Latest arm insulator Tenders | Government arm insulator Tenders

State Government

CTN :45713543

06 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric material at gp kirmiti bharkas 26/27 tah.hingna dist. nagpur - electric items :, led bulb 18w philips/surya/cromptan, led bulb 30w philips/surya/cromptan, ledbulb 50w philips/surya/cromptan, 1/18 aluminium wire i.s.i. 1.0, 1/18 copper wire i.s.i. 1.5, 3/20 copper wire i.s.i. 2.5, 7/20 copper wire i.s.i. 2.5, led st. light fitting 24 w philips/surya/cromptan / bajaj, led st. light fitting 36 w philips/surya/cromptan / bajaj, led st. light fitting 50 w philips/surya/cromptan / bajaj, led st. light fitting 25 w astha/power, led st. light fitting 36 w astha/power, led st. light fitting 45 w astha/power, cable i.s.i. 2 core, cable i.s.i. 4 core, insulation tape i.s.i., main switch 16 amp single phase, main switch 32 amp single phase, main switch 32 amp three phase, main switch 64 amp three phase, led high must light ft. 100w philips/surya/cromptan / bajaj, led high must light ft. 150w philips/surya/cromptan / bajaj, led st. light braket, braket pipe 3/4, braket pipe 1/4, mcb box, alluminium cable (service wire) 2 core, alluminium cable (service wire) 3 core, kit kat 16 amp, kit kat 32 amp, kit kat 64 amp, fitting patti / pipe, electrical switch board 6 mm, electrical switch board 12 mm, led bulb 20w philips/surya/cromptan / bajaj, bulb holder, 2.5 mm service wire, led tube light 20w, mcb anchor / havells, elcb anchor / havells, celling fan

Central Government/Public Sector

CTN :45736389

09 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For isi marked energy efficient bee 5star rated bldc ceiling fan 1200mm sweep with 3 blades suitable to operate in 230v, 50hz ac supply with 2 canopies and 300mm down rod. 1. power consumption (maximum): 28w 2. voltage range: 165 to 285 volts. 3.air delivery (minimum): 235cum/min 4. replacement warranty (minimum): 5 years 5. power factor (minimum): 0.9 6. total harmonic distortion (maximum): 10% 7. rated service value (in m3/min/watt): 8.4 8. special features: ir remote 9. availability of performance and type test report from govt. lab. nabl/ilac: as per is:374:2019 or latest. 10. the fan should comply to is: 374:2019 or latest. 11. blade thickness: 1.1mm 12. blade material: aluminium 13. bearing: double ball bearing 14. shank thickness (min): 2mm 15. shackle thickness (min): 2mm 16. rated speed (rpm): 350 rpm 17. copper winding insulation class: class f 18. preferred colour: white/brown/cream/ivory 19. preferred makes: atomberg, havells, crompton, orient, activa, bajaj warranty: 5 years, is specifications (a) is: 616/2010 for safety requirement for electronic equipment. (b) is: 374/2019 performance test for air delivery as per cl. no 10.3 of specification. test report: the firm has to submit type test report from government accredited test labs like nabl/cpri etc. [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45408269

02 Jul, 2026 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of turbine thermal insulation & application service , piping thermal insulation

Central Government / Public Sector

CTN :45727721

20 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of porcelain stay arm insulator (ri 6000-2) (1050mm cd) as per rdsospecification no. ti/spc/ohe/ins/0071 (04/2022) or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45712417

20 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For providing of repair and overhauling service - insulation works in boilers of tps-ii expansion; as per scope of work; yes; buyer premises

CTN :45727067

09 Jul, 2026 1.00 Lacs

Barmer - Rajasthan

Tender For supply of led bulb 12w , led tube light 20w , bed switch , pendent holder , flexible wire roll , led flood light 100w , led flood light 50w , hammer drill bit 6mm , hammer drill bit 8mm , hammer drill bit 12mm , insulation tape , 2 core service cable 10mm , hss r drill bit set , cable clip 8mm , cable clip 10mm

CTN :45467800

01 Jul, 2026 NA

Lohit - Arunachal Pradesh

Tender For bid to ras supply of wooden scantling 3 inch x 2 inch x 12 feet long , wooden scantling 3 inch x 3 inch x 12 feet long , wooden beading 2 inch x 0.5 inch x 12 feet long , plain toughened glass 300 millimeter size 4 feet x 4 feet x 4 mm , gi wire 3 mm , pu glossy , pu sealer , pu thinner , wire mesh 4 feet width 15 m long , wire nail 4 inch , wire nail 5 inch , pannel pin 1 inch , pannel pin 1.5 inch , dendrite adhesive , looking mirror with frame 18 inch x 24 inch x 3mm thickness , glass cutter , circular blade 10 inch for wood cutter machine , sharpner stone , king machine planner blade 12 inch long , king machine hole bit 12 mm , 5 inch sanding disc pad , thinner , paint po red , paint sky blue , wood primer , paint white , paint black , og paint , paint smoke grey , paint golden brown , red oxide , floor guard exterior paint colour brick red , distemper white , wire brush , painting brush 5 inch , painting brush 4 inch , painting brush 3 inch , lime , geru , fevicol ddl , bib cock steel 15mm , gi gate valve 25 mm , gi gate valve15 mm , bib cock plastic 15 mm , m seal , stop cock steel 15 mm , teflon tap 1 by 2 inch x 10 mtr , gi socket 15mm , gi socket 25 mm , gi bend 1 inch , gi elbow 1 inch , gi elbow 15mm , gi nipple 15mm x 2 inch long , gi nipple 25mm x 4 inch long , gi nipple 15mm x 4 inch long , gi nipple 25mm x 2 inch long , connection pipe for geyser , health faucet , waste pipe for urinal , waste pipe for kitchen sink , gi tee 15 mm , gi pipe 15 mm 6mtr long , gi pipe 25 mm 6 mtr long , wc european type complete set , ewc seat cover , hexa blade , wash basin coupling , floor jaali , gi union 15 mm , gi union 25 mm , led bulb 18 watt , led bulb 12 watt , pvc insulated copper wire single core 1.0 sqmm 90 mtr roll , pvc insulated copper wire single core 1.5 sqmm 90 mtr roll , pvc insulated copper wire single core 0.75 sqmm 90 mtr roll , pvc insulated copper wire single core 2.5 sqmm 90 mtr roll , service cable aluminium 2 core 10 sqmm 100 m roll , led tube light complete set 20 watt , switch socket combined 16 amp , mcb 63 amp 2 pole , mcb 32 amp 2 pole , insulation tape 25 mtr , fan capacitor , fan regulator , fuse kit kat 63 amp , socket 6 amp , switch 6 amp , ceiling fan 1200mm , casing capping 1.5 inch x 7 feet , exhust fan 300 mm , aluminium service wire 4 sqmm 100m roll , conc drill bit 6 mm , conc drill bit 4 mm , wall putty , flexible gardening pipe 1 inch 30 mtr long , electric planner machine , ac sheet 4 feet x 4 feet , copper earthing plate size 2 feet x 2 feet x 3mm with nut bolt , copper strip size 3mm x 15mm x 8 feet , tiles 300mm x 300 mm , clothes hanger steel 2 feet long , float valve 1 feet complete set , barbed wire 2 pt 5 to 4 mm , 3 pin plugtop 6 amp , 3 pin plugtop 16 amp , curtain rod 1 inch , white washing brush 8 inch long , gi reducer 25mm by 15mm

CTN :45712028

07 Jul, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; work of lagging cladding for season 2026 27; service provider - thermal insulation by providing light raising bonded slap (lrb slap) density 100 kgs/m3 & aluminium sheet 22swg g.i. wire 20 swg fixing of g.i. screw pan head 8x 13mm by grooving all joint with necessary overlapetc job involve the work of cleaning of surface area if required for insulation different station/ equipment with material rates as per isi norms

Central Government/Public Sector

CTN :45697300

16 Jul, 2026 20.00 Lacs

Akhnoor - Jammu And Kashmir

Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po

Arm Insulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector