 oblique 32 , nozzle cutting 1 oblique 16 , welding white glass shield screen , welding glass black , leather gloves , grinding wheel 100x6x16mm , cutting wheel 100x6 , hydrochloric acid , nausadar , cooper soldering chisel kavya , soldering lead 80 percent , 680 welding rod , gas welding aluminum rod and flux , ms welding rod 2 point 5mm , ms welding rod 3 point 15 mm , ms welding rod 4mm , painting brush 2 inch , painting brush 4 inch , painting brush 01 nos to 12 nos , m seal , anabond , thread tape , insulation tape , 12 nos benjo washer 01 pkt of 100 pcs , 15 nos benjo washer 01 pkt of 100 pcs , 17 nos benjo washer 01 pkt of 100 pcs , 19 nos benjo washer 01 pkt of 100 pcs , clamp hose 0 point 5 inch , clamp hose 1 inch , clamp hose 1 point 5 , feviquick , araldite 25 gm , nut and bolt 8x1 point 5mm , nut & bolt 10x1 point 5mm , nut & bolt 12x1 point 5mm , nut & bolt 14x1 point 5mm , steel screw 0 point 5 inch , steel screw 01 inch , steel screw 1 point 5 inch , water emery blade paper 180 , hacksaw blade , power hacksaw blade , dandrite , wheel balancing weight 10g 20g 50g , grease nipple 11mm , grease nipple 13mm , female thimble pkt of 100 nos , thimble 08mm pkt of 100 nos , thimble 10mm pkt of 100 nos , thimble 12mm pkt of 100 nos , thimble 16mm pkt of 100 nos , thimble 18mm pkt of 100 nos , pvc heat shrink sleeve 01mm , pvc heat shrink sleeve 02mm , pvc heat shrink sleeve 03mm , pvc heat shrink sleeve 04mm , pvc heat shrink sleeve 05mm , pvc heat shrink sleeve 06mm , pvc heat shrink sleeve 08mm , lt wire 1 sq mm auto cable 90 mtr roll , lt wire 2 sq mm auto cable , lt wire 4 sq mm auto cable , lt wire 0.75 sq mm auto cable , lt wire 6 sq mm auto cable , lt wire 8 sq mm auto cable , pvc harness tape black 19mmx60 mtr non adhesive , sleeve tape 25 mtr roll , cotton tape 25 mtr roll , ampper tape 25 mtr roll , battery terminal oblique positive heavy duty , battery cable 80 sq mm red 25 mtr roll , battery cable 80 sq mm black 25 mtr roll , battery cable 50 sq mm red 25 mtr roll , battery cable 50 sq mm black 25 mtr roll , auto blade fuse 05 amp , auto blade fuse 10 amp , auto blade fuse 15 amp , auto blade fuse 20 amp , auto blade fuse 25 amp , soldering wire 60 oblique 40 , head light blub 90 oblique 100 24v , single filament bulb 21w oblique 24v , double filament bulb 21w oblique 24v , single filament bulb 10w oblique 24v , single filament bulb 3w oblique 24v , fog light hallogen bulb 55w oblique 12v , relay 4 pin 12v oblique 30 amp , 4st relay 24v , push batton switch , toggle switch , fog light halogen bulb 55 oblique 21v , head light bulb 12v , assy tail lamp lh , bulb 12v , socket set 46 pcs 1 oblique 4 inch , screw driver set taparia , screw driver flat 150mm taparia , screw driver star 300mm taparia , screw driver star 150mm taparia , line tester taparia , allen key set bosch oblique taparia , ups battery 12v 7 point 5 ah make zebronics , digital wall clock having tempreture display feature

CTN :40556113

02 Jul, 2025 NA

Auraiya - Uttar Pradesh

Tender For corrigendum : supply of switch proximity detector single channel dualoutput with phase reversal and line fault detection specification as per annexure b1 , switch proximity detector two channel single output for each channel specification as per annexure b2 , smart transmitter repeater 420ma hart specification as per annexure b3 , signal splitter nonintrinsically safe applications specification as per annexure b4 , ai barriers with dual op with hart compatibility at both ends specification as per annexure b5 , ai barriers for plc smart transmitter power supply output current sink specification as per annexure b6 , smart transmitter power supply dual output 4 ma 20 ma output current sink specification as per annexure b7 , current voltage driver specification as per annexure b8 , voltage repeater vibration transducer interface specification as per annexure b9 , resistance isolator specification as per annexure b10 , hart multiplexers specification as per annexure b11 , pulse isolator specification as per annexure b12 , frequency converter with trip values acdc supply voltage specification as per annexure b13 , general purpose trip amplifier input 420 ma15 vdc output two relay op and one 420 ma op specification as per annexure b14 , switch operated relay 2 channel is output specification as per annexure b15 , general purpose trip amplifier input 420 ma15 vdc output two relay op specification as per annexure b16 , do barriers for plc specification as per annexure b17 , repeater power supply 420ma hart 2 or 3 wire transmitters smart transmitter intrinsic safety applications specification as per annexure b18 bid number/ & ( * ) : gem/2025/b/6290918 dated/ + : 31-05-2025 bid document/ 3 3 1 / 17

CTN :40903248

21 Jul, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of cross linked high molecular weight sodium hyaluronate for intra articular viscosupplementation 30 50 mg in pfs of 2 6 ml , total knee replacement modular posterio stabilised cr for components see appx , total knee replacement modular posterio stabilised high flex for components see appx , aquacel ag surgical 9 cm x 30 cm x 3 point 5 in x 12 in , locking distal humerus dual plate system with variable locking opton with plus 150 off axis angulation as lateral plate with and without lateral support available , synthetic non absorbable nylon suture size 1 length 18 inch reverse cutting half circle 48 mm needle , 4 point 5 5 mm locking head screw self tapping hexagonal head recess dia point len 26 to 95mm in increments of 5mm ti tan with compatable screw driver , 4 point 5 5 point 0 mm broad lc lcp with combihole for cortical and locking screw with 08 cortical and 04 locking screws titanium tan 7 8 9 10 11 12 14 holes , 4 point 9 mm locking bolts ti tan compatible with afn etn and pfna point 30 mm to 90 mm 5mm increments , a non absorbable sterile synthetic smooth flat suture width 2 mm tape type composed of ultra high molecular weight polethylene meeting of tendon with the bone , adjustable loop suspension device with button sterile ti , afn lateral femoral anatomical nail with distal slot and end cap left sterile tripple layered pack titanium tan 9mm 12mm dia x 340 440 mm length with , all inside meniscus repair device with depth gauge at the end of cannula and two needles with small peek implants with 2 0 fibrewire looped between two implants , cling drape sterile 2 meters , demineralised bone matrix with cancellous bone chips in collagen carrier of equine cortical bone in paste form loaded in a cut of syringe 10cc , disposable suture passer 45 sterile left , disposable suture passer 45 sterile right , disposable trocar set dia point 6 point 5x 70cm sterile , disposable trocar set dia point 8 point 5x 70cm sterile , fiber wire with needle multi color size 2 sterile , graft passing pin with eye hole beath pin drill tip dia point 2 point 4 x 355mm len point , guide wire 2 point 5mm dia x 22 cm , high performance orthopaedic operating gown sterile waterproof wrap around type sealed at seams and not stitched low lint fabric gsm 43 or higher pe reinforced at front and at sleeves , high viscosity bone cement with antibiotic 40gm , hydroxyapetite granules , joint irrigation fluid 3lts in collapsible packs normal saline , knee arthroscopy drape 90 in x 124in sms fabric with fluid collection pouch certified aami l 4 compliance , medium viscosity bone cement with antibiotic 40gm , non absorbant synthetic cotton roll 10cm width x 3 mtr , polybutylate coated braided polyester size 5 1 2 circle taper cut 45 mm single needle sterile foil with single thread , shoulder arthroscopy drape 160 in x 102 in attached fluid collection pouch hook and loop tube and line ce certified aami l 4 compliance , single loaded biocomposite suture anchor peek pldla material preloaded with fibre wire dia 2 point 8 mm 3 point 0mm 5mm sterile , ss wire rolls 18 20 22 gauge , suture disk tibial base plate sterile ti tan sterile pack , synthetic recrystallized hemihydrate calcium sulphate kit to prepare antibiotic impregnated resorbable pellets for delivery of antibiotics locally , titanium elastic nail system dia point 1 point 5 2 point 0 2 point 5 3 3 point 5 4 mm x 400mm , transparent adhesive polyurethane incise drape large with antiglare surface medicated , tricalcium phosphate granules , u drape with sms fabric and dimension 76 in x 120 in 4 in x 40in split tube holders 1 point 5in adhesive tape ce certified aami l 4 compliance , unilateral knee drape set make of impermeable control plus fabric with triple layer waterproof trolley cover of sizex 308 appx one knee o drape with reinforced zone , vertical isolation drape with drape size 90x126 229cmx320cm clear film adhesive incise pouch with suction port ce certified aamil 4 compliance , wire kirschner w

Central Government/Public Sector

CTN :40902674

21 Jul, 2025 38.9 Thousand

Bangalore - Karnataka

Tender For tender for supply of ic , cmos octal bus transceiver , 20 pin tssop package (sot360-1) , -40 to +125 deg. c , ic top switch-hx family enhanced eco smart integrated off-line switcher. temp -40 deg c to 150 deg c.pkg esip-7c , photo transistor opto coupler high density 4pin dip pkg. temp- -55 to 125deg.c , ic opto isolator triac driver device 6pin dip temp -40 to +85 deg.c , ic linear adjustable shunt regulators sop-8 package. , ic linear low power dual.operational.amplifier so-8 pkg.

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

Central Government/Public Sector

CTN :40917770

21 Jul, 2025 NA

Kalyan - Maharashtra

Tender For supply of arcing horn to m/s. adtranz's pt.no. s2327/s2531, drg.no. am-304070 p1 or m/s. aal pt. no. g2531, spare for contact system compl of tap changer type no. 32. [ warranty p eriod: 30 months after the date of delivery ]

Arcing Horn Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector