Latest asbestos corrugated sheet Tenders | Government asbestos corrugated sheet Tenders

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

Central Government And Public Sector

CTN :45722240

20 Jul, 2026 NA

Kamega - Arunachal Pradesh

Tender For supply of day to day consumable items for maintenance of turbines of kameng hps - best quality stainless steel shim (ss304) of thickness 0.02 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.06mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.07mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.08 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.09 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.10 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.12 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.14 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.25 mm, width: 500mm, stainless steel shim (ss304) of thickness 0.50 mm, width: 500mm, best quality neoprene rubber cord 4 mm, best quality neoprene rubber cord 5.5 mm, best quality neoprene rubber cord 6 mm, best quality neoprene rubber cord 7 mm, best quality neoprene rubber cord 8 mm, best quality neoprene rubber cord 10 mm, best quality neoprene rubber cord 11 mm, hylomer blue gasket jointing sealant, champion make asbestos free oil-250 gasket, 3 mm thk (1500 mm x 5000 mm), best quality nitrile rubber sheet, size: 600x1000mm, 1.5 mm thickness, best quality nitrile rubber sheet, size: 1200x1000mm, 3 mm thickness, loctite 406 (20gm), anabond 666t-max (100gm), loctite si 595 (300 ml), loctite 243 threadlocker (50 ml), skf bearing grease 3in/5, m12x100 hilti anchor bolt, m16x150 hilti anchor bolt, m20x200 hilti anchor bolt, m12x 100 grade: 8.8 bolt with nut & washer, m16x 100 grade:8.8 bolt with nut & washer, m20x 100 grade:8.8 bolt with nut & washer, m20 full threaded stud, grade: 8.8 of length 1m, m12 full threaded stud, grade: 8.8 of length 1m, m16 full threaded stud, grade: 8.8 of length 1m, gland packing, make: stoplik, style-99, size: 10mm, paint brush flat 50mm, paint brush flat 75mm

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704170

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

corporations/Associations/Others

CTN :45492354

30 Jun, 2026 26.52 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of champion style 1960 gland pkg metallic with spl wire 6 mm , champion make gland packing metallic style 1960 size 8mm , champion 1960 gland packing met 10mm , champion style 1960 gland pkg metallic with spl wire 12 mm , champion style 1960 gland packing metallic 14mm , spitman style 1960 high gread asb gland pkg 16 mm , special graphited gland packing rope style 1910 8 sqmm , special graphited gland packing rope style 1910 10 sqmm , cafj sheet style 54 super metall 2 mm , cafj sheet style 54 super metall 5 mm , metallic jointing sheet style 54 size 3 mm , metallic jointing sheet 3.5 mm , caf jointing sheet style 54 nm point 5mm , caf jointing sheet style 54 n m 1 point 5mm , caf jointing sheet of 54 n m 2 point 5 mm , caf jointing sheet style 54 n m 3 mm , gland pack 2222 n m 10 mm , self sealing 340 x310 x35 , self sealing ring 150 x120 x20 , self sealing 125 x100 x18 , self sealing ring 282 x242 x32 , self sealing 230 x186 x30mm , caf jointing sheet 59 oil 1 mm , caf jointing sheet 59 oil 2 mm , caf jointing sheet 59 oil 3 mm , spitman style 1960 high gread asb gland pkg 19 mm , spitman style 1960 pkg metallic 18 mm , gland packing 2222 n m 12 12point 5sqmm x3 mtr , oil paper point 5mm , oil pape kg point 75mm , gland packing n m style 1100 , asbestos self sealing ring metallic , metallic gland rope style 1960 10 sqmm , metallic gland rope style 1960 12.5 sqmm , champion asbestos cloth si xe 3 mm width 50 mm , pacemen style 40 white dry asbestos rope 12 mm , pacemen style 40 white dry asbestos rope 20 mm , packman style 040 white dry asbestos rope 16mm , paceman style 960 metallic gland packing ring 42 x 18 x 12 mm , gland packing ring metallic champion style 1960 asbestos gland packing dry and lubricated and reinforced whil speial wire 55 x 27 x14mm , gland packing ring metallic 23 x14 x5 , gland packing ring metallic 25 x16 x5 , gland packing ring metallic champion style 1960 asbestos gland packing , gland packing ring metallic spitman style 1960 asbestos gland packing dry and lubricated reinforced with sp wire 42 x 26 x 8 mm , gland packing ring metallic spitman style 1960 asbestos gland packing dry and lubricated reinforced with sp wire 32 x 20 x 6 mm , gland pkg metl style 1960 90 x62 x14point 5 mm , asbestos self-sealing ring metallic , spitman style self sealing ring bonnet , parmanite sheet 3 mm thick , parmanite sheet 3 mm thick non metallic , non metallic gasket style 51 size 5mm , non metallic gasket style 51 size 3mm

CTN :45703809

11 Jul, 2026 4.57 Lacs

Gajraula - Uttar Pradesh

Tender For supply of asbestos rope , graphite packing , weving tape , steam packing , lp joint sheet , hp steam jointing

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

Central Government/Public Sector

CTN :45682586

13 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of square type front and back cover gasket for reverser and ctf servomotor as per clw drg 3twd.102.034 alt 3 or latest. material: compressed asbestos fiber high pressure jointing sheet to is 2712-19719/1979/1998 (metallic reinforced). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45606508

30 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For corrigendum : purchase of asbestos corrugated sheet and ridges

State Government

CTN :45659331

09 Jul, 2026 NA

Surat - Gujarat

Tender For tender for supply of flexible pure graphite ring and joining sheet - flexible pure graphite ring endless covered with top and bottom metallic rope cut ring bull ring in single oblique cut to withstand temp 650 deg c and pressure 300 kg per cm2 size 16 id 29.5 od 6.75 mm thickness one set consists of 6 rings , flexible pure graphite ring endless covered with top and bottom metallic rope cut ring bull ring in single oblique cut to withstand temp 650 deg c and pressure 300 kg per cm2 size 26 id 50 od 12 mm thickness one set consists of 6 rings , flexible pure graphite filament braided multiple inconel wire cut ring metallic wire braided to withstand temp 600 deg c and pressure 600 bar size od 41 id 25.5 8 mm thickness , flexible pure graphite cut ring size 41 58.5 9 mm , flexible pure graphite ring with oblique cut in 2 halves to withstand temp 600 deg c and pressure 300 kg per cm2 size 26 id 39 od 6.5 mm thickness , asbestos free metallic fibre jointing sheet size 2000 mm 1500 mm 3 mm for steam application to withstand continuous service temp 550 deg c and max operating pressure 170 kg per cm2 , asbestos free metallic fibre jointing sheet size 2000 mm 1500 mm 5 mm for steam application to withstand continuous service temp 550 deg c and max operating pressure 170 kg per cm2

Asbestos Corrugated Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors