Latest armour plate Tenders | Government armour plate Tenders

Central Government/Public Sector

CTN :45116876

18 May, 2026 NA

Hubli - Karnataka

Tender For supply of m.s. sliding door bolt, plate type fig 1b with alternate hasp design, chromium plated, size 250 mm to is:281/2009, table 1. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45109255

22 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of pway scrap - scrap point & xing material like tongue rail ,check rail , rail flange, glued joint broken g/j cut pieces,glued joint 60 kg,g/j f/plate 60 & 52 kg,broken sej cut pieces,sej stock and t/r, wing rail,cut check rail,various size, ,cut pieces of tongue rail ,gate check rail various size, rail 90,87,82,75,89 rail 1 mtr below pieces,rail 52 kg & 60 kg 1 mtr below pieces, guard rail 52 kg,ms tie bar, ms angle other p.way material like.

Central Government/Public Sector

CTN :45109260

22 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of pway scrap - m.s. melting scrap - key 100 lbs,fish plate,two way key, fitting for cms xing , gauge tie plate,cented bearing plate,erc,liner,sej brecket,jn. fish plate,slide chair,m.s. cotters,plate screw,bolt,m.s. tie bar,joggle plate etc.

Central Government/Public Sector

CTN :45109265

22 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of pway scrap - melting scrap - bearing plate, stracher bar , fitting for cms xing , fish plate of various size , gauge tie plate , erc, joggle plate , liner, hook bolt , fitting for switch , sej angle, sej bracket , crip angular, m.s. block,jn. fish plate, slide chair, m.s. cotters, tie bar, plate screw,round spike,dog spike, dog spike , bolt, etc

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

corporations/Associations/Others

CTN :45105687

15 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of brass scrap (fired case),plastic,steel (ms / armour plates),steel (fired case)

Central Government / Public Sector

CTN :45109340

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of pway scrap - ms scrap- 48.320 mt-delivery on actual weighment basis. lot no. 5405 26 05 02 gtl gtl ms ap available with sse p w bg-gtl. scrap cond and u/s released ms scrap consisting of:- 1)ms liners t-3740¿44,325 nos---10.195 mts,2) bolts & nuts off size---593 nos---0.709 mts 3)glued joints 60kg pices u/s593---92 nos---11.040 mts,4)glued joints 52kg pices u/s---35---nos¿03.640 mts,5) plate screw t-3915---844 nos---0.401 mts,6) slide chairs---24 nos---0.468 mts,7) m.s bearing plate of shorts---05 nos---0.293 mts,8)ms scrap (kgs) consisting of below 1 mtr rail pieces,check rail peices, ms boards, miscellaneous scrap ete.) ---06.709 mts,9) m.s. bracket t-6905---20---0.309 mts,10) m.s. bracket t-6906---24 nos---0.504 mts,11) m.s. bracket t-6907---08 nos---0.121 mts,12) m.s. bracket t-6908---08 nos---0.121 mts,13) m.s. bracket t-6932---36 nos---0.504 mts,14) m.s. bracket t-6933---36 nos---0.544 mts,15) m.s. bracket t-6934---72 nos---0.655 mts,16) gauge tie plate---01 nos---0.080 mts,17) 52kg fish plate plates---176 nos---02.746 mts,18) 52kg joggled fish plates---152 nos---02.903 mts,19 single coil spring washers---304 nos---0.015 mts,20) 60kg 1 meter long fish plates---133 nos---03.606 mts,21)60kg joggled fish plates---91 nos---01.820 mts,22) sej check rail---14 nos---0.938 mts total- 48.320 mts. (approx). available at inside of the sse/p.way/bg/gtl office compound guntakal. ss no. g/w/gtl/ms/bg/2026-27/06, dt.16.04.2026. sl no. 1 to 22 and stack no. 1 to 22. hsn code: 72042990 - gst 18%. note to the bidders 1) successful bidder is advised to pay bsv at the earliest and approach all the concerned witnessing officials immediately along with delivery point fixation letter for taking loading to avoid last minute rush and unforeseen circumstances 2) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.3) post auction no representation shall be entertained.4) for photos of this lot, kindly click on view lot image on bottom left side. 5) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description. 6) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 7) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 8) clubbing of the lots, what so ever, is not permitted for loading 9) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 10 railways does not guarantee for quality, quantity description etc.

Central Government / Public Sector

CTN :45117133

11 May, 2026 NA

Angul - Odisha

Tender For supply of two tubes type cutting torch cutogen-5 , suitable for oxy-acetylene/lpg gas with (i) nozzle : a-16(1/16) made up of copper, (ii) cutting capacity: up to 300 mm ms plate, (iii) torch length :approx. 450mm, (iv) angle head : 90 degree, (v) control knob: metallic material (vi) tubes : seamless twin pipes (vii) procured from oem or its authorized distributor only. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45095862

25 May, 2026 1.23 Lacs

Ahmedabad - Gujarat

Tender For annual rate contract for the supply of different mechanical items at raikhad store of water operation (e&m)-west department of amc -0 125 mm dia. x 90o cidf short bend., 125 mm dia. cidf sluice valve as per tender document., 125 mm dia 1.0 mt. length cidf ‘b’ class ci pipe as per, tender document., 125 mm dia.cidf dpcv (nrv), 125 mm cidf tee with blind flange, required connecting nut, bolts, washer & gasket, ms bore-plate in split assembley, m.s. clamp for 125 mm dia. column pipe, 8” one side flange bore – drop piece (as per drawing), 100 mm dia. x 90o cidf short bend., 100 mm dia.cidf sluice valve as per tender document., 100 mm dia 1.0 mt. length cidf ‘b’ class ci pipe as per, tender document., 100 mm dia.cidf dpcv, 100 mm cidf tee with blind flange, require connecting nut, bolts, washer & gasket, ms bore-plate in split assembly, m.s. clamp for 100 mm dia column pipe, ltmd double door section pillars with 315amp switch

Central Government And Public Sector

CTN :45117604

19 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of set of clamps for fixing secondary vertical dampers for wag-9 locos as per rdso drg. no. skel-5053 (alt-0) & skel-5054 (alt-0). set consists of following 05 items. set details as follows. (1)plate lh (2 nos.) & rh (2 nos.), qty. 04 nos. (2) plate 10x30x140 mm, qty. 08 nos. (3) hex. head bolt m16 x 60 x 30, grade 8.8 pc of make m/s. lps / tvs / dfl / unbrako, qty. 08 nos. (4) fs lock nut for m16 as per clw specn. no. clw/ms/3/089, alt-2, qty. 08 nos. (5) spring washer for m16 as per is:3063, qty. 08 nos. [ warranty period: 30 months after the date of delivery ]

Armour Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors