Latest auto electrical item Tenders | Government auto electrical item Tenders

CTN :45693900

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of automobile trainers and equipment at consignee locations. (tender ref no.26008/2026-27) - light motor vehicle driving simulator, injector -multi hole type, pintle type, petrol engine - 2 stroke, motor cycle/ scooter, injector cleaning unit, injector testing set (hand tester), fuel feed pump for diesel, fuel injection pump - diesel - inline, fuel injection pump - dismantling tool kit, fuel injection pump - distributor fuel rotary pump with standard accessories, fuel injection pump - ve pump with standard accessories, cylinder liner- dry & wet liner, cylinder liner - press fit & slide fit, steering assembly - rack and pinion, air brake trainer assembly, alternator assembly - lmv, engine bearing model set, piston model set, front axle assembly, rzeeppa joint with stand for dismantling and assembly, full floating axle and semi floating axle assembly, wiper motor assembly, cut section model - 4 cylinder diesel engine, cut section model - automatic transmission gear box, cut section model - centrifugal clutch assembly, cut section model - diaphragm clutch assembly, cut section model - radiator - cross flow, cut section model - radiator - down flow, cut section model - shock absorbers, cut section model - single plate clutch assembly, cut section model - turbocharger, demonstration board - anti theft device car, automotive safety air bag simulator, car air conditioner trainer, demonstration board - crdi system, demonstration board - electronic ignition system and ignition coil, disk brake trainer, drum brake trainer, working model - power windows, working model - torque converter, denting kit set, engine compression tester (diesel), two post car lift- capacity 4 ton, electric operated, radiator pressure tester, tyre changer machine, tyre air pressure gauge with holding nipple, wheel alignment machince computerized 3d, wheel balancing machine (for wheel balancing of lmv), air conditioning service unit - car, automotive battery charger, automotive battery tester/ analyser, battery terminal cleaner tool, air blow gun, air impact wrench with impact sockets, engineers stethoscope, grease gun - 500 grams, oil can 500 ml, oil filter wrench - upto 500 mm, piston ring compressor - 50 - 100 mm, piston ring expander and remover - 50 - 100 mm, piston ring groove cleaner, belt tensioner gauge, car jet washer with standard accessories, auto electrical work bench, gloves: rubber, gloves: cotton, industrial/ safety shoes, industrial helmet, blow lamp: 0.5 liter, magnifying glass: 75 mm, lifting tackle/ sling: 1 ton, 2 meters, laser distance measuring instrument, demonstration board: electric vehicle cooling system, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, electric vehicle diagnostic scanner, solar based charging system, electric vehicle tool kit, electrically insulating blanket, clamps for insulating blanket, insulated rubber mats, gloves: electrically insulated, industrial/ safety shoes: electrically insulated, glove inflator kit, goggle: white glass, ac current digital clamp meter, digital continuity tester, soldering iron set: mechanic electric vehicle

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45689667

16 Jul, 2026 NA

East Singhbhum - Jharkhand

Tender For providing of repair and overhauling service - cars; overhauling of auto- electrical items of motor garage vehicles; no; service provider premises

corporations/Associations/Others

CTN :45637062

25 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For scrap vehicles sales for dharmapuri region - scraped-all ms angles cut pieces and seat frames pieces, scraped g.i.sheet & cut pieces, scraped-used waste engine oil 210 ltr with barrel, scraped 210 ltr empty closed metal barrel, scraped - 182 kgs empty open metal barrel, scraped 200 ltr empty tyre plant barrel, scraped - 210 ltr capacity empty plastic barrel, scraped - gear wheel & shaft, scraped bearing & cone, scraped - clutch plate, scraped-all types of filter(1.090mt), scraped - brake lining & clutch facing(56.642mt), scaped-auto electrical item, scaped -bus wheel disc with ring, scaped computer & printer items 1.thcl- p iv -2.8 ghz -5nos 2.hp- piv- 3.8 ghz -3nos 3.ccs-piv-2.66 quad -4nos 4.hcl -intel core p55 2.66 ghz -5nos printer items 1.tvs hd 245 gold (dot matrix) -6nos 2.tvs hd 245 gold (dot matrix) -9nos 3.tvs msp 455 xl classic(dot matrix)-6nos 4.epson lq1310 classic (dot matrix)-15nos 5. epson l405 inkjet 1no, scraped 12v 21p monolid battery (150ah), scraped 12v 25p monolid battery (180ah), scraped 12v 27p monolid battery (200ah), scraped - frp cowl material(4.445mt), scraped all rubber bed oil seels, fan belts & rubber items, scraped tyre buffing dust at rc unit, scraped-10.00 x20 radial tyre at rc unit, scraped 295/80r/22.5 tube less radial tyres at rc unit, scraped-10.00x20 tube with mouth at rc unit, scraped-10.00x20 curing envelopes at rc unit, scraped-10.00x20 tube cut pieces at rc unit, scraped-converted from bonder (2 tyre electric chamber) at rc unit, scraped-2 tyre electric chamber) at rc unit, scraped tyre buffing machine at rc unit, scraped tyre building machine at rc unit, scraped tyre repair spreader at rc unit, scraped tyre curing rim at rc unit, scaped-ply wood(3.793mt), scaped-fly wheel with ring

Central Government/Public Sector

CTN :45555987

08 Jul, 2026 NA

Palakkad - Kerala

Tender For high pressure jet cleaning machine working pressure: 200-250 bar water flow rate: 900-1100 liters/hour steam temperature (if applicable): 140-155 degree celsius hot water output temperature: 85-90 degree celsius suction height (from water source): minimum 0.5 m pump specifications critical for durability and pressure stability. pump type: triplex plunger pump pump speed: around 1450 rpm number of pistons: 3 piston material: ceramic minimum feed pressure: 6-8 bar motor & electrical specificationsdefines power and efficiency. power supply: electrical phase: single phase / three phase motor rating: around 7-7.5 kw protection class: ipx5 or higher automatic pressure cut-off: yes heating system (for hot water models) optional but essential for grease removal. burner type: diesel / electric burner power: 60-90 kwfuel tank capacity: around 20 liters detergent tank capacity: around 20 liters hose, gun & lance user interaction components. high-pressure hose length: 8-10 meters electrical cable length: 5 meters spray lance length: approx. 700 mm spray gun: standard high-pressure trigger gun quick-connect couplings: preferred construction & materials ensures robustness and long service life. chassis material: mild steel (industrial grade) body material: mild steel or corrosion-resistant metal wheels: solid rubber wheels frame design: compact, vibration-resistant safety & protection features mandatory for industrial equipment. thermal motor protection pressure relief valve overload protection weather-proof switches low-water cut-off (recommended) dimensions & weight affects portability and storage. weight (without accessories): 140?150 kg mobility: trolley-mounted with heavy-duty wheels accessories (standard supply) high-pressure hose spray gunspray lance nozzle set detergent suction hose operating conditions operating temperature range: 0 degree celsius to 40 degree celsius environment: dusty, humid, industrial conditions [ warranty period: 30 months after the date of delivery ] ]

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

corporations/Associations/Others

CTN :45097943

15 Jun, 2026 2.08 Crore

Bangalore - Karnataka

Tender For corrigendum : procurement of auto electrical items. - starter switch, starter bs6, ae-sre bearing, de bracket bs6 ll, plug moulding assly, rectifier-26217040, bearing assly kit, pully assly kit bs6, cover moulding, regulator assy-26218584, pully bs6 tvs ll, ae-protective cap, regulator assy-727220742, stator-1986ae3238, ae-rectifier, rotor bearing, rotor bs6 ll, def bedaring, d.e.f, pullly, aramture assly kit bs6, ce braket bs6, brush gear assly, field coil bs6, ae-inter bracket assly, fastners assly, engganing lever, drive assly bs6, cable assly bs6ll, relay assly bs6 ll, ae-fixing bracket, solonoid switch bs6, starter armature bs6, trax screw, bearing pedastal, ae-commutator end shield, solonoid switch assly, armature bs6 leyland, fork lever bs6 leyland, drive end shield assly bs6 ll, starter frame (pole housing) ll bs6, starter assly bs6 bosch, rotor assy eicher bs iv, alternator bsiv eicher, ae-solenoid assy bsiv midi, ae-engaging lever and suport assy bsiv midi, ae-drive assy bsiv ley midi, ae-fixing bracket assy bsiv ley midi, op shaft assly, ae-field coil assy bsiv ley midi, ae-armature and bearing assy bsiv ley midi, ae-brush gear assy bsiv ley midi, ae-inter bracket assy kit bsiv ley midi, pinion assly kit, ae-planetary gear assy bsiv ley midi, terminal base and spindle assy kit bsiv, thrust washer bsiv, solenoid switch bsiii, sre bracket assy bsiii, ae-rotor assy, rotor assy bsiii-26221780, solenoid switch 24v relay, ae-rectifier assly bsiii, pole screw bsii, lever and peg assy-engaging lever tc, ae-lead assly bsiii, insul bush bsi, drive assy bsiii ll 26242815, ae-de bearing assy kit bsiii, ae-de bearing assembling kit, brush gear assy bsiii, ae-brush set bsiii, ae-bolt, ae-blade fuse 5 amps bsiii, blade fuse 20amps bsiii, blade fuse 15 amps bsiii, blade fuse 10 amps bsiii-iv, ae-bearing bush assembling kit, ae-armature assy bsiii, ae-armature assemblg kit, sol switch midi bs iv, ae-field coil bsiii, protective cap-f000bl15674av, ae-de bush, ae-rotor assembly bs4, ae-stator, ae-rotor, rectifier, overrunning-clutch drive, pole housing, starting relay, ae-solenoid switch, planetary gear train, pole housing-f002g703394av, retaining washer, ae-rectifier bsiii, stator-26220610, ae-sre bracket, rotor assy. midi tata, ae-drive assy midi tata, ce bracket, brush gear assy 26256379-f00h51021, ae-armature, ae-drive assy bsiv tata, fixing bracket assy 1616 egr, starter roller bearing, pole screw tc, drive bearing, commutator end shield, pole housing 1512 bs iv starter, orc drive eicher bs iv, planetary gear train-f002g20727, ae-sealing kit, fastners assy kit, ae-c e bracket assy midi, ae-brush gear midi, ae-field coil assy ultra midi bs iv, ae-fixing bracket assy midi, ae-armature midi, solenoid switch bs iv, ae-stator assy bsiii, sealing cap 1512 bs iv starter, starting relay 1512 bs iv starter, solenoid switch 1512 bs iv starter, ae-drive bearing 1512 bs iv starter, ae-commutator end shield 1512 bs iv starter, armature 1512 bs iv starter, overrunning-clutch drive 1512 bs iv starter, pole housing eicherbs iv starter, el field regulator 1512 bs iv alternator, stator 1512 bs iv alternator, solenoid switch 697di bsiv, ae-filed coil, sre bearing -6201, ae-solenoid switch assy, rotor assy bsiii-26220610, ae-regulator assy, rectifier assy bsiii-26218426, ae-planetary gear assy bsiv, ae-output shaft assy bsiv, ae-lever assy bsii bsiii, jump ring bsii, inter bracket and bearing assy, brush gear assy bsiv, fitting ring bsiv, ae-field coil assly bsiv, engaging lever bsiv, el field rheostat 1616 bs iv f00ma45251-1986ae01034s8, ae-drive assembly bs iv, ae-armature and bearing assembly bsiv, ae-armature assy

State Government

CTN :45353592

17 Jun, 2026 NA

West Nimar - Madhya Pradesh

Tender For rate contract of equipment maintenance items - computer parts, mother board acer/dell/hp/lenovo, graphic card 4 gb, ssd 128 gb, ssd 256 gb, ssd 512 gb, ssd 1 tb, smps acer cpu, smps dell cpu, smps hp cpu, smps lenovo cpu, ram (ddr 3) 4 gb, ram (ddr 3) 8 gb, ram (ddr 3) 16 gb, ram (ddr 4) 4 gb, ram (ddr 4) 8 gb, ram (ddr 4) 16 gb, computer format driver and software instolation, vga cable 3 miter, power cable 1.50 miter, hdmi 5 miter, hdmi 1.50 miter, usb extention cable, usb hub, lcd powr supply change, lcd vga port change, cpu fan, cmos battery, cabinet / case, wi-fi card, hdmi / displayport, lan port, all moitor display change, mother board power ic change, mother board display ic change, all mother board repair, normal power supply repair, acer/dell/hp/lenovo branded power supply repair, mouse pad, hdd 128 gb enternal, hdd 256 gb enternal, hdd 512 gb enternal, hdd 1 tb enternal, hard disk (usb) 3.0 1tb seagate/wd external, hard disk (usb) 3.0 2tb seagate/wd external, hard disk (usb) 3.0 3tb seagate/wd external, hard disk (usb) 3.0 4tb seagate/wd external, hard disk (usb) 3.0 5tb seagate/wd external, window 10 pro full package license, window 11 pro full package license, ms office 2021 pro package license, ms office 2024 pro package license, service charge, all in one computer parts, mother board interl chip change, power supply change, smps change, hard disk 2 tb, hard disk 500 gb, nvme ssd 256 gb, nvme ssd 128 gb, all all in one repair, all all in one display change, ram 4 gb, ram 8 gb, ram 16 gb, ram 32 gb, ssd 128 gb, ssd 256 gb, ssd 512 gb, ssd m2- 128 gb, ssd m2- 256 gb, ssd m2- 512 gb, service charge, canon/hp/brother printer etc. repairs and parts change, hvt, logic card, logic board, all printer power supply, perssour roller, paper picup rod change, pikup roller cluch, fuser assembly, fuser strip, fuser, scanner, scanner glass, scanner lamp, laser scanner unit, gear assambly, teflon, pick up rollar assamblay, tank change inkjet printer, all printer power supply repair, tray rollar, drum, drum unit, pcr, megnet rod, chip, arthing cencer, blade change, toner refling all printer, power supply, feed roller, separation pad, paper tray, exit roller, heat roller, usb / network port, adf (auto document feeder), display panel, sensors, service charge, hp/acer laptop and repars parts change, power adaptor, mother board, battary, body, screen, laptop format driver and software instalation, all laptop repair, mother board, keyboard, touchpad, hinges, processor (cpu), webcam, service charge, foxin/bpe line/zebronic/uniline interactive/arrow/smtek/microtek etc. parts change and repair, 7 ah 12 vott. battary change, 26 ah 12 vott battary change, 42 ah 12 vott. barrary change, pcb bard, ups repair, power supply, transformer, sensors, display panel, capacitors, cooling fan, fuse / mcb, input / output terminal, 12v battery, service charge, canon/sharp/toshiba/hp/konica photocoy machine a3 printer parts change and repair, fuser, fuser unit, heat roller, pressure roller, heater lamp, thermistor, fuser film, scanner, scanner glass, scanner motor, ccd/scanner sensor, scanner lamp, mirrors & lens, leser unit, cluch, regestration cluch, pcr, dr blead, wiper blead, magnet, gear, gear unit, main motor, drum unit, opc drum, drum shaft, cleaning blade, developer unit, toner hopper, pickup roller, feed roller, separation pad, paper tray / cassette, delivery tray, smps / power supply, main board (pcb), display panel, sensors, motors & gears, adf (auto document feeder), drum cleaning blade, charge roller, transfer roller, transfer belt, developer, adf roller, charge corona unit, duplex unit, finisher unit, cooling fan, touch display panel, service charge, epson scanner parts change and repair, adf unit, input tray, input tray extension, output tray, output tray extension, edge guides, paper stopper, pickup roller, separation roller, feed roller, exit roller, cis sensor (contact image sensor), scanner glass, led lamp, scan head, calibratio

CTN :45326597

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for plc lab in eee department - list of equipment, plc tranier kitfor basic laboratory use allen-bradley\ delta plc, siemens or equivalant,(,8-20 digital inputs, 6-12 digital outputs (led/relay indicators). toggle switches, analog pots, proximity sensors, and rs232/usb communication.power supply: built-in 24v dc / 230v ac.software: ladder diagram programming software, dol starter interfacing kit 415v ac (3-phase), 5hp, 15 - 25a, star delta starter interfacing kit415v ac (3-phase), 5hp, 15 - 25a, conveyor arrangement with siren12v dc, 24v dc, or 230v ac. manual / auto,conveyor, proximity sensor, start/ stop push buttons, siren,geared dc motor, plc based counting of moving objects on two conveyorstwo numbers of feed conveyors,fwd/ rev logic ,promity sensors - 2 nos, start & stop buttons, display unit, 3 floor lift interfacing modelthree stage( gnd + 2 floors), start & stop atevery stage, over load limit control

corporations/Associations/Others

CTN :45287797

27 May, 2026 NA

Dharmapuri - Tamil Nadu

Tender For disposal of scrap - scraped- aluminium body item & cut pieces, scraped-all ms angles cut pieces and seat frames pieces, scraped g.i.sheet & cut pieces, scraped-used waste engine oil 210 ltr with barrel, scraped spring leafes with clamp and without clamp, scraped 210 ltr empty closed metal barrel, scraped - 182 kgs empty open metal barrel, scraped 200 ltr empty tyre plant barrel, scraped - 210 ltr capacity empty plastic barrel, scraped - gear wheel & shaft, scraped - aluminium piston and aluminium item, scraped bearing & cone, scraped brass rivet and brass item, scraped- hanger & shackle, scraped- brake drum & cylinder liner, scraped - clutch plate, scraped-all types of filter(2.248mt), scraped - brake lining & clutch facing(56.202mt), scaped-auto electrical item, scaped -bus wheel disc with out ring, scraped-all auto steel spares & spring buses bolt nut item, scaped computer & printer items 1.thcl- p iv -2.8 ghz -5nos 2.hp- piv- 3.8 ghz -3nos 3.ccs-piv-2.66 quad -4nos 4.hcl -intel core p55 2.66 ghz -5nos printer items 1.tvs hd 245 gold (dot matrix) -6nos 2.tvs hd 245 gold (dot matrix) -9nos 3.tvs msp 455 xl classic(dot matrix)-6nos 4.epson lq1310 classic (dot matrix)-15nos 5. epson l405 inkjet 1no, scraped 12v 21p monolid battery (150ah), scraped 12v 25p monolid battery (180ah), scraped - frp cowl material(4.445mt), scraped all rubber bed oil seels, fan belts & rubber items, scraped tyre buffing dust at rc unit, scraped-10.00 x20 radial tyre at rc unit, scraped 295/80r/22.5 tube less radial tyres at rc unit, scaped-10.00x20 tube with mouth at rc unit, scaped-flaps ,flap cut pieces, scaped-10.00x20 tube cut pieces at rc unit, tn29/n2773 cond.scrap of bus body shell with damaged 1 pass seat frame assy.-7 nos, 2 pass seat frame assy. -5 nos, 3.hat track 2nos as it is condition, tn29/n2766 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -7 nos, 4.hat track 2no as it is condition, tn29/n2832 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2nos as it is condition, tn30/n1615 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2no as it is condition, tn29/n2757 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-7 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, tn29/n2750 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, scaped-new chassis cabin, scaped-ply wood(3.793mt), scaped-fly wheel with ring

Auto Electrical Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others