Latest arm chair Tenders | Government arm chair Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :40123325

05 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of cantilever office chairs non-revolving and non-tilting chair with netted backrest with armrest. brand: exponse or gayaa model no. 68770 for o ms coach no. lwsczac 081513. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40109880

05 May, 2025 15.00 Lacs

Surat - Gujarat

Tender For providing, supplying & fixing of playing equipments, outdoorphysical fitness equipments (including one year free maintenance) & maintenance &repairing work of existing physical fitness equipments in various garden in sub zone- 2 &5 in south west(athwa) zone , surat. - air walker / swing walker / sky walker/length 800 mm x width 500 mm x height 1200 mm |40 nb galvanized pipe suspended over 80 nb galvanized up to minimum 40 micron tk.,uniformly poeder coated up to minimum 60 micron tkpipe main frame &foot rest| consisting of hdpe sheet fixed over zinc plate for corrosion resistance.the handle consist of 25 nb galvanized pipe fixed over 80 nb main frame for grip conforming to en1176:2008. all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment, aero rider/ rowing rider |length 800 mm x width 500 mm x height 1200 mmhdpe/lldpe roto molded seat hinged over frame made from 100nb galvanized pipe with powder coating of minimum 60 micron tk. handle support pipelinked to |seat via 25 nb galvanized pipe .the handle support pipe is pivoted over 100 nb support pipe with zinc plated squre tube for corrosion resistance .the handle pipe consists of grip conforming to en1176 :2008 .the handle pipe extended to connect foot grip via 4onb galvanized pipe. the seat rest over the 50 nb pipe fixed over the 100nb main fram pipe. all gi pipes are galvanized up to minimum 40 micron tk for corrosion resistance.all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment, hip twister/ waist twister length 600 mm x width 500 mm x height 1200 mm100 nb galvanized powder coated upto minimum 60 micron tk,pipe main frame with handle pipe fixed at the top. handle pipe consist of rubber grip conforming to en1176:2008 .the rotating disc made from hdpe/lldpe plastic is supported over 25 nb pipe bolted to main frame pipe .all gi pipes are galvanized up to minimum 40 micron tk. for corrosion resistance |all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment., elliptical cross trainer /working trainer/ovate stepper length 800 mm x width 500 mm x height 1350 mmpaired square tube with fo0t rest on each linked to 80nb galvanized main frame pipe with powder coated upto minimum 60 micron tk,the handle pipe consist of 25 nb galvanized rubber grip on top end hinged over 80 nb main fram the handle pipe extended to the square tube on both side with 40 nb galvanized up to minimum 40 micron tk. for corrosion resistance all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment., shoulder spinner/ big arm wheel / shoulder twirl ring dia. min. s00 mm x width 350 mm xheight 1200 mm 25 nb galvanized pipe bend to from ring& spokes consist of 20 nb that connects pipe ring & 40 nb connector pipe fixed to 100 nb main support galvanized pipe with powder coat thickness of minimum 60 microns. all gi pipes are galvanized up tominimum 40 micron tk. for corrosion resistance all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment.handle for rotating thering fixed over the pipe ring, fore arm spinner /small arm wheelring dia. min. 300 mm x width 500 mm x height 1200 mm25 nb galvanized pipe bend to from paired ring & spokes consistof 20 nb that connects pipe ring & 40 nb connector bend pipe fixed to 100 nb main support galvanized pipe with powder coat thickness of |minimum 60 microns. all gi pipes are galvanized up to minimum 40 micron tk. for corrosion resistance .all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment.handle for rotatingthe ring fixed over the pipe ring, leg extensionlength 800 mm x width 700 mm x height 1100 mm hdpe/lldpe seat with backrest fixed over 5onb galvanized pipe fixed over 10onb main supporting pipe the paired 25 nb pipe handle with rubber grip at the end is fixed over 40 nb pipe frame.the paired roller with rubber grip hinged and supported over 100 nb main frame wit

State Government

CTN :39960684

28 Apr, 2025 NA

Palghar - Maharashtra

Tender For corrigendum : district health officer invite e -tender for the supply of following instruments - district health officer invite e -tender for the supply of following instruments, air condition 1.5 ton split a/c 3-5 star, hospital bed with backrest with foam matress and safety

Central Government/Public Sector

CTN :40079495

24 Apr, 2025 NA

Multi City - Multi State

Tender For supply of foldable inspection seat and backrest with slider

Central Government/Public Sector

CTN :39835425

30 Apr, 2025 4.15 Crore

Pune - Maharashtra

Tender For corrigendum : supply of custom made furniture items - chair for seminar hall , 4 seater desk and bench integral for 2 nos 120 seater class room , 3 seater integral desk and bench for 60 seater 6 nos. class rooms , pvc armless chair , 6 seater i.e 3 plus 3 table for library , book shelf for library , reception table for library , bunk bed i.e. 2 tier , study table , 6 seater i.e. 3 plus 3 dining table , bain marie , wheel chairs

CTN :39984440

30 Apr, 2025 NA

Paschim Medinipur - West Bengal

Tender For supply of furniture articles-items - steel almirah two door with locker (78" x 34" x 18") 24 gauge - branded., steel almirah two door with locker (78" x 34" x 18") 24 gauge - local made non branded., steel almirah two door with out locker (78" x 34" x 18") 24 gauge - branded., steel almirah two door with out locker (78" x 34" x 18") 24 gauge - local made non branded., steel rack (72" x 35" x 15") with six shelves duly fixed with nut & bolts painted (18 gaze) - branded., steel rack (72" x 35" x 15") with six shelves duly fixed with nut & bolts painted (18 gaze) - local made non branded., steel rack (72" x 35" x 15") with four shelves duly fixed with nut & bolts painted (18 gaze) - branded., steel rack (72" x 35" x 15") with four shelves duly fixed with nut & bolts painted (18 gaze) - local made non branded., steel bench with backrest 03 (three) seater - branded., steel bench with backrest 04 (four)seater - local made non branded., steel file cabinet (6 x 3) with three swing door glass fitted painted 24 gauge - branded., steel file cabinet (6 x 3) with three swing door glass fitted painted 24 gauge - local made non branded., executive table for superior officer - branded., executive table for superior officer - local made non branded., full secretariat table with steel tabulbar frame (4.5 x 2.5) - branded., full secretariat table with steel tabulbar frame (4.5 x 2.5) - local made non branded., half secretariat table with steel tabulbar frame (4.5 x 2.5) - branded., half secretariat table with steel tabulbar frame (4.5 x 2.5) - local made non branded., composite computer table with provision for cpu, monitor, key board, printer, ups, floppy rack, scanner & drawers size (4.5 x 2.5) - branded., composite computer table with provision for cpu, monitor, key board, printer, ups, floppy rack, scanner & drawers size(4.5 x 2.5) - local made non branded., composite computer table with provision for cpu, monitor, key board, printer, ups, floppy rack, scanner & drawers size (2.5 x 1.5) - branded., composite computer table with provision for cpu, monitor, key board, printer, ups, floppy rack, scanner & drawers size (2.5 x 1.5) - local made non branded., wooden table (4.5 x 2.5) - branded., wooden table (4.5 x 2.5) - local made non branded., fiber table (4.5 x 2.5) - branded., fiber table (4.5 x 2.5) - local made non branded., wooden center table with 02 (two) glass shelves and designer pattern - branded., wooden center table with 02 (two) glass shelves and designer pattern - local made non branded., executive hidrolick revolving chair high back for superior officer - branded., executive hidrolick revolving chair high back for superior officer - local made non branded., executive hidrolick revolving chair low back for superior officer - branded., executive hidrolick revolving chair low back for superior officer - local made non branded., led desk chair - branded., led desk chair - local made non branded., led desk chair with writing pad - branded., led desk chair with writing pad - local made non branded., hidrolick revolving chair with handle for computer operator - branded., hidrolick revolving chair with handle for computer operator - local made non branded., wooden chair with handle - branded., wooden chair with handle - local made non branded., wooden chair with out handle - branded., wooden chair with out handle - local made non branded., wooden tool - branded., wooden tool - local made non branded., wooden bench with backrest for sitting 04 (four) person - branded., wooden bench with backrest for sitting 04 (four) person - local made non branded., wooden notice board - branded., wooden notice board - local made non branded., fiber ornate chair with cushion with handel - branded., fiber ornate chair with cushion with handel - local made non branded., molded fiber chair with handle - branded., molded fiber chair with handle - local made non branded., molded fiber chair with out handle - branded., molded fi

Central Government/Public Sector

CTN :40058389

25 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of catch arrangement with lock for backrest lock in lhb 1st class ac coach (cai no. a-2024/14) .material required as per annexure i [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40028393

05 May, 2025 NA

Guntur - Andhra Pradesh

Tender For supply of four (4) -seater stainless steel public place seating chair of ss304, with arm and backrest, without cushion, best quality. overall minimum length, depth, height (in mm): 1800 x 400 x 900, type of s eating: integrated seat and backrest, style: with arm and backrest, seating capacity (nos): 4, material of main frame, material of seat and backrest, material of arms, material of legs: ss 304, minimum thickness of material of main frame in mm: 2.2. minimum thickness of material of arms in mm: 2.2, minimum thickn ess of material of seat and backrest (mm): 2.0 mm all m s strucure finish: powder coated and chrome plat ed, standards to be met: international standard for publicseating : bifma x 5 dot 4 or equvalent [ warrant y period: 30 months after the date of delivery ]

Arm Chair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors