Latest auto gauging system Tenders | Government auto gauging system Tenders

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45731119

06 Jul, 2026 NA

Ranipet - Tamil Nadu

Tender For supply of cbc gauges of wagon. 1 set consist of (1) contour worn limit gauge (2)contour worn limit gauge (sick line limit gauge) (3) knuckle nose wear & stretch limit gauge (4) guard arm distortion gauge with feeler gauge the drawing of cbc gauges is attached. make: pie/ ganapathy industries / prasad or similar.as per attached specification [ warranty period: 30 months after the date of delivery ] ]

Co-operative

CTN :45715046

06 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For supply of re-non authorized suppliers - "bearing hose pipe with connector ,din-20022-en853-isn-1/4""-06mm- w.p.-225 bar/3270psi-4q2012 make - polylex" , cane unloader bridge wheel as per drg. bssuk/mh/821/16 (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader trolley wheel as per sample (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader bridge wheel gear as per drg. no. bssuk/mh/832/16 moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , "pinion unloader no. 1 & 2 bssuk drg. no. u-1 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 1 & 2 bssuk drg. no. u-2 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "big gear unloader no. 1 &2 bssuk drg. no. u-03 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 3 bssuk drg. no. u-4 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-6 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-8 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-10 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-12 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-20 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-30 mm make-champion/spitman , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 03mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 06 mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 08mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 10mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 12mm make - champion/spitman" , "low pressure joint sheet size - 1.5mm style - 20 make -champion/spitman" , "low pressure joint sheet size - 3mm style - 20 make - champion/spitman" , "low pressure joint sheet size - 5 mm style - 20 make - champion/spitman" , "h.p. metallic steam joint 1.5mm style - 54 super make - champion/spitman" , "h.p. metallic steam joint 3 mm style - 54 super make - champion/spitman/ ferrolite" , "h.p. metallic steam joint 5 mm style - 54 super make - champion/spitman/ ferrolite" , rubber joint sheet size-2mtr x 2 mtr. , "wire rope cuppi 2 wear(way) make - heavy duty" , "wire rope cuppi 1 wear(way) make - heavy duty" , "gauge glass a-9 (with mica & gaskit set) make - klinger" , spiral joint 308x 275x 5mm moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 342x310x5mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 255x395x3mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 154x245x3mm, mmoc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 248x218x5mm,moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 220x242x3 moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 310x340x5moc-s.s 316/nicle alloys(inconel 625) make - i

CTN :45728383

17 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of tread wear measuring gauge. detail specification as per annexure. [ warranty period: 30 months after the date of delivery ] ]

CTN :45728215

10 Jul, 2026 NA

Jamshedpur - Jharkhand

Tender For supply of set of e-type cbc gauge as per rdso g -76 manual. a set consist of 03 items 03 nos as follows: - (1) contour worn limit gauge no. 1 as per rdso g-76 manual appendix - 3a, qty-01 no. (2) contourworn limit gauge no. 2 as per rdso g-76 manual appendix - 3b, qty-01 no. (3) knuckle stretch and nose wear gauge no. 3 as per rdso g -76 manual appendix - 3c, qty-01 no. hardness of material- 40/45 hrc minimum. make: ganpati or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45727807

30 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of flange wear & root wear gauge electronic digital display & least count of 0.01 mm, suitable for bg locomotive, set consists of two items as follows:- 1) flange wear gauge 01 no/set 2) root wear gauge- 01 no/set make jyoti/paragoan or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45709681

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply of one set consisting of following gauges- sr. no.1 : grease seal od ovaility checking gauge- gauge description - base plate diameter 300mm with basic accessories, dial indicator and od master gauge.(i) for measurement of od 209.187 at 6mm height for timken drg. no. e-58606 (hdl seal). (ii) for measurement of od 209.75 at 6mm height for skf drg. no. se-bt2-8515 d-23 (skf seal). (iii) od master gauge : od 209.78mm, with nabl calibration. (iv) digital dial indicator, model: 543-700, least count: 0.01mm, travel: 0-12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. sr. no.2 : seal wear ring id ovaility checking gauge- gauge description-base plate diameter 300mm with basic accessories, dial indicatorand id master gauge. (i) for measurement of id 144.42 at 10mm height for timken drg. no. b-204944 (seal wear ring). (ii) for measurement of id 144.419 at 10mm height for neil drg. no. pesd-6075 (wear ringfor 6 x 11 class e ctrb). (iii) for measurement of id 144.45 at 10mm height for timken drg. no.rd-1637504 aa-13 (seal wear ring). (iv) id master ring gauge : id 144.42mm, with nabl calibrated. (v) digital dial indicator, model: 543-781, least count: 0.001mm, travel: 12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government And Public Sector

CTN :45664724

13 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of set of gauges for coupler, one set consisting of following items- (1) lock chamber minimum gauge as per rdso drg. no-wd-84073-s-09-rc, qty - 01 nos. material and specification as per drawing. (2) lock chamber hole gauge as per rdso drg. no -wd-84073-s-10-rc, qty - 01 nos. material and specification as per drawing. (3) pin hole shank wall thickness gauge as per drg. no -rdso- wd-84073-s-18-rc, qty - 01 nos. material and specification as per drawing. (4) butt wear wall thickness gauge as per drg. no-rdso- wd-84073-s-19-rc, qty - 01 nos. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45643401

08 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of wheel profile gauge for b.g. loco as per rdso drg. no. skdl- 3592, alt-6 for measurement of flange wear, root wear, tread wear, tyre thickness, wheel diameter and flat spot measuring gauge, similar to model no. twg-1 (bg loco). note: it must be provided with calibration certificate. [ warranty period:30 months after the date of delivery ] ]

Auto Gauging System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector