Latest artworks Tenders | Government artworks Tenders

CTN :42810926

15 Dec, 2025 2.00 Lacs

Kondagaon - Chhattisgarh

Tender For corrigendum : supply of cctv repairing work : : - 16 port nvr , 8 port poe tp link , hdmi cable , oraimo ows 1351 , acer pure 43 , cat 6 cable ae , bullet 2mp ip with colour , junction box , rj 45 , kaju clip , 2u rack , 8 port poe full giga , 8 port nvr , hdd 1 tb , hdd 3 tb , 4g router , wifi router , dvr , power supply , cctv cable , switch , services charges

CTN :43141356

22 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of car diary , work order pad , dry day slip , cello tape , tie , slide sheet 175 gsm , ecrylic colour , fevibond tube , hand made sheet , drawing roll

CTN :43144629

22 Dec, 2025 NA

Nainital - Uttarakhand

Tender For supply of fabrication of tin shed for overhead protection in the unloading bay near urc d d -installation of colour coated cgi sheet , six standing round poles , twelve perling structure square pipe , five rafter kainchi structure square pipe , hard standing concrete and cement , laying of interlocking tiles , enamel paint work

CTN :43146436

22 Dec, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of acp board 24 x 12 inch , acp board 18 x 12 inch , acp board 48 x 48 inch , clear vinyl board with mash print 48 x 48 inch , acp board 24 x 48 inch , colour board with frame 2 x 3 feet , acp board for ata 7.5 inch x 1.5 feet , acp board proof yard 6 x 2 feet , work progress writing board 4 x 4 feet , clear vinyl board 24 x 36 inch , outer pillar model room board 3 x 2 feet , depot with shed details 5 x 4 feet , swt board 3 x 2.5 feet , model room inner board 4 x 3 feet , missile board 3 x 2 feet

CTN :43160915

22 Dec, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of rcc plinth incl excavation and concreate,gi structural framework and eraction,colour coated roofing sheet as per reqmt,miscellaneous and finishing work,labour charges

State Government

CTN :43163126

23 Dec, 2025 5.27 Lacs

Bhavnagar - Gujarat

Tender For repairing & renovation work at iti shihor (rto section cabin, front side colour work, pop in audio visual room & principal office, various repairing work in building, etc)

corporations/Associations/Others

CTN :43150483

22 Dec, 2025 11.99 Lacs

Ahmedabad - Gujarat

Tender For reparing, colour work and other related work on curbing, central verge on main and internal tp road in indrapuri ward, south zone.

corporations/Associations/Others

CTN :43150544

19 Dec, 2025 24.80 Lacs

Ahmedabad - Gujarat

Tender For a.r.c. work for colour work of railing and kerbing in west side brts route and other brts route in ahmedabad janmarg ltd.

State Government

CTN :43145347

17 Dec, 2025 9.51 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments at district park at dilshad garden (link chain) (specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thic made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. ., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. ., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrets is set, f

State Government

CTN :43145348

17 Dec, 2025 27.18 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments in all the 6 parks as mentioned in the schedule.(specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to

Artworks Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government