Latest arm badge Tenders | Government arm badge Tenders

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

State Government

CTN :45442617

11 Jun, 2026 NA

Nadia - West Bengal

Tender For item rate e-quotation of mgnrega works - citizen information board for community work 3ft x 4ft for a complete layout, background and text colour mandatory information required to be written on the board., citizen information board for ibs work 2ft x 3ft for a complete layout, background and text colour mandatory information required to be written on the board., supply of 1st class picked bricks including loading unloading & stacking at different sites., supply of 1st class bricks including loading unloading & stacking at different sites., supply of 1st class brick bats including loading unloading & stacking at different sites.(size directed by eic), supply of silver sand including loading unloading & stacking at site., supply of sand(fine) including loading unloading & stacking at site., supply of sand(medium) including loading unloading & stacking at site., supply of sand(coarse) including loading unloading & stacking at site., supply of cement (isi mark) (ppc) including loading unloading & stacking at site., supply of 1st class bricks bats size- 40mm including loading unloading & stacking at different sites., supply of stone aggregrates ( single size ) 40mm nominal size including loading unloading & stacking at site. (pakur variety), supply of stone aggregrates ( single size ) 20mm nominal size including loading unloading & stacking at site. (pakur variety), supply of stone aggregrates ( single size ) 10mm nominal size including loading unloading & stacking at site. (pakur variety), supply of stone aggregrates ( single size ) 5.6mm nominal size including loading unloading & stacking at site. (pakur variety), supply of stone aggregrates 13.2 mm nominal size including loading unloading & stacking at site. (pakur variety), supply of stone aggregrates 11.2 mm nominal size including loading unloading & stacking at site. (pakur variety), jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., vibrator (needle type 40 mm), supply of tor steel/hysd/fe 415/fe 500/fe 500d tmt bars(jsw/jspl/shyam/ srmb/ssl/bmasl/electro steel) including loading unloading & stacking at site., nail, g.i. wire, bamboo (6.00 m. 100mm. dia), supply of first aid box including medicines (specified by pia) at site., shed of tarpolin (20ft x 20ft)

State Government

CTN :45447770

12 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of item - ultra sound therapy unit , digital diagnostic muscle stimulator (s.faradic/galvanic) , contrast bath unit , digital hand dynamometer , goniometer 180,360 digital , peg board round & square , grip excerciser , hand gym kit oard , power wave elastic hand exercise unit , wrist circumductor unit , bolstar with foam cover , heel excerciser , finger ladder wooden , physio-gym-ball 55" & 65" , weight cuff-500gm, ikg,2kg , medicine ball ikg & 2kg , balance board , t. pulley-shoulder excerciser , laveen rfa ante , self expandable wall stent , low profile balloon dilatation , catheter 8mm x 4 cm , pta balloon dilatation catheter , mono polar cutting loop 24 fr (olympus machine) , bipolar cutting loop (olympus machine) , thunder beat hand piece (lap) , hem lock clip gren (5 mm) , long sheath 7 fr , snare system , peripheral work horse balloon 14mm , peripheral work horse balloon 16mm , open enseal , harmonic hand piece , harmonic focus 17cm , laparoscopic enseal , disposable hoppers for use with the clear view coverslipper , elastometric infusion pump 275ml/hours , (storz compatable) bipolar cutting loop , (storz compatable) bipolar , coagulation ball , hfno cannula for bmc , hfno humidifier chamber (bmc) , hfno humidifier chamber adaptor (bmc) , hfno heated circuit (bmc) , endo g.i. stapler purple 45 , endo g.i. stapler green 60 , endo g.i. stapler green 45 , endo g.i. stapler blue 60 , haemlock clip applicator green 5mm (weck) , haemlock clip (weck) , haemlock clip green , haemlock clip purple , lap harmonic probe (36 cm) , lap harmonic hand piece cable , lap harmonic hand piece , respiratory filter for ventilator , esophageal metal stent partially covered , single used haemo clip , distal attachment cap , rotable clip fixing device 2300 mm for colonoscopy , rotable clip fixing device hx-110 lr ez clip, 1650mm/q 2.8 mm for endoscopy , d-fend water trap (compatible with dragger anaesthesia work station) , sample line for water trap , atraumatic safety trocar with , cannula 10mm , tromatic trochar with cannula 5mm , tooth grasper , ligation loader , lap aspiration needle , heavy metalic grasper , r.f. cannula +probe (145 mm) , harmonic focus 17 cm , harmonic hand piece , bite blocker , conventional rfa cannula 145 mm , interlocking detachable coil

CTN :45446648

15 Jun, 2026 NA

Theni - Tamil Nadu

Tender For refer tender notice - purchase of non consumable item in material testing lab for civil department - torsion testing machine (code e006)function: conducts torsion and twist tests on materials. such as metal wires, tubes, and sheetstorque measurement : pendulum dynamometer systemtorque application : geared motor through a gearboxtorque range : adjustablematerial tested :metal wires, tubes, sheet materialsfloor-mounted electromechanical type,230 v ac, 50 hz power supply,digital display, sand replacement test apparatus (or) core cutter devices(code e014)metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300 mm with 100 mm hole).another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits seamless steel cylinder with no sharp edges.common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products), total station with all accessories(code e022)leica flexline ts10 reflectorless total station angle accuracy: 1 5 (smaller values = higher precision). magnification: ~28x 30x optical zoom. distance range:with prism: 2,000 m 6,000 m+reflectorless: 600 m 2,000 m typical. battery backup: ~12 36 hrs field operation., rockwell cum brinell hardness testing machine with intentor set box(code e031)min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories:steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine

CTN :45430824

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of lab equipment - basic engineering lab materials, digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meterrange 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meterph range o to 14, resolution 0.01 ph, digital display, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, mortar with pestleporcelain/agate,gazed exterior, unglazed grinding surface.item weight 2290 gramsitem diameter 4 inches, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, sensitivity 20 a/div, resistance approx. 100 ohms., voltmeterdc voltmeter; range 0 10 v, analog , ammeter dc (0 - 2 amp), cdecade resistance box3 or 4 dials, range 0.1 to 100 or 1k , constantan/manganin wire coils., rheostathigh-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kitseries arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, meter bridgetype: 1 m length, with uniform wire (resistance wire)material: constantan or manganin (low temperature coefficient)scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection)range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v)

CTN :45454513

03 Jul, 2026 NA

Saran - Bihar

Tender For fire retardant 100 % cotton work wear with following specification, material:100% flame retardant cotton flame retardant treatment, style: jacket and pant (with reflective tape), weight: range of 350 to 450 gsm, colour: blue, closure: a heavy duty brass zipper extending form bottom to top of collar, button: metal, adjustment l button, stitching: lock-stitched with f.r thread, design: (i) jacket- (full sleeve, turn down collar, two chest pockets (left side & right side), pocket has protective flap with and covered metal button, front closing with flap type heavy duty metal zipper, quick releasepress buttons to be provided. (ii). trousers-(the trouser should be provided with two side pockets, metal zipper) standard tested according to en iso 11612: 2008 class a1 plus a2, b1, c1, e3 f1. make: podder trading, udyogi, hicare, leslico or equivalent. note - firm should supply advance sample for feel and appearance before bulk supply to consignee. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45437464

01 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of coloured glass (germany make) for eye protection for manual metal arc welding, colour- dark green, size :108x82x3mm, spec. bs:679/11 din. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45210728

12 Jun, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply of manual metal arc welding electrode, class-m5, type of coating : heavy as per specification irs : m-28/2020 and str : rdso mc str w 01 rev 03, code as per is: 5206/2013, size : 3.15 mm x 350 mm.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45453784

29 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of side bearer top for bcn wagon to rdso drg. no. wd-84014-s/7a alt.-6, item-3. spec. asper drg and material as per is:3885 pt-1 gr.4 (hardness 380-420 bhn). silico-manganese liners shall be marked for manufacturer initial and month and the year of manufactured by metal laser engraving in 6mm size and0.1 mm depth minimum. specification as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45422910

07 Jul, 2026 NA

Multi City - Multi State

Tender For relay, plug in type, style "ac led" all aspects, ac lamp proving relay unit with in-built current transformer type, slow release neutral line relay, 4f. 4b contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110v ac , led signal lamp rated at 15w confirmingto rdso spec. sts/e/relays/ ac lit led signal/ 09-2002, amd-1 brs: 941a, irs: s 34 & irs: s 23 (as applicable). the interlocking code for this unit shall be abdhk". [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 500 units per month , commencement time allowed -2 month ]

Arm Badge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government