Latest artificial stone Tenders | Government artificial stone Tenders

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

CTN :45351204

19 Jun, 2026 NA

West Kameng - Arunachal Pradesh

Tender For bid to ras supply of modular desk and bench , solar street light bracket 30w led bracket closed with bty 12v comma iron pole 6 to 8 meter with complete fittings and installation , steel almirah , wave slide , spiral slide , swing two dash seater , merry go round with platform bracket six seater bracket closed , seesaw two seater , horse spring rider , pencil , eraser , sharpener , ball pen , gel pen , sketch pen multi colour , drawing book , notebook , geometry box , clip board , inauguration stone base dash etched on black granite 2 feet x 2 feet

CTN :44925811

18 Jun, 2026 NA

Nagpur - Maharashtra

Tender For bid to ras corrigendum : supply of lpg work e e - sitc of lpg cylinder adaptors , sitc of gi lpg pipeline installation , sitc of suraksha lpg hose , sitc of gas pressure gauge , sitc of non return valve , sitc of gi ball valves , sitc of three burner stove , sitc of lpg regulator , sitc of cylinder manifold cage , sitc of flexible ss pigtails , sitc of sitc of manifold header pipe , sitc of sitc of cylinder connecting nipples , sitc of pilot line with isolation valve , sitc of gas flow meter optional , sitc of exhaust fan , sitc of auto-clean chimney , sitc of inline duct fan , sitc of exhaust fan louver , sitc of gi ducting , scaffolding , four number ms steel table top finished by granite stone ) /bid number : gem/2026/b/7447123 * /dated: 17-04-2026 & & / bid document 1 / 24

Central Government/Public Sector

CTN :45247239

18 Jun, 2026 16.50 Lacs

Aizawl - Mizoram

Tender For corrigendum : supply, installation, testing, commissioning of rotating hollow granite ball fountain at mizoram science centre, aizawl at berawtlang, aizawl

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Central Government/Public Sector

CTN :45270462

10 Jun, 2026 20.50 Lacs

Bangalore - Karnataka

Tender For supply of upvc gate valve , 1 inch upvc gate valve , 1 inch cpvc nrv , health faucet ptmt , health faucet ss , shower ss , shower rose , connection pipe pvc , connection pipe hot cold , flush tank , flush tank ball cock as per sample 7 types , syphon set for flush tank as per sample 7 types , wall mounted w ccover as per samples , washing machine tap , washing machine adaptor , gerberit flush tank push plate as per sample , divertor inside fitting for mixer as per samples , pillar cock spindle as per sample jaguar , wall mixture , two in one bib cock brass , two in one angle cock brass , spindles half round ceramic , grating with hole ss , cp nipple , three by four inch cpvc pipe , three by four inch cpvc collar , three by four inch cpvc elbow , three by four inch cpvc union , three by four inch cpvc tee , three by four inch 1 inch cpvc bush , three by four inch cpvc shoe , three by four nch cpvc mta , three by four inch cpvc fta , three by four inch cpvc end c ap , 1 inch cpvc pipe , 1 inch cpvc collar , 1 inch cpvc elbow , 1 inch cpvc union , 1 inch cpvc tee , 1inch 1 and one by four inch cpvc bush , 1 inch cpvc shoe , 1 inch cpvc mta , 1 inch cpvc fta , 1 inch cpvc end cap , 1 and half inch cpvc pipe , 1 and half inch cpvc collar , 1 and half inch cpvc elbow , 1 and half inch cpvc union , 1 and half inch cpvc tee , 1 and half inch 1 and one by four inch cpvc bush , 1 and half inch 1 inch cpvc bush , 1 and half inch cpvc shoe , 1 and half inch cpvc mta , 1 and half inch cpvc fta , 1 and half inch cpvc end cap , 2 inch cpvc pipe , 2 inch cpvc elbow , 2 inch cpvc union , 2 inch cpvc tee , 2 inch cpvc mta , 2 inch cpvc end cap , cpvc solvent tin 137 ml , tefflon tape , waste coupling , waste pipe , sink coupling , cpvc brass fta half inch three by four inch , cpvc brass mta half inch three by four inch , cpvc brass elbow fta half inch three by four inch , cpvc brass elbow mta half inch three by four inch , cpvc brass tee half inch three by four inch , 2 inch upvc pipe , 1 and half inch ss nails , three by four inch plumbing sadles , 1 inch plumbing sadles , 1 and half inch plumbing sadles , 2 inch plumbing sadles , door bend 2 and half inch pvc , door tee 2 and half inch pvc , collar pvc 2 and half inch , monkey spanners big small sizes , pipe wrinch 12 inch 16 inch , combination plier , nose plier , udjustable spanner , wooden gatta 1000 nos each pocket , screw driver small big , concrete drilling machine , granite drill bit 19mm 25mm , 1 and half hp pressure pump , 1 and half inch hdpe mta , 2 inch upvc collar , 2 inch upvc union , 2 inch upvc mta , 2 inch upvc elbow , upvc solvent , telephone shower 1and half mtrs with stand , 1 inch hose clamp , 1 inch hose nipple

State Government

CTN :45081420

18 May, 2026 NA

Shivpuri - Madhya Pradesh

Tender For tender for construction items - sand, black gitti 20 mm, black gitti 40 mm, khanda boulder 9*9*9, white gitti 20 mm, white gitti 40 mm, bricks (open bhatta) (20x10x10 cm), bricks (kanpur no 1) (20x10x10 cm), fly ash bricks (20x10x10 cm), iron tmt saria (6 mm), iron tmt saria (8 mm), iron tmt saria (10 mm), iron tmt saria (12 mm), iron grill/gate/window/door (constructed) as per design, murrum, centering suttring rent, acrylic distemper (isi mark), plastic emulsion paint (isi mark), oil bound distemper (isi mark), cement primer(isi mark), oil paint (isi mark), wall putti(isi mark), pvc coated copper cable1mm (isi mark), pvc coated copper cable1.5 mm (isi mark), pvc coated copper cable 2.5 mm (isi mark), 3 pin socket (isi mark), 5 pin socket(isi mark), power plug (isi mark), switch (isi mark), holder (isi mark), ceiling rose (isi mark), mcb (isi mark), main switch isi mark, pvc board 4 x4 isi mark, pvc board 8 x4 isi mark, pvc board 12 x4 isi mark, pvc casing isi mark 0.5 inch, pvc casing isi mark 1.0 inch, pvc condul tl socket 0.5 inch isi mark, ceiling fan 48 inch isi mark, fan regulator, tube light complete isi mark, cfl 10 watt isi mark, led 10 watt isi mark, led 5 watt isi mark, cement grade 33 (isi mark), cement grade 43 (isi mark), cement grade 53 (isi mark), vitrified tiles 60cm x 60cm, ceramic floor tiles 30cm x 30cm, ceramic wall tiles 30cm x 45cm, door & window frames made of wood from sal, bija, saku wood, panels for doors & windows veneered plate pressed three layer grade wood article board (isi 3097) grade-1, granite 20mm, zigzag pcc paver block 75mm thickness & minimum height 200 mm. colour as per required, urinal pot complete, washbasin complete, kitchen sink complete, stone dust, aluminum frame with glass, european pattern toilet sheet flush, cistern, water storage tank 500 ltr (isi mark), water storage tank 1000 ltr (isi mark), steel tap 0.5 inch, steel tap 1.0 inch, pvc pipe (isi mark) 0.5 inch, pvc pipe (isi mark) 1.0 inch, pvc pipe (isi mark) 2.5 inch, pvc pipe (isi mark) 4.5 inch, pvc tee (isi mark) 0.5 inch, pvc tee (isi mark) 1.0 inch, pvc tee (isi mark) 2.5 inch, pvc tee (isi mark) 4.5 inch, pvc elbow (isi mark) 0.5 inch, pvc elbow (isi mark) 1.0 inch, pvc elbow (isi mark) 2.5 inch, pvc elbow (isi mark) 4.5 inch, pvc socket (isi mark) 0.5 inch, pvc socket (isi mark) 1.0 inch, pvc socket (isi mark) 2.5 inch, pvc socket (isi mark) 4.5 inch, pvc ball (isi mark) 0.5 inch, pvc ball (isi mark) 1.0 inch, pvc ball (isi mark) 2.5 inch

Central Government/Public Sector

CTN :45002749

16 May, 2026 1.22 Crore

Jaduguda - Jharkhand

Tender For annual civil maintenance and development works in ucil housing colony jaduguda for one year d d - earth work in excavation , filling available excavated earth , filling in plinth with sand , dismantling old plaster , demolishing cement concrete , cleaning jungle , demolishing brick work , plain cement concrete 1 isto 3 isto 6 , plain cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1 5 isto 3 , steel reinforcement , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , 25mm thick cement concrete flooring , the overhead tank , asbestos cement sheet , g i sheet in roofing , structural steel work , 35mm thick isi marked flush door , 24 mm thick factory made pvc door shutters , white washing , water proofing cement paint , premium acrlic smooth exterior paint , white cement based putty , acrylic emulsion paint , cleaning of overhead water tank , renewing glass panes , paver block , vitrified tiles , ceramic glazed wall tiles , orissa pattern w c pan , european type w c pan , white vitreous china wash basin , vitreous china wash basin , mirror of superior glass , flushing cistern , low level cistern , pedestal type w c pan , 15 mm bided or jet spray , c p brass shower rose , c p brass angle valve , brass stop cock , close hole wall mixer tap , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , 75 mm plain bend , 100 mm plain bend , 15 mm g i pipes , 20 mm g i pipes , 15mm normal bore g i union , 20 mm normal bore g i union , c p brass extension nipple , p v c waste pipe 32 mm dia , c p brass bib cock , brass bib cock , brass extension nipple , ball valve , renewal of old putty , excavating trenches , surface dressing , transportation of excavated earth , foundations or footings or bases of column etc. for mass concrete , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , water proofing treatment , synthetic enamel paint , cement primer , chain link , 18 mm thick granite

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Artificial Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector