Latest asbestos product Tenders | Government asbestos product Tenders

State Government

CTN :42882238

29 Dec, 2025 41.26 Lacs

Kheda - Gujarat

Tender For corrigendum : supply of various switchgear spares for emd-3,wtps. - abb make 3 pole power contactor type : ax50-30-11, coil voltage 110 v,50 hz ac, abb make 3 pole power contactor type : ax80-30-11, coil voltage 110 v,50 hz ac, abb make auxiliary contactor 110 v ac, 2no + 2nc contact,type n22e, front mounted add on block(suitable for contactor type: ca5x-22e; 2 no + 2 nc, abb make, abb make tmax 3 pole motor protection circuit breakers type : t2s 160, in : 52a, icu : 50ka, auxiliary contact for mpcb hkf1-11 with 1no+1nc contact, over load relay, abb make ,type ta25du14m,range 10-14 a, abb make thermal overload relay type : ta75du 42, amp range : 29a to 42a, abb make thermal overload relay type : ta75du 52, amp range : 36a to 52a, siemens make mccb 3-pole 125a breaking capacity 55ka at 415v, 50hz reference no:-3va1112-5ee32-0aa0, vaccume contactor 300 amp. rating 415 volt with 2 no + 2 nc coil voltage 110v ac., aux.contact block - 1no + 1 nc for vacuum contactor type 3rt - 12, control & switchgear make digitalmotor protection relay.type-csmpm-06 si, 1.5kw l&t mf 1-1 phase dol starter category ss97227, l&t make dol starter,in sheet-steel enclosure,type-mk1,415v,50hz,3ph,o/l relay range -4 to 6.5 a,cat no-ss 96210poto, l&t- make, auxiliary contactor, type : mn 0-31 e, 3 no + 1 nc, ue: 415 v, ie: 4 a, ui: 690 v, ith: 10 a, ac-15, coil voltage : 110 v ac, l&t- make, auxiliary contactor, type : mn 0-22 e, 2 no + 2 nc, ue: 415 v, ie: 4 a, ui: 690 v, ith: 10 a, ac-15, coil voltage : 110 vac, contactor type ml.1.5, 25 amp, 230v, operating coil voltage, l&t catalogue no 5591857, l&t make um -no, l&t make,3pole power contactor in open execution type ml-2 for ac.ckt. with 2 not 2nc aux- contact,coil voltage 110vac, ac-3 rating 32a cat.no.ss 90701, l&t make 415v switch gear (acb), l&t make,3pole power contactor in open execution type ml-4 for ac.ckt. with 2 not 2nc aux- contact,coil voltage 110vac, ac-3 rating 70a cat.no.ss 90910, l&t make 415v switch gear (acb), l&t make power contactor type ml-4 with 2 no + 2 nc aux. contact, coil voltage 220v ac, ac-3 70 amp. rating, cat. no.-ss 90910, l&t make power contactor type ml-6 with 2 no + 2 nc aux. contact, coil voltage 220v ac, ac-3 110 amp. rating cat/. no-ss90921, power contactor,tp,ac-3 duty,coil voltage-240 v ac,type: mnx-40, l&t make 3 pole power contactor, type mnx45, ac-3 phase, rating 45a, coil voltage- 415 v ac, along with 2 no+2 nc, l&t make 3 pole power contactor with coil, type mnx 70, ac-3 rating 70a, coil voltage 415 v ac, cat.no.cs97076 suffix: d000, 220v dc auxiliary contactor 2no+2nc cat no : tca3 dn22, 220v dc auxiliary contactor 4no cat no : tca3 dn40, ml 4 con. kit set cat no ss 91660 l & t make, spare coil for ml10/ml11/ml12 contactor cat. no. ss91011, make - l & t, thermal over load relay 2.5-4 a (l&t) 678109, l&t make bi metal o/l relay type ml range 6.0-10a , cat no ss 9185800vo, l&t make 415v switch gear (acb), l&t make thermal over load relay with alarm contact.type : ml - 1, catlouge no ss91858,amp. range : 10.0 to 16.0, l&t make bi metal o/l relay for ml -2 range 13-21a , cat no ss 9185900co, l&t make 415v switch gear (acb), thermal o/l relay(l&t) range:20 to 32a,type:ml 2/3 relay,cat no:ss 91859, bimetel overload relay range 28-42 amp., bimetal thermal overload relay, range: 30-50a, l & t make auxiliary contact block,mx-a1 11e (aux contact block) 1 no + 1 nc, add-on auxiliary contact block suitable for auxiliary contactor, front mounting, make : l & t, type : mx-a1-22e, 2 no + 2 nc, ue: 415 v, ie: 3 a, ui : 690 v, ith : 10 a, ac-15, addon block contact make: l&t ,mnxa2(1no+1nc contact) ui-415 ,ith-10a ,ie-4a ac15, l&t make aux contact add-on of mnx type contactor for 2no + 2nc cat no:- cs94114, l&t make 3-position selector actuator (switch) catalogue no. ss91517, auxi block type :3tx 4 010 -2a :1 no, auxi blocktype :3tx 4 001-2a :1 nc, contact block

Central Government And Public Sector

CTN :43162521

29 Dec, 2025 40.44 Lacs

Bhopal - Madhya Pradesh

Tender For supply of supply of 1.5 tr invertor ductable ac,itc of 1.5 tr ductable ac,supply fixing copper piping for 1.5 tr,supply fixing ms stand,sf upvc drain pipe 25 mm dia,sf upvc drain pipe 40 mm dia,supply laying of 3x1.5 sqmm cable,supply laying of 3x2.5 sqmm cable,sf dp sheet steel enclosure with dp mcb,sf 5 amps to 32 amps 240 volts spmcb,gi ducting of thickness 0.63 mm sheet,gi ducting of thickness 0.80 mm sheet,providing fixing aluminium grill,providing fixing canvass connection

Central Government And Public Sector

CTN :43161304

29 Dec, 2025 40.44 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of supply of 1.5 tr invertor ductable ac,itc of 1.5 tr ductable ac,supply fixing copper piping for 1.5 tr,supply fixing ms stand,sf upvc drain pipe 25 mm dia,sf upvc drain pipe 40 mm dia,supply laying of 3x1.5 sqmm cable,supply laying of 3x2.5 sqmm cable,sf dp sheet steel enclosure with dp mcb,sf 5 amps to 32 amps 240 volts spmcb,gi ducting of thickness 0.63 mm sheet,gi ducting of thickness 0.80 mm sheet,providing fixing aluminium grill,providing fixing canvass connection

CTN :43144797

22 Dec, 2025 NA

Delhi - Delhi

Tender For supply of crimping tool , lan tester , power strip 15 5 04 socket , crocodile clip for shorting lead , cell 9a for multicenter , rj 45 jack , pencil cell aaa , pencil cell , flexible wire 2 core 4mm , fcbc float cum boost charger 24 48 , 10 sq mm lugs , charging lead , control card for sanchar radio spm 910d , ac to dc converter card for sanchar bty charger , airwick machine automatic spray , beacon light , bed sheet single striped off white colour , bed sheet white size 10x5 , mahar crest table cloth , red runner breath 3 feet , table cloth combat size 10 x 5 5 feet , table cloth un size 9 5 x 5 2 feet , white cloth , citation steel frame size 11 x13 5 height 15 5 , flag rope , foot mat size 3 x 2 ft , door bell , door bell cell , digital wall clock , hair dryer , dah , rp billa baju , rp white baju , lancer flag indian 39 cm x 27 cm , lancer flag un 39 cm x 27 cm , t flag indian 4 inch x 6 inch , t flag un 4 inch x6 inch , t flag regtl 4 inch x 6 inch , t flag stand , national flag 6 x 4 , un flag 5 x 3 , un flag 6 x 4 , south sudan national flag 5x 3 , south sudan national flag 6x4 , regimental flag 5x 3 , regimental flag 6x4 , pen stand , rat traper , scissors dressing for tailoring ) /bid number : gem/2025/b/6988530 * /dated: 11-12-2025 & & / bid document 1 / 35

CTN :43139187

22 Dec, 2025 NA

Jalandhar - Punjab

Tender For supply of provn of office eqpt for upgradation of office complex for army hockey node c c - pvs works , aluminium door with glass , sheet for partition , executive table with side in out tray , executive revolving chair , office chair , ac 1.5 ton with stabilizer , wall mounted fan , cap stand with mirror , digital clock , work station , acrylic bd for appt , electrical works , misc work

CTN :43141644

22 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of flex with tank picture 20 feet multiply 10 feet , flex with tank picture 10 feet multiply 5 feet , flex with tank picture 19 feet multiply 5 feet , flex with tank pictureic 10 feet multiply 1 feet , flex with tank picture 3 feet multiply 2 feet , flex board 6 feet multiply 3 feet with 4 feet both side , radium tape , radium double colour sticker , hydrogen cylinder , ac rubber pipe , primer 2 litre , oil , net 10 feet multiply 10 feet , nails 6 inches , nails 1 point 5 inches , white cement , raxine mixed colour , photo paper legal , spiral binding ring 2 inches , thermocol sheet 1 inch , double side tape 1 inch , nail 0 point 5 inch

CTN :42839101

22 Dec, 2025 1

Gwalior - Madhya Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - ladder 10 feet (ghodi - ladder), ladder 7 feet (ghodi - ladder), fan, hellogen lights, water dispenser (cool+hot), a.c., platform trolly, pallet trolly (hydrolic), ilr, basket trolly, hygrometer, pallet rack, green sheet (plastic), central sound and alarming system, cctv cameras

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :41843589

16 Dec, 2025 NA

Bathinda - Punjab

Tender For bid to ras bid to ras corrigendum : supply of mechanical engg labs and workshop equipment d d - hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , brake master cylinder , balancing machine , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , digital pyrometer , metallurgical microscope , spark test apparatus , standard prepared readymade samples or specimen with photographs , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch etc fitted on board , model of refrigeration cycle , digital anemometer , gas charging kit , model of open type refrigerant compressor , water cooler of 100 litre capacity , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , metallic cut section models of boiler mountings , model of nestler boiler , actual cut section model of four stroke single cylinder diesel engine , model of amal carburettor , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , slip gauges set , vernier bevel protractor , surface plate , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250 mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , simply supported beam apparatus , apparatus for determining centre of gravity of regular and irregular lamina , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing , models of pulleys , model of drilling jig , models of different types of gears , planner , milling machine conventional , power hacksaw , welding screen , gloves , oxygen regulator with spanner , motor coil winding machine , digital clip on meter , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , heat convector , desert cooler , electric oven , voltage stabilizer , digital energy meter , analog meggar , digital earth tester , plier , cutting plier 8 inch , leg vice 4 inch , round die handle , tap wrench- 5 by 16th of an inch to 1 inch , pipe vice , grinder , bench grinder 0.5 hp motor , scriber 8 inches , sheet steel wire gauge , circle cutting machine , edge folding machine , foot shear machine , rivet snap 0.25, 0.5, 0.75, 1 inch , rivet set 0.25, 0.5, 0.75, 1 inch , hand stake , funnel stake , round stake , taper stake , shovel , riddle , foundry bellow , silica sand , bentonite clay type , molasses , ladle , ladle holder , oil fired tilting type furnace , sand mix muller , moulding board //bid details 2 / 109

CTN :43129061

31 Dec, 2025 NA

Morena - Madhya Pradesh

Tender For supply of 7752085233-cable,cu,4cx10mm2,xlpe ins,arm,fr as per technical specifications, sow, scc and sor of the tender. , 7730652253-cable,cu,4cx25mm2,pvc ins,sh,arm as per technical specifications, sow, scc and sor of the tender. , 7730643303-cable,cu,3. 5cx70mm2,pvc ins,sh,arm as per technical specifications, sow, scc and sor of the tender. , installation of sheet moulding compound meter box with double hinged door of appropriate size as per technical specifications, sow, scc and sor of the tender. , cable laying including excavation up to 1 meter depth in all kind of soils and backfilling, connection and termination at grid pole or transformer, at meter, gail ac power box as per the tender , liaisoning with local grid power authority lineman, jen, aen or any other employee of mpmkvvcl for completion of all works as per technical specifications, sow, scc and sor of the tender. , liaison with local grid power authority-lineman, jen, aen or any employee of mpmkvvcl for successful filing and completing the application for change in load or upgradation of load as per the tender , liaison with local grid power authority or any employee of mpmkvvcl or any other related statutory body for filing and completing conversion of 1-ph to 3 ph industrial connection as per the tender

Asbestos Product Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector