Latest arm bolt Tenders | Government arm bolt Tenders

corporations/Associations/Others

CTN :45726169

15 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of suspension parts - supply of suspension parts, spherlastics bush tvs / wheels india make-meriter620000000063, boltm20x2.5x130, radius rod axle bracket tvs / wheels india make620000001013 / 620/1013 / 620000002198, spherlasticbushtvs / wheels india make-meriter 620000000790s / 620000000790, rubber bellow big tvs make/ wheels india 1r1k-420-300 / w010950m545 / fgw010950m545 / 62000001387, boltm16x2x100 / 625000020069, levelling valve major assy lh277632400129, spherlastic bush tvs / wheels india make-meriter620000000539, anti roll bar assy620000100338 / 620/338, 12" steel clamp pl620000000449, radius rod tvs / wheels india make 620000000982, spring hanger bracket front550732103706, hex nut1 ( m10x1 )12052399015 / m10x1, mr split bush assytvs / wheels india make-meriter620000000704, hanger link assy tvs / wheels india make 620000100337 / 620/100337, screw (m12x1.75x25) 278618999917 / 3901249 / 625000020149, wheel nut m22x2.5257540100110 / 263140100107, camshaft lh288042107901, set screw coller (third arm bolt) 257342106719 / m12800-0200257342108001 / m16x1.5x139 /, u clamp550732504220, compoand link bracket tvs / wheels india make lh 620000000929, steel clamp plate tvs / wheels india make620000000450, ful crum pin288042106701, axle bolt581735608001, u bolt tvs / wheels india make 278032404201 / m24x1.5x378 / 620000001009, ny lock nut for axle stud m12x1.5din934.5 / 12140701201 / 918123110 / l3621218, spacer tube266835608603, parller link support bkt tvs / wheels india make620000061371, parller link bkt lh tvs / wheels india make620000061370, parller link support bkt rh tvs / wheels india make620000061380, bolt m14x1.5x50625000020049, circlip257342104303, rear levevingbkt tvs / wheels india make620000061494, threaded ring266835306501, axle nut12056699023 / m12x1.5din 934.5 / l3021218 / 911123210, coller bolt m16x1.5x182, housing plate (balancing plate)n.p.n, spring hanger bracket550732403710, hex nutm16x1.5 12052396067, 6mm nylone pipe 1mtr tvs / wheels india make620000000286, rubber bush550732807504, male conector tvs / wheels india makem12x1.5 620000001140, circlip cam end288042104302, hard washer tvs / wheels india make625000230029, castle nut m24x1.05din957, coller boltm16x1.5x143 / a01956020-0200, sleeve derlin264142108602, castle nut m12x1.5 / 12102096027, male elbow tvs / wheels india make620000001144, hex nut with collerm16x1.5 550532506501, rubber pad257341307501, rubber connector tvs / wheels india make 620000000287 / 620000000280, screw tvs / wheels india make620000001447, hex screw tvs / wheels india make 625000020179 / m20x2.5x55, rubber bush550732807501, wheel ball w/n w424020071, lock washerc20din7436, spacer ring3223530352, nylock nut (938)m12x1.75, castle nut m18x1.5din937.5 / 257446006502 / 12102801080, rubber cen.bre.honey comb257341307505, castle nut (fr hub check nut) m32x1.05din937.5 / 12102299068 / m32x1.05x941, hex bolt m14x1.5x7011064114621 / m14x1.5x70, castle nutm14x1.5din935 / 12102001409, repair kit for leveling valvetvs / wheels india make620000100205, leveling valvetvs / wheels india make620000100413, hex bolt tvs / wheels india makem16 x 2 x 130mm 625000020078 / 625000020070, hex nylock nut625000140017 / m24x1.5, bump stoptvs / wheels india make620000000639, hanger linktvs / wheels india make620000001474, rubber connectertvs / wheels india make620000100207, nut tvs / wheels india make m16x1.5 625000140040, stud tvs / wheels india make620000000199, bolt hex tvs / wheels india make 625000020119 / m20x2.5x100, parller link lh tvs / wheels india make 620000100029, parller rod assy tvs / wheels india make620000100159, cow horn major assy lh tvs / wheels india make277832400152, cow horn doweltvs / wheels india make 620000000928, shock absorber tvs / wheels india make gabrial/ motherson620000000560, gasket carrier taper pivot w/o spigot tvs / wheels india make257635115302, taper pivot w/o spigot tvs / wheels india make620000000690, m16 spring washer tvs / wheels india make625000230006, boltm10x1.

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45739421

09 Jul, 2026 2.77 Lacs

Kamrup - Assam

Tender For supply of hi mast light , led light 100watt ip 65 , hi mast power panel , nut bolt with base plate , civil work foundation making and installation chagres

CTN :45738664

14 Jul, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of 1.5 sqmm mm copper wire as per relevant is and as approved , 16 amp socket as per isi marked , 16 amp sp mcb conforming to is spec , 16 amp switch as per isi marked , 2.5 sqmm copper wire as per relevant is and as approved , 20 amp switch as per isi marked , 3 way modular as per isi marked , 32 amp double pole mcb as approved , 4 module as per isi marked , 4 sqmm twin core copper wire as per relevant is and approved make , 4 way module as per isi marked , 6 amp single pole mcb as approved , 6 amp socket as per isi marked , 6 amp switch as per isi marked , 6 way modular as per isi marked , 6 way module inner as per approved sample , 8 mm wire as per sample approved , 8 way mcb box as per sample approved , 8 way modular as per isi marked , 8 way module inner as per approved sample , aggregate 20mm as per is spec , balcha spade as per isi marked , base plate 6 ft x 6 ft conforming to is spec , black screw as per sample approved , blender , brick red conforming to relevant isi marked and as per sample , ceiling light 15 w as per isi marked and as per sample , cgi sheet 12 ft long x3.5mm thick as per sample approved , cgi sheet 15 ft long x 3.5mm thick conforming to is spec and as per sample approved , conduct pipe 6 ft long as per is spec , cutter blade 14 inch , dhaga or thread , exhaust fan 300mm sweep black and as per isi marked , folted pvc as per relevant isi marked and as per sample approved , foundation bolt 12mmx40mm as per sample approved , gazz 10 ft , hexa blade , hollow blocks of size 400x400m , hook nail as per approved make , inner frame tuffen as per sample approved , interlocking tiles as per sample approved , marble granite black as per sample approved , nail teen as per approved make , nails 2 inch long as per isi marks , natural sand as per is 383 and as approved , nut bolt as per sample approved , paint brush 4 inch , ply wood 12 mm thick 8 ft long , poly wire 1mm single core copper as per isi marked , poly wire 2.5mm sqmm two core copper wire , poly wire 4mm sqmm two core cas per isi marked , pvc box as per sample approved , pvc ceiling as per relevant isi marked and as per sample approved , red oxide , saphire pvc as per relevant isi marked and as per sample approved , scatling 10 ft lonmg 6.5x6.5 , scatling 3.5 ft x 3.5 ft of 10 ft long , sd screw 1.5 ft long , sd screw 4inch , slide tuffened door of size 7ft x 8ft as sample approved , sliding window as approved , small frame as per sample approved , stainless steel pipe 3 ft x1.5 ft as per is spec , stainless steel pipe 4 ft x4ft , stainless steel pipe 2.5 ft x1.5 ft as per sample approved , stainless steel pipe 4 ft x 2ft , steel acp sheet as per relevant isi marked , strip roll as per sample approved , tape roll , tile 2 ft x 2ft as per sample approved , turpentine oil , wall fan 450mm sweep as per sample approved , welding rod , white cement , wooden blade 4 inch as per sample approved , wooden door as per sample approved , wooden door frame as per isi marked and as per sampe approved

State Government

CTN :45701236

02 Jul, 2026 NA

Noida - Uttar Pradesh

Tender For supply, installation. testing and commissioning of 4.00 mtr. height decorative pole made of square pipe of 150x150 mm ms make cnc laser cut of 11 50 mm with customized and logo provide by department along with ip 65 led module with 40 watt in cnc cut pipe and on top and led ip 65 of 70 watt & back side led 30 watt including electrical accessories mcb link bar and netral link back side sheet. pipe size- 150x150 mm, base plate size- 300x300x12 mm (70 watt front light and 30 watt back light) (including electrical accessories) (including foundation bolt- 20x700x4 nos.)

Central Government/Public Sector

CTN :45291765

30 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of foundation bolt (m36 x 1000lg. ) to drg. no- 24021040023 var 00, rev 11. , foundation bolt (m42 x 1200lg. ) to drg. no-34021041727, var 00, rev 01

Central Government/Public Sector

CTN :45725815

27 Jul, 2026 NA

Nungambakkam - Tamil Nadu

Tender For supply of 5 meter length g.i octagonal pole as per dimension top dia -70mm bottom dia-130mm section -1(section length -5000 mm ) thick -3mm base plate -200x200x12mm with four foundation boltof size m16x600 and double arm bracket 1000mm long, using 12 mm dia ss bolts of suitable length, foundation bolt type j-type, suitable foundation bolts - 4 nos, nuts per bolt - 3nos, washers - 3 nos., instruction manual,. door opening: 500 mm height from baseplate, size: 100 mm x 500 mm with gasket. with test reports, confirming to to is 2713 (for steel tubular/octagonal poles), is 875 (part 3) for wind load calculations, and is 2629 / is 4759 for hot-dip galvanizing. make:- techno tower, bajaj, surya, vipan,jindal, utkarsh or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45704188

06 Jul, 2026 NA

Baramulla - Jammu And Kashmir

Tender For supply of front disc pad , rear disc pad , drop link rear , wiper blade with arm , wiper arm bolt , door lock assy , torsion bar bush rear , shocker bush

CTN :45712256

13 Jul, 2026 NA

Jaunpur - Uttar Pradesh

Tender For providing of custom bid for services - supply and fixing of 7 mtr gi octagonal pole of approved make having 3 mm thikness in 1 2 4 rcc foundation bolt including the cost of foundation excavation and back filling and required tp complete in all respect

CTN :45712273

13 Jul, 2026 NA

Jaunpur - Uttar Pradesh

Tender For providing of custom bid for services - supply and fixing 4 meter long heritage decorative ms tubular pole with decorative ci ring with golden paint on rcc foundation including the cost of foundation bolt excavation and back filling and required t p complete in a..

Arm Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector