Latest arial bunch cable Tenders | Government arial bunch cable Tenders

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43472458

21 Jan, 2026 9.80 Lacs

Sehore - Madhya Pradesh

Tender For annual tender for material supply for different pwd work at municipal council kothri - annual tender for material supply for different pwd work at municipal council kothri, sand ( ), 20 mm crussed stone ( ), cement bag (opc) isi mark, cement bag (ppc) isi mark, np3 class pipe 300mm, np3 class pipe 450mm, np3 class pipe 600mm, np4 class pipe 1000mm, pre cast boundry wall, barbed wire, gi square mesh, rcc pole, m.s. (mid steel) hollow pile, steel work riveted,welded or bolded, galvanised iron (gi) sheet 0.8mm, pvc pipe 4in 4kg/cm2, pvc pipe 6in 4kg/cm2, pvc pipe 8in 4kg/cm2, pvc pipe 10in 4kg/cm2

Central Government And Public Sector

CTN :43497574

29 Jan, 2026 28.06 Crore

Kudankulam - Tamil Nadu

Tender For construction of physical protection system (pps) with welded wire mesh fencing and miscellaneous civil works at kknpp-3 and 4

CTN :43369467

12 Jan, 2026 NA

Cachar - Assam

Tender For corrigendum : supply of gabian box e e - gabion unit basket mesh type 10x12 size 1x1x1 as per specification given in atc , gabion unit basket mesh type 10x12 size 1 point 5x1x1 with separator as per specification given in atc , gabion unit basket mesh type 10x12 size 1 point 5x1x2 with separator as per specification given in atc , gabion basket size 2x1x1 mtr as per specification given in atc , shuttering plate size 1x1 mtr with ms sheet 3 point 15 mm thick welded on angle frame of size 1x 1 mtr size of angle 50x50x5mm as per specification given in atc , shuttering plate size 1x 0 point 50 mtr with ms sheet 3 point 15 mm thick welded on angle frame of size 1 x 1 mtr size of angle 50x50x5mm as per specification given in atc , ms pipe 48 point 3 mm dia 6 mtr long for shuttering as per specification given in atc , right angle coupler for jointer ms pipe 48 point 3 mm dia clapping the ms pipe as per specification given in atc , swiwel coupler as per specification given in atc , binding wire 22 swg black as per specification given in atc , plywood waterproof 8 feet x4 feet x12 mm

Trust

CTN :43460366

15 Jan, 2026 NA

Katra - Jammu And Kashmir

Tender For request for inviting quotations for concertina wire 2 ft dia and welded mesh 4 x 50 ft

State Government

CTN :43117877

19 Jan, 2026 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43419670

12 Jan, 2026 NA

Gurdaspur - Punjab

Tender For supply of hesco bestion c c -portable quick erectable protective wall baskets, , galvanized welded mesh frame 2 cell per set , basket frame mesh size 76. 5 mm x 76. 5 mm , mesh frame edge will be spiral hinged through 20mm dia spiral made of 4mm dia galvanized stretchable wire for joining to ensure easy folding and unfolding and 2 feet in length , geotextile cloth will be placed inside the cell and stitched in shape of a basket of size 4ftx2ftx4ft lxbxh should be powder coated with coating thickness 150 microns

CTN :43401973

21 Jan, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of welded steel wire fabric/ mesh for general use to spech. is 4948 of 1974 to size: 24 gauge x 16 mesh

CTN :43343712

16 Jan, 2026 NA

Cachar - Assam

Tender For supply of gabion unit basket mesh type 10x12 size 1x1x1 as per specification given in atc , gabion unit basket mesh type 10x12 size 1 point 5x1x1 with separator as per specification given in atc , gabion unit basket mesh type 10x12 size 1 point 5x1x2 with separator as per specification given in atc , gabion basket size 2x1x1 mtr as per specification given in atc , shuttering plate size 1x1 mtr with ms sheet 3 point 15 mm thick welded on angle frame of size 1x 1 mtr size of angle 50x50x5mm as per specification given in atc , shuttering plate size 1x 0 point 50 mtr with ms sheet 3 point 15 mm thick welded on angle frame of size 1 x 1 mtr size of angle 50x50x5mm as per specification given in atc , ms pipe 48 point 3 mm dia 6 mtr long for shuttering as per specification given in atc , right angle coupler for jointer ms pipe 48 point 3 mm dia clapping the ms pipe as per specification given in atc , swiwel coupler as per specification given in atc , binding wire 22 swg black as per specification given in atc , plywood waterproof 8 feet x4 feet x12 mm

Arial Bunch Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Trust

State Government