Latest articulated robot Tenders | Government articulated robot Tenders

CTN :45427779

18 Jun, 2026 2.46 Lacs

Thanjavur - Tamil Nadu

Tender For supply of eee lab items - furniture, 5hp/3.75kw/415v1500rpm three phase(3 )synchronous motor with starting / loading arrangement and with work bench voltage:415v ac/220v dc for field excitation make: benn rating: 5hp/ 3.75kw speed:1500rpm no of poles : 4 synchronous starter dc excitation field current :0.8a digital voltmeter ac(0-500v) moving iron type:01qty digital ammeter ac(0-20a) moving iron type :01qty digital ammeter dc(0-2a) moving coil type :01qty digital power factor meter 600v/10a :01qty 3pole mcb/dc mcb with 20a fuse carrier and supply indicators (three pin plug socket should also be provided) :03qty digital rpm indicator with proximity sensor: 01qty banana connectors for motor/starter/supply outputs :01qty control panel (hylem sheet(5*1.5feet) with ms panel) :01 work bench spec: size: 4feet*3feet*2 1/2 feet height leg teak wood with top 3/4" inch plywood 18mm plywood withone mica sheet for finishing front side cupboard with door open and closed type back side wiring box with door open and closed type, performance of ultrasonic and moisture sensors(5v dc/15ma(40khz/digital output) arduino uno: microcontroller-atmega328p on-board digital sensor components two push button switches and dour leds buck converter and relay for 5v and potentiometer-one each 2x16 liquid crystal oscillator(lcd) and mini bread-one each onboard digital sensor modules: ultrasonic sensor module(3cm-100cm) and soil moisture sensor -one each all sensor modules should be mounted on legend size pcb, speed control of ac motor using variable frequency drive(vfd) (0.5hp/415ac/5a(3 )) variable frequency driver (vfd) unit: input voltage:single phase, 230v ac +-10%, 50hz output voltage : three phase output frequency range: 0 to 60hz suitable for 0.75kw motor output current 4.2a vf pattern of spwm control 2pole mcb for on/off control of mains ac voltmeter, ammeter and speed indicator should be provided external stop/start and frequency control should be provided output terminals should be provided and must be brought out in front panel experimental board should be housed in a cabinet with suitable cover three phase induction motor motor type:squirrel cage |rating:0.5hp voltage rating :415v ac speed :1440rpm+-5% insulation : class b/f

CTN :45406895

23 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of variable frequency drive rating 55 kw input voltage 380-415 v ac, protection class-ip20. make: danfo

CTN :45417602

10 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of lab items for eee and mechanical - eee and mechanical lab items, single phase transformer rating: 1 kva, 50 hz input: 230 v ac output: 115 v ac type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation, three phase transformer type: three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory use bench/floormounted suitable for laboratory operation. all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , on / off control of lamp using solid state relay kit type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status , mcb elcb trainer kit 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5amps two pole elcb 30ma lamp load single phase 5amps panel enclosure and terminal outlets , single phase induction motor kit for load test by speed control of vfd (variable frequency drive) 2 hp single phase 230v complete load test experimental setup(with brake drum/pulley) induction motor -1 no work bench setup with digital meter -1 no motor stand with ant vibration bush 1 set loading arrangement with spring balance non-vibrating brake arrangement with stand and electrical work bench , 3 phase induction motor kit three phase squirrel cage induction motor with rope brake arrangement non-vibrating brake arrangement with stand and electrical work bench three phase squirrel cage induction motor 5 hp, 440 v, 1440 rpm, foot mounted type, frame size 132 mm, core length 110 mm, mechanical rope loading set up with 1" screw rods 2 nos, 6" adjustable wheels 6" 2 nos, back support frame, 9" aluminium drum, 0 50 kg spring balances 2 nos , dc shunt motor kit for load test dc shunt motor rope brake arrangement non-vibrating brake arrangement with stand and electrical work bench d.c. shunt motor 5hp, 220v, 1500 rpm, foot mounted type, frame size 132 mm, core length 110 mm, field current 0.5a, armature current 11a, 4 pole with inter poles, mechanical rope loading set up with 1" screw rods 2 nos, 6" adjusting wheels 6" 2 nos, back support frame 9" aluminum drum, 0 50 kg spring balances 2 nos. , bldc motor kit with electrical work bench *36v 400w bldc pro motor 1 no inbuilt volt and ammeter and rpm meter inbuilt power supply input 230v ac

State Government

CTN :45410652

13 Jun, 2026 NA

Sundernagar - Himachal Pradesh

Tender For supply of variable voltage variable frequency drive (q3)

Central Government/Public Sector

CTN :45065367

12 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of variable voltage variable frequency drive (q3)

CTN :45386599

15 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for eee dept - purchase of lab equipments for eee dept, single phase transformer.itemcode:b002 single phase transformer,rating: 1 kva, 50 hz, input: 230 v acoutput: 115 v ac,type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation)., acidity test kit itemcode:b005specifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, dc stepper motor drive kit with stepper motoritemcode:b010specifications:stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet withprinted circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection, dc servo motor drive kit with servo motor itemcode:b011specifications:input supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided, three phase resistive load itemcode:b013specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, single phase single pulse / sinusoidal pwm inverter using mosfet/igbt kit itemcode:b028specifications:type : single phase pwm inverter trainer power device : mosfet / igbt based inverter circuit input supply : 12 24 v dc output voltage : 30 v rms ac output phase : single phase output frequency : 0 50 hz variable output power : 100 w single pulse pwm operation sinusoidal pwm (spwm) operation variable frequency control pwm generation and firing control circuit inbuilt gate drivercircuit provided test points provided for waveform observation and analysis built-in resistive load provision, on / off control of lamp using solid state relay kit itemcode:b029specifications:type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status, speed control of ac motor using vfd drive module with ac motor itemcode:b030specifications:type : variable frequency drive (vfd) module input supply : 415 v ac, three phase, 50 hz o

CTN :45374144

13 Jun, 2026 NA

Multi City - Multi State

Tender For supply of variable voltage variable frequency drive (q3)

Central Government/Public Sector

CTN :45372374

16 Jun, 2026 NA

Multi City - Multi State

Tender For supply, fitment, installation, commissioning and testing of electrical variable voltage variable frequency ac drive rating-15kw/11kw, 3-phase 380-480 vac 50/60 hz, dc power supply: 510-680 vdc (cimr- ad4a0031fma).nominal input current (nd):24 amp. nominal input current (hd): 31 amp. output power rating (nd):15kw.output power rating (hd):11kw.frequency control range: 0-400hz.motor power-15kw/11kw.emc filter class c2 integrated. braking of standstill by dc injection. salient features: operation mode selection ,dc injection braking and short circuit braking ,speed search ,delay timer, pid control ,dwellfunction ,energy saving, acceleration and deceleration times ,slip compensation, torque compensation ,carrier frequency, frequency upper/lower limit torque control ,jump frequency. main control functions: torque control , drop control speed/torque control switch, feed forward control, zero servo control, momentary power,loss ride- thru and speed search, over torque detection, torque limit. speed control range : v/f control 1:40, open loop vector control 1:200, open loop vector control for pm 1:20, closed loop vector control for pm 1:1500, v/f control with pg 1:40 ,closed loop vector control 1:1500, advanced open loop vector control for pm 1:100. output overload tolerance: nd rating: 120% of rated output current for 60s, hd rating: 150% of rated output current for 60 s (derating may be required for repetitive loads).protection design: ip00 open-chassis, ul type 1 enclosure. ambient temperature (open-chassis): 10 to +50 degree celsius. standard compliance: ul508c iec/en61800 iec/en61800-5-1 ,two safe disable inputs and 1edm output according to iso/en13849-1 cat.3 pld iec/en61508 sil2. make: yaskawa /schnieder /abb/siemens/mitshubishi/angel or similar. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45346460

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of eee lab items dept use - three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory usebench/floor mounted suitable for laboratory operation all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , dc stepper motor driver kit with stepper motorinput supply : 230 v ac, 50 hz stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection. , dc servo motor driver kit with servo motorinput voltage 12 - 24v, dc, 5a, 10-60rpminput supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided , three phase resistive loadrating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , single phase induction motor with load arrangement 5hp ,230v, 1400 rpmsingle phase, 2hp,230v,1440 rpm with dol starter loading arrangement and electrical workbench mechanical rope with aluminum brake drum loading with adjustable wheels - 2 no s 0-50 kg spring balance - 2 no s electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor and starter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeter , three phase synchronous motor with electrical workbench 3-phase synchronous motor with electrical workbench and loading arrangement , rating: 5 hp voltage: 440 v ac, 50 hz speed: 1500 rpm (synchronous speed), induction start using damper winding, suitable starter panel, dc supply (0 220 v dc adjustable (variable dc control) within the panel),and necessary workbench electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor , starter, exciter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeters and voltmeters for motor to be provided on panel board. , synchronizing panelthree phase, 415v, 15a synchronizi

CTN :45351357

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, acidity test kitspecifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, single phase resistive loadspecifications:type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability, three phase resistive load specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, three phase capacitor bank specifications: 3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided, 3 phase auto transformer starter specifications: 3-phase variable autotransformer input: 415 v output: 0 470 v ac (continuous) current: 15 a copper wound, carbon brush type heavy duty toroidal/core construction mounted in powder coated ms/crca enclosure front panel mounted voltage control knob with scale indication proper insulated terminals provided floor/bench mounted type suitable for laboratory use input / output terminal arrangement provided mcb/fuse protection provided proper earthing terminal provided ventilation arrangement for heat dissipation, 3 floor lift interfacing model specifications: type: table-top lift model floors: 3 levels structure: transparent acrylic / ms frame cabin: moving lift car with guide rails drive: dc geared motor / stepper motor motion: up/down movement, floor indication leds (1, 2, 3) direction indicators (up/down), start & stop atevery stage, over load limit control three-floor lift operation plc interfacing and programming floor selection logic automatic stopping at floors direction indication system educational demonstration of elevator automation, mcb elcb trainer kit specifications: 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5amps two pole elcb 30ma lamp load single phase 5amps panel enclosure and terminal outlets, signal generator specifications: frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vp-p. rise time: 100 ns. distortion, dso specifications: bandwidth: 50 - 100 mhz. sampling rate: 1gs/s. channels: 2 (minimum) power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalent communication interface: usb host, usb interface. 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf 2 passive probes (1x/10x), pwm based

Articulated Robot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector