Latest ash brace Tenders | Government ash brace Tenders

Central Government/Public Sector

CTN :45479217

10 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.g ov.in/vendtendordetnew.php using key: 0726tzw9sfg1944 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45454632

06 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of set of back rest frame for four seater & single seat of gs & slr coaches [one set consist one no. assembly as per col-i and one no. assembly as per col-ii to icf drg. no. gs4-6-1-409, alt. c. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45300981

10 Jun, 2026 5.67 Crore

Wardha - Maharashtra

Tender For corrigendum : supplying of furniture to newly formed cgrf office, for jr. law officer and mini training centre under o&m circle wardha tq. dist. wardha.-providing, supplying and placing of godrej make beat fabric high back 1.00chair with head rest. seat/back assembly: the seat & back is made up of1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knittedfabric , over moulded high resilience polyurethane foam high back size:51.8 cm. (w) x 75.2 cm. (h) seat size : 49.0 cm. (w) x 48.8 cm. (d) highresilience (hr) polyurethane foam: the hr polyurethane foam ismoulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per is:7888for 25% compression. armrests: the adjustable armrest is designed with thefollowing features: • up-down adjustment– 8 steps (8.0±0.5 cm range) • heightadjustable armrest structure which is powder coated & fitted with an armresttop. • fixed armrest top is pu moulded over metal insert. front pivotsynchro mechanism: the adjustable tilting mechanism is designed with thefollowing features360° revolving type. • single point control. • front-pivot fortilt with feet resting on ground ensuring more comfort. • tilt tensionadjustment. • 4-position locking with anti-shock feature. • seat/back tiltingratio of 1:2 . back height adjustability: back can be adjusted in 5 positionsby manually. stroke of height adjustable spine is 7 cm. back height adjustabilityis applicable for high back and mid back chair. pneumatic heightadjustment: the pneumatic height adjustment has an adjustment stroke of10.0 ± 0.3 cm. pedestal assembly with castors: the pedestal is injectionmoulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheelcastors. the pedestal pitch-centre dia is ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. withcastors) . twin wheel castors: the twin wheel castors are injectionmoulded in black nylon. option of sliding seat mechanism: seat can beslide horizontally as per user convenience. stroke of seat slide is 5 cm. thisoption is available for revolving pedestal type of chair. overall dimensions ofchair seat height - min 45.0 to max 55.0cm. height - min 102.0 to max 119.0cm. width & depth of chair as measured from p

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

Central Government/Public Sector

CTN :44998301

25 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of set of back rest frame for four seater & single seat of gs & slr coaches [one set consist one no. assembly as per col-i and one no. assembly as per col-ii to icf drg. no. gs4-6-1-409, alt. c. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45246623

28 May, 2026 NA

Multi City - Bihar

Tender For auction sale of depot ferrous scrap - stainless steel scrap (comprising of s.s, tray with cover, lav pan, wash basin d-type, toilet pan assembly, portable emergency light box, dust bin, inside dust bin, feeder junction box, tank, dump valve, bib cock, fleshing valve, health facets, solar water tank (cylinder type), wash basin, back rest lock & miscellaneous stainless steel scrap etc.) qty-1.010 mt.

State Government

CTN :44997509

04 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - provinding and fixing of new auditorium chair for audi hall total height from floor : 1020 mm+/- 10mm width centre to centre : 565 mm+/- 10mmdepth 10mm seatheight : 450 mm+/-10mmarm height : 630 mm +/- 10mmside leg : 50x2 mm ms chanel grouting supporting plate welded : 80x325x1.6 mm with 2 hole deep draw moulded foot rest. back assembly (hr)polyurethane foam is moulded with density=45+/-5kg/m3 ahardness load 17+/-2 kgf as per is: 7888 for 25% compression. inserted cr pipe 19x1.8mm supported by nylon strap. back size is 710x460x110 mm with covered by ppcp coverthe chair is provided with a fix back / pushback /flexi back and seat auto tip up with 2 rivers spring mechanism.seat assembly (hr) polyurethane foam is moulded with density=48+/-5kg/m3 and hardness load 18+/-2 kgf as per is: 7888 for 25% compression. upholster with 3layer laminated fabric 100% polyester and inserted cr pipe 19x1.8 mm. supported by 25x3mm flat, seat size 490x450x150mm. with covered by ppcp cover.arm rest / writing tab. the armrest is made wooden arm & hipc writing table with aluminium & ss alloy. powder coating all metal components is powder coated in black colour 70-80 micron

State Government

CTN :44997510

04 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - provinding and fixing of new auditorium chair for audi hall total height from floor : 1020 mm+/- 10mm width centre to centre : 565 mm+/- 10mmdepth 10mm seatheight : 450 mm+/-10mmarm height : 630 mm +/- 10mmside leg : 50x2 mm ms chanel grouting supporting plate welded : 80x325x1.6 mm with 2 hole deep draw moulded foot rest. back assembly (hr)polyurethane foam is moulded with density=45+/-5kg/m3 ahardness load 17+/-2 kgf as per is: 7888 for 25% compression. inserted cr pipe 19x1.8mm supported by nylon strap. back size is 710x460x110 mm with covered by ppcp coverthe chair is provided with a fix back / pushback /flexi back and seat auto tip up with 2 rivers spring mechanism.seat assembly (hr) polyurethane foam is moulded with density=48+/-5kg/m3 and hardness load 18+/-2 kgf as per is: 7888 for 25% compression. upholster with 3layer laminated fabric 100% polyester and inserted cr pipe 19x1.8 mm. supported by 25x3mm flat, seat size 490x450x150mm. with covered by ppcp cover.arm rest / writing tab. the armrest is made wooden arm & hipc writing table with aluminium & ss alloy. powder coating all metal components is powder coated in black colour 70-80 micron

CTN :44982471

08 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of "providing, supplying and placing of storage unit. overall size shall be 916mm(w)x486mm(d)x1981mm(h) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. it should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available. the product should be certified by greenguard gold, iaq gold, greenpro & griha. " , "providing, supplying and placing of storage wooden cabinets. overall dimensions is 900mm(w)x450mm(d)x735mm(h) . the top shall be wooden top plb(25 mm add in unit height ) .the rigid knock down construction , back , sides and door shall be made from 0.7 mm high yield strength crca ,rest in 0.8 mm crca . crca - 'd' grade as per is-513 . sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . locking shall be 5 lever cam lock for safe locking . handle shall be plastic flush & recessed handle . shelving shall have height wise adjustable shelf mounting . uniformly distributed load capacity of the shelf is 40 kg maximum . adjustable full shelf . accessories optional shall be cradle with pipes for hanging instadex files . leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . for vsdu 2 - a4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . the product should be certified by greenguard gold,iaq gold,greenpro. , providing, supplying and placing of high back chair. seat/back assembly: the seat is made up of 1.5 ±0.1cm. thick hotpressedplywood and upholstered with fabric upholstery covers and moulded polyurethane foam.the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered withmesh fabric.the back consist of adjustable lumbar support made of injection mouldedpolypropylene having an adjustment of 5.0 ±0.1 cm. the chair seat & back size are *seat size 53.5 cm. (w) x 51.0 cm. (d)*mesh back size 51.0 cm. (w) x 70.0 cm. (h) high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per is:7888 for 25% compression. armrests :the adjustable armrest is designed with the following features :· up-down adjustment– 6 steps (7.2 ± 0.5cm range) · armrest top is mounted on armrest structure made of glass filled nylon· armrest top is pu moulded over glass filled nylon insert. center tilt synchro mechanism with multi lock : the mechanism isdesigned with the following features: · 360° revolving type. ; · 3 position locking with anti shock mechanism.; · tilt tension adjustment pneumatic height adjustment: the pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. pedestal assembly : the pedestal is injection moulded in glass-filled nylon andfitted with 5 nos. twin wheel castors. the pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). twin wheel castors : the twin wheel castors are injection moulded in black nylon. width (w): 76.1 cm. ; depth (d): 76.1 cm.; height (h): 117.0 - 130.0 cm.; seat height (sh): 44.5 - 54.0 cm. the product should be certified by green guard gold, bifma level 2, iaq gold & greenpro , materialframe: mild steel, powder-co

Central Government/Public Sector

CTN :44843439

30 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of driver seat complete assembly to drg. no. 726-6-1-001 alt. n, col.-1 (item no. 16) for train-18 spare to be used in 3 phase locomotives. note : (1) all the crew friendly features of train-18 driver seat like head rest, arm support, front and back seat movement, reclining back support, vertical height adjustment, leatherette seat cover with comfortable cushion to be identical to train-18 driver seat of make : f.i.s.a. srl (italy), (2) suitable structural modification as necessitated by 3 phase loco cab base to windshield viewing height to be done by firm only without any additional cost. (3) firm should have supplied train-18 driver seat for train 18 or as train-18 spare for 3 phase loco past performance. make : f.i.s.a srl (italy) or vijayjot or volvo or medha servo drives or similar. [ warranty period: 30 months after the date of delivery ]

Ash Brace Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors