Latest auto control panel board Tenders | Government auto control panel board Tenders

corporations/Associations/Others

CTN :40035123

29 Apr, 2025 NA

Sirmaur - Himachal Pradesh

Tender For e-tender for procurement of differential transmitter & draught transmitter> - differential transmitter & draught transmitter, differential pressure transmitter : supply- 24 vdc, output- 4 to 20 ma (two wire), range- 0 to 250 mmwc, protection- (ip rating)- ip65, process connection: nnpt, zero and span range adjustment (with user manual), make: abb/rosemount, siemens/honeywell/wika/toshniwal, twisted pair analog instrumentation cable, type- 6 pair, size- 1.0 sqmm, conductor type- copper, overall shielded, armoured cables , juction box weather proof, size- 300x300mm, material- pvc, ip rating- ip65, digital indicating controller, power supply: 90-260 vac, input: universal (rtd, thermocouple, 4-20ma, 0-5 v/10v, etc.) programmable parameter, relay output: 02 contact (no+nc), tps: 24vdc, size: 96x96, make: masibus, pyrotech, terminal block, elmex screw clamp type polyamide feedthrough terminal block, voltage: 500 v, current: 10-16a, wire size: 2.5 sq mm, power supply (smps): input- 220 to 270v ac, 50hz, ouput- 24v dc, 2 amp, mounting- panel, note: 01. ensure warranty period for 6 months, otherwise, party will be rejected.02. replacement of parts if found not compatible with existing fitting conditions.03. ensure that the material quality is being maintained.

Central Government/Public Sector

CTN :39884760

22 Apr, 2025 NA

Goa - Goa

Tender For corrigendum : supply of prefilter pump for ro plant - pre filter pump assembly complete with motor , starter or control panel , gauge assembly board with suction and discharge pressure gauge pipes isolation cocks etc , loose fittings and instrumentation as applicable , shock mounts with center and side holding down fasteners , flexible pipes or bellows for all equipments interfaces with external or loose supplied system , electrical items for connectorisation termination lugs glands etc , first submission on binding drawing , documentation hard copy , documentation softy copy , ietm documentation , service of service engineer , preservation and de preservation , commissioning spares , on boards spares , standard and special tools , training and training material

State Government

CTN :39984717

18 Apr, 2025 NA

Calcutta - West Bengal

Tender For supply of following items for setting up measurement and instrumentation lab for 4 year b.tech in electrical engineering curriculum and application for university of calcutta. - experimental set-up for calibration of a wattmeter using dc potentiometer with following features/items:regulated power supply 2 volts, 100 ma to operate the potentiometer.calibrated electronic standard cell voltage 1.0186 volts.regulated power supply 0-5 volts/0.5 amps with milliammeter 0- 500ma for current coil of wattmeter.regulated high voltage power supply 0-250 dc volts with voltmeter 0-250 volts for pressure coil of wattmeter.a panel mounting wattmeter 0-125 watt is required to perform the experimentgalvanometer for null balance.a volt ratio box for measurement of higher voltage.complete circuit diagram with wattmeter connections to be provided on the front panel of the instrument.with standard accessories, experimental set-up for low resistance measurement using kelvin s double bridge with following features:range: 0.2 micro ohm to 11 ohms, with an accuracy of 0.05 %required accessories:spot reflecting galvanometer. dc source 10 a with one analog current meter. attachment of 1 meter length.brass clamp with terminals for zero setting. with standard accessories, experimental set up for unknown capacitance measurement using de-sauty s bridge with following specifications:source: sine wave signal of 1khz. the amplitude of ac switch indicating lamp is provided on the bakelite board. two sockets are to be provided for the output of ac signals.detector: for detecting small ac signals in the output, null detector is required as in-built with digital display.circuit diagram:the circuit layout on the board is to be provided out to facilitate convenient working. 4 or 5 mm socket required for making connection. features:r2 --- three decade resistance dials having value 10 1000, 10 100 and 10 10 ohmsr1 ---- single decade resistance dial having value 10 100 ohmsc1 ---- unknown capacitor.c2 ---- two fixed standard capacitors having value 0.01mfd 0.1mfd (loss free)with standard accessories, experimental set-up for calibration of a 1-phase watt-hour meter with following scopes: to adjust & calibrate a single-phase energy meter by direct loading method to adjust & calibrate a single-phase energy meter by comparing with a sub-standard meterspecifications: static energy meter single phase: under test (local) duly mounted, wired and terminated static energy meter single phase: sub-standard meter (isi mark) duly mounted, wired and terminated voltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v ac ammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a ac wattmeter: dynamometer type ac single phase, multi-range with current coil 5 / 10 amp and potential coil 75 / 150 / 300 v ac variac: variable voltage transformer (portable table / floor mounting type with enclosure) input: 230v ac and output: 0 270v / 8 amp ac variable load: made up of 3 load resistors of 70 ohms / 700 w each duly mounted and connected / terminated to form different loads (35 to 210 ohms) as per external connections digital stop clock: portable with start / stop & reset operation set of necessary 4 mm spring loaded patch cords for interconnections detailed instruction manual supply to be connected: 230v, 1phase, 50 hz, ac mains, experimental set-up for calibration of a 3-phase watt hour meter with following specifications: to adjust & calibrate a three-phase energy meter by direct loading method to adjust & calibrate a three-phase energy meter by comparing with a sub-standard meterspecifications:static energy meter three phase: under test (local) duly mounted, wired and terminatedstatic energy meter three phase: sub-standard meter (isi mark) duly mounted, wired and terminatedvoltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v acammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a acwattmeter:

Central Government/Public Sector

CTN :39946355

21 Apr, 2025 NA

Goa - Goa

Tender For supply of dirty oil pump with motor all accessories , local control panel , gauge assembly board with suction and discharge pressure gauge pipes isolation cocks etc. , loose fittings and instrumentation , shock mounts with center and side holding down fasteners , flexible pipes i bellows for all equipment interfaces with external loose supplied system , electrical items for connectorisation termination cable gland lugs etc , first submission of binding drawing as per sotr , documentation hard copy , documentation soft copy , ietm documentation , service of service engineer 20 mandays with 8 sorties , preservatives and de preservatives , commissioning spares as per sotr , onboard spares as per sotr , standard and special tools as per sotr , training and training material as per sotr , service of service engineer 15 mandays with 6 sorties

CTN :39964828

23 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of glove box instrumentation panel as per technical specification annexure attached

Central Government/Public Sector

CTN :39762013

17 Apr, 2025 1.03 Crore

Udyogamandal - Kerala

Tender For corrigendum : supply erection commissioning and performance testing of instrumentation and automation package - supply of pac 9074crio9067 details as per sl no 1 in boq , supply of di 329425 with accessories details as per sl no 2 in boq , supply of do 329476 with accessories details as per sl no 3 in boq , supply of ai 169208 with accessories details as per sl no 4 in boq , supply of ao 49265 with accessories details as per sl no 5 in boq , supply of magnetic flow meter details as per sl no 6 in boq , supply of digital rotameter details as per sl no 7 in boq , supply of radar level transmitter details as per sl no 8 in boq , supply of 3kva online ups with battery details as per sl no 9 in boq , supply of frp cable tray details as per sl no 10 in boq , supply of high end computer details as per sl no 11 in boq , supply of control cable 24 c x 1sq mm details as per sl no 12 in boq , supply of control 12pair x 1sq mm details as per sl no 13 in boq , supply of control cable 12 c x 1sq mm details as per sl no 14 in boq , supply of control 1pair x 1sq mm details as per sl no 15 in boq , supply of thermoplastic junction box details as per sl no 16 in boq , supply of thermoplastic junction box details as per sl no 17 in boq , supply of control relays with base 24v dc coil details as per sl no 18 in boq , supply of control relays with base 230v ac coil details as per sl no 19 in boq , supply of miscellaneous items details as per sl no 20 in boq , supply of plc cum computer console details as per sl no 21 in boq , supply of computer chair details as per sl no 22 in boq , supply of structural material details as per sl no 23 in boq , supply and installation of hdpe pipe details as per sl no 24 in boq , labour charge for erection and commissioning of pac 9074crio9067 details as per sl no 25 in boq , labour charge for erection and commissioning of di 329425 with accessories details as per sl no 26 in boq , labour charge for erection and commissioning of do 329476 with accessories details as per sl no 27 in boq , labour charge for erection and commissioning of ai 169208 with accessories details as per sl no 28 in boq , labour charge for erection and commissioning of ao 49265 with accessories details as per sl no 29 in boq , labour charge for erection and commissioning of magnetic flow meter details as per sl no 30 in boq , labour charge for erection and commissioning of digital rotameter details as per sl no 31 in boq , labour charge for erection and commissioning of radar level transmitter details as per sl no 32 in boq , labour charge for erection and commissioning of 3kva online ups details as per sl no 33 in boq , labour charge for laying fixing erection of frp cable tray details as per sl no 34 in boq , labour charge for laying glanding details as per sl no 35 in boq , labour charge for laying glanding details as per sl no 36 in boq , labour charge for laying glanding details as per sl no 37 in boq , labour charge for laying glanding details as per sl no 38 in boq , labour charge for erection and commissioning of thermoplastic junction box details as per sl no 39 in boq , labour charge for erection and commissioning of thermoplastic junction box details as per sl no 40 in boq , labour charge for erection and commissioning of control relays with base details as per sl no 41 in boq , labour charge for erection and commissioning of control relays with base details as per sl no 42 in boq , labour charge for erection and commissioning of plc panel with computer console details as per sl no 43 in boq , labour charge for erection and commissioning of high end computer details as per sl no 44 in boq , labour charge for structure works details as per sl no 45 in boq , labour charge for installation of hdpe pipe details as per sl no 46 in boq , labour charge for software programming details as per sl no 47 in boq

Auto Control Panel Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector