Tender For supply of magnetic nut part no x00024682 xt5710100007 , hex screw part no 304017008083 , hex screw part no 000000003191 , hex screw part no 000000003196 , plate spring part no 002093020100 , sealing ring part no 007603012115 , copper sealing ring part no 007603018101 , o ring part no 0259979248 , o ring part no 0269973448 , o ring part no 0299972848 , piston ring part no 5120850560 xt5610100125 , o ring part no 700429058001 x56910100118 , wire part no x52499100049 , washer part no 8379902340 , hex screw part no 000931010281 , washer a cop part no 007603036101 , o ring part no 8599970053 , o ring part no x00024149 , o ring part no x00024164 , set of wear parts for 2 by 2 way valve part no x00024248 , o ring part no x00024256 , o ring part no xp56907700015 , washer part no 5680160076 , copper sealing ring, seal ring part no 007603016105 , repair kit part no 8695860174 , wear parts kit part no x00024204 , o ring part no 700429017002 , o ring part no 700429023002 , o ring part no 700429028002 , o ring part no 700429033000 , o ring part no 700429050003 , o ring part no 700429055001 , o ring part no 700429060001 , o ring part no 700429085002 , o ring part no 700429100001 , o ring part no 700429105001 , o ring part no 700429110000 , o ring part n. 700429115002 , o ring part no 700429120001 , o ring part no 700429200001 , spacer part no 735151008100 , o ring part no 700429029000 , o ring part no 700429030003 , o ring part no 700429034001 , o ring part no 700429065002 , washer part no x00010430 , thrust bearing part no 5120200812 , restrictor valve part no x00024087 , safety valve part no x00023946 ) /bid number : gem/2026/b/7370877 * /dated: 12-05-2026 & & / bid document 1 / 42
Tender For providing of custom bid for services - service contract for in situ repair of high pressure valve safety valve hpbp lpbp valve butterfly valve for tg area in 5x660mw unit at ntpc barh
Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.
Tender For tender for supply of refilling of hydrogen cylinders , hydrotest of hydrogen cylinders including testing of cylinder valves with test report and repair/replacement of cylinder valves , hydrogen safety valve and pressure regulator , hydrogen filling pipe ( 5 meter each) , transportation ( including pickup , delivery , loading and unloading of cylinders )
Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For supply of 25vkoc001 c c - injector connection assly , injector holding flange assly. , pyrometric duct , expansion below , electronic governor-actuator , flex master con for dia 88.9-epdm , compensation sensor for exh.pyrometric duct , disc spring , piston ring , air valve , set of spare gasket & o rings , o ring dia 3 x dia 290 , o ring dia 3 x dia 260 , special seal , set of spares for abb vtc254 turbocharger , spare part kit for fw/sw heat exchanger , pt 100 converter with two threshold , ferquency preamplifier-engine speed , supply board , flash 64k card , communication module , pcmcia card , 16 analog input card , rtd input filed module , filed communication module , fuse 4a gg 10 38 , thermistor protection relay(aux415v ac) , injecting piping assly , set of seal for glacier filter , plug no4 , 25 cts , pyrometric duct bank b , expansion bellow , floating bush(te) , oil seal (190x160x15) , d/row sph rlr brg (100x165x52) , d/row sph rlr brg (120x180x46) , cap screw , portable temperature simulator 0-600 deg celcius , disc spring , release spring , gt2 coalescer filter panel , seal tape roll , barring gear assly - gali , type - gd , loctite 480 , crankcase pressure measurement assly , o ring , drilled cap plug - dn 12 , connecting straub metal grip d42 4 epdm , adjusting screw , injector tappet , gasket , injection pipe , o ring , p2-p4 by pass valve-gachot-dn125 , seal ring chord , expansion bellow , metallic gasket , cartridge , v band clamping , lub oil filling connection , rubber compensator , rubber compensator g0125 x 130 x 016 hks-g nbr gr deb , rubber compensator g0100 x 130 x 016 hks-g nbr gr deb , clamping collar , expansion bellows , metallic joint , o ring an 30 , 21a7 , gasket for lub oilcooler (nopv) , channel plate gasket , engine inlet thermostic valve , o ring , disc spring washer dia.56xdia.28.5x3 , disc spring washer dia.40xdia.21.5x2 , temperature sensor , silencer pads (fx4000) , lid seal for fx4000 , hex bolt , hex bolt , time delay relay(on delay) , elelctrical connnection laptop-engine controller , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , flex hose , repair kit for gali starter , set of seal for gali starter , solenoid valve-24v , main bearing assly , gasket , gasket , o ring , gasket , seal , impeller , 2 lips oil seal , bearing , mechanical seal eagle , o ring , bearing , cap plug , injector sleeve , o rind- ms 29513/238 , v 75 e , o ring - kalrez , inlet valve guide , gasket exhaust manifod , valve seat metallic ring , inlet valve , exhaust valve , rocker arm bush , metallic joint , rocker cover screw , piston ring - top - chrome , ceramique , piston ring - compression-g3-chrome , piston , gasket , set of gasket for hyd. motor , connecting axiflex metal gripd168.3 , epdm , gasket , service tool kit for oil mist detector , exhaust temperature sensor , o ring - ms29513/230 , 60c7 , o ring an26 , 60c7 , nozzle assly -9 x 0.52 x 148 , helicoflex joint hn100 , d17.4 1.8mm , sea water pump , joint type c with limiter , metallic joint , tc speed sensor , gasket rc , o ring d54 , 50x3 v70d , o ring an29 , 21a7 , gasket , hose , metallic joint , set of spares for air valve and actuator , set of spares for p2/p4 bypass valve , actuator service kit , fresh water temp sensor (rtd) , coupling assly cw , connecting cable (unitel way) , analog input field module type 170aaio3000+slave 170fnt11001 , lamp , hooter (electronic) , power switch , fuse 10x38 2a gg , pt 100 converter with two threshold , solenoid valve-safety stop , power fuse , 32a , rsp bearing safety card , icm safety stop card (4 channel) , frequency preamplifier (engine speed) , human machine interface , main bearing temp probe , connecting rod bearing temp probe , washer bsf , ring for casing , bushing
Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.