Latest arms Tenders | Government arms Tenders

CTN :43168288

22 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of miniature circuit breaker,brake shoe,smps flat cum boost charger,head light halogen bulb,indicator assy fron and rear,wire harness,converter,throttle,controller set,accelerator assy,spark plug ngk bpmr7a,fuel filter,air filter,gasket set,rocker arms,auto cut moving head,carburator,handle assy,gear case assy,fues 15 amp,fues 20 amp,fues 30 amp,oil filter tc,oil filter,fuel filter,brake shoe liner set,duel filter assy,master cyl assy,wheel cyl assy af30d,spring kit,bearing with seal,head lamp assy,steering knuckle bearing lh and rh,hyd pump af30d,outer bearing,inner bearing,king pin kit af30dneedle bearing type

corporations/Associations/Others

CTN :43169666

18 Dec, 2025 5.00 Lacs

Bulandshahr - Uttar Pradesh

Tender For works related to replacement/straightening of 33 kv and 11 kv electric poles damaged and bent due to accidents, replacement of damaged abcs, broken wires and cross arms etc.

corporations/Associations/Others

CTN :43155848

24 Dec, 2025 NA

Multi City - Multi State

Tender For auction sale of empty barrel good 210 ltr 18/22kg,25kva transformer, non-repairable without oil, with aluminium winding,m.s.iron scrap, pole, i beams, cross arms,scrap single phase energy meter(electrostatic),scrap 3 phase energy meter (electrostatic)

CTN :43159035

07 Jan, 2026 NA

Agra - Uttar Pradesh

Tender For supply of high back chair,large fixed table for members,table for court staff,table for authorized representatives,chair for court staff,chair for ars,chairs for visitors,cabinets,l shape table with attached pedestrial and drawers,table back unit,high back chair,mid back chair for visitors,sofa 3 seater,sofa 1 seater,coffee table,book shelf big,officers table with drawers,side table,officer chair,chair visitors,staff chair,almirah,officers l shape table with drawers,side table,officer chair,chair visitors,almirah small,sofa 3-seater,coffee and lunch table,officers table with drawers,side table,officer chair,chair visitors,almirah small,table big,chairs,high back chair,movable compactor,almirah,table,chair,racks for ups,tables,chairs,3-seater with 2 arms,2-seater with 2 arms,table,chairs,3-seater with 2 arms,front table,chairs,side table with drawers,table,chairs,side table,3-seater with 2 arms,chairs,bookshelf,chair,table,table,chair,table,chair,almirah

CTN :43159467

30 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of firing range auto scoring system for small arms weapons

CTN :43159540

31 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of pop up target system for small arms firing range

CTN :43160924

22 Dec, 2025 NA

Gandhinagar - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - defence; repair of search lights, tactical torch, loud hailer and arms and ammunition locker; service provider

CTN :43139242

22 Dec, 2025 1.50 Lacs

Hyderabad - Telangana

Tender For supply of frame and base , front designing and printing , lighting and electrical , helmet flex bd , single seated sitting eqpt without arms

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43141302

22 Dec, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of bept register , ppt register , cpt register , drone training register , course report register , small arms firing test register , attendance register , layer test register , target record register

Arms Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others