Latest ash evacuation service Tenders | Government ash evacuation service Tenders

State Government

CTN :45429301

19 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ktps-vii stage-cam-enquiry for supply of different sizes of butterfly valves in the wet ash handling system

State Government

CTN :45270000

16 Jun, 2026 2.55 Lacs

Multi City - Telangana

Tender For corrigendum : ktps-v stage- cam- transportation of fly ash and wet ash from various locations esp hoppers of unit x 56 nos in ash handling system by means of manual loading and disposing to ash pond or low laying areas in ktps complex with lead distance of 3 km approx with tractors trucks including leads safety measures like nose masks jaggery etc for supervisors and drivers loading labour etc. to complete for finished item of work and as instructed by the engineer in charge of the work during unit x overhaul for the f.y 2026 27-reg

State Government

CTN :45412893

23 Jun, 2026 1.99 Lacs

Korba - Chhattisgarh

Tender For work contract for fabrication of platform at bottom ash level area and wet fly ash conveying line of 1x500 mw, htps, cspgcl, korba west.

State Government

CTN :45275463

08 Jun, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : sale of dry fly ash and wet cinder ash from tnpl kachirayapalayam offsite on seasonal rate contract

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45379400

20 Jun, 2026 NA

Midnapore - West Bengal

Tender For procurement of consumables for oh of u6, 2026 under ahp-mm and tm dept, ktps. - pu tube connector 1/2 1/2" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/2inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector 1/4" to 10 mm npt(m) 1/4" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/4 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector size 10 mm diax3/8in bsp(m) ( push male pu tube connector thread size: 3/8 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make:-aeroflex/spac pneumatic ), anabond 666 size 310 gm # ( thixotropic silicone sealant in hdpe cartridge (310g) make:-anabond ltd ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe ( schedule 40 no negative tolerance in thickness is allowed ), bend,ms,200x200x90 deg ash water line ( seamless, schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend,ms,150x150x90 deg ash water line ( seamless,schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend pipe,90 deg, 50nbx50nb,ms seamless for wet ash system moc:-ms thk-4mm as per sch 40 steel pipe, bend,ms,80x80x90 deg ash water line ( seamless, sch-40 thk-7.0mm no negative tolerance in thickness is allowed ), bend,ms,100x100x90 deg ash water line ( seamless,sch-40 thk-7.5mm no negative tolerance in thickness is allowed ), u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts & 02 nos of washers for each u-clamp ), turn buckle,gi ( with ms mounting bracket type-eye to eye eye hole should be for m20 bolt total length-1350mm thk-20mm square section-50x250mm ), gasket,200nb coupling,neoprene rubber for ash conveying line ( temp withstand capacity-140 deg celcius ), flat gasket,8 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,9 inch,od,11 inch,th.,1/4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,6 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,7 in,od,8-3/4 inch,th.,1/ 4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,10 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,11 in,od,13 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), flat gasket,9 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,10 in,od,12 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), gasket,graphite coated asbestos,10 inch # # for sleeve coupling in vacuum line ( temp withstand capacity-140 deg celcius ), gasket,9 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket,6 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket for esp hopper gate mouth hand hole od-170mm,id-120mm,thk-5mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper chute face od-400mm,id-315mm,thk-3mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper hand hole for actuator sa25e125 od-118mm,id-90mm,thk-9mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper v

CTN :45192237

08 Jun, 2026 NA

Durgapur - West Bengal

Tender For corrigendum : provision of concertina fencing over the boundary wall extending from piyala gate to the wet ash disposal lines, including a part chain-link fencing.job no. 961 /dpps.

CTN :45346327

18 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of ss hex nipples, hose pipes, v-belts required for wet ash system of ahp/stage-i

State Government

CTN :45321671

29 May, 2026 14.64 Lacs

Multi City - Telangana

Tender For tggenco-ytps(5x800mw)-bop/ahp-unit-2- carrying out of mechanical maintenance of wet ash handling system including preventive, periodical, emergency and breakdown maintenance and house keeping of the wet ash handling system of ahp, unit- 2/stage-i/ytps for the period of 3 months from 01.06.2026 or actual date of commencement of work for the fy 2026-27 or till finalization of annual maintenance contract at headquarters whichever is earlier.