Latest auto lock Tenders | Government auto lock Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45519877

16 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing and fixing of various electrical materials and allied office accessories on rental basis at vidhan bhavan porta cabin for mansoon session 2026 in a ward - providing and fixing of various electrical materials and allied office accessories on rental basis at vidhan bhavan porta cabin for mansoon session-2026 in a-ward, pedestal fan, air conditioning, nominal capacity 1.0 tr (3024 kcal / hr. ( 1 indoor unit of 1.0 tr & 1 outdoor unit of 1.0 tr ), computer table-4 x 2 with three drawers, revolving office chair-mid -back, cusion adjustable office revolving executive chairs, plastic chairs-, 3-seater sofa-foam upholstery material: fabric : color : black, led flood light- 150 watt, 20 liter water plastick bucket, waterproof mandap with tarpaulin ( 30 x 20 ) feet- white cotton, jut carpet inside mandap ( 25 x 15 ) sq. ft, office table-4x 2, computer board-6a 5 pin socket - 3 nos.,indicator lamp - 1 no.with switch, long extension board-6a 5 pin socket - 3 nos, indicator lamp-1 no.with switch, 20 liter bisleri jar with tap bottel, table cover: plastic table cover perfect, easily wipes clean. protects your table from damage and staining, fire extinguisher: 2 kg fire extinguisher , isi mark, seamless heavy gauge refrigeration copper piping for vrf/ vrv system in 18 gauge, duly insulated with 13 mm/19 mm thickness. nitrile rubber insulation., printer-monochrome multi function laser-jet, duty cycle : 300000 pages monthly, paper size- a4,copy resoluation-600 dpi, scanner (on rent), laptop-8 gb ddr4 ram/14" (35.6 cm)/windows 11/ms office / wifi / bluetooth / webcam / ntegrated graphics, air conditioning inatallation / dismantling, writing pad-scribbling pad 1/16 - 40 sheets, 80 pages, ball point pens, wi-fi cable, internet connection , dada charges, a4 size 75 gsm paper ream, legal size 75 gsm paper ream, paper glass-disposable ripple glass eco-friendly, safe & hygienic, locking solutions and systems lock with -3 keys, durable door mat-2x 1.5, cotton napkin: cleaning cloth multipurpose napkin - machine washable 12 x 18 inch

CTN :45291930

18 Jun, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For corrigendum : supply of zipper, slide fasteners no. 5, oneway open end single reversible puller, auto lock black 26 inch , zipper, slide fasteners no. 5, one way open end single reversible puller, auto lock black 26.5 inch , zipper, slide fasteners no. 5, one way open end single reversible puller, auto lock black 27 inch , zipper, slide fasteners no. 5, one way open end single reversible puller, auto lock black 23 inch , zipper, slide fasteners no. 5, one way open end single reversible puller, auto lock black 23.5 inch , zipper, slide fasteners no. 5, one way open end single reversible puller, auto lock black 24 inch

Central Government/Public Sector

CTN :45487050

15 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For supply of heavy duty steel almirah for rpf barracks with details specification as - (1)item name-heavy duty steel almirah for rpf barracks.(2) applicable standard is: 3312:2021 for steel wardrobes/cabinets/lockers. (3) material crca steel sheet conforming to is 513 (part-1):2016. (4) type of constructionwelded construction, (5) installation type free standing, (6) number of doors-02 nos. (7) door type hinged type, (8) locking arrangement 3-way locking system with built-in handle and locking arrangement, (9) internal locker one internal locker with separate lock, (10) number of shelves minimum 04 adjustable shelves, (11) hanging arrangement one hanging rod for uniforms/clothes, (12) ventilation ventilation louvers on both sides, finish epoxy polyester powder coated finish, (14) colour grey / olive green / as approved by consignee, (15) height 1980 mm plus minus 20 mm, (16) width 900 mm plus minus 20 mm, (17) depth 480 -500 mm, (18) thickness of side sheet minimum 1.0 mm, (19) thickness of back sheet minimum 1.0 mm, (20)thickness of top & bottom minimum 1.0 mm, (21) thickness of door sheet minimum 0.9 mm, (22) thickness of shelf minimum 0.9 mm, (23) thickness of stiffeners minimum 1.0 mm, (24) hinges heavy duty ms hinges, (25) shelf load capacity minimum 40-50 kg udl per shelf, (26) surface treatment anti-rust chemical treatment before powder coating, (27) powder coating thickness minimum 40-50 microns, (28) workmanship smooth finish, proper welding, no sharp edges/burrs, (29) keys 02 duplicate keys per almirah, (30) marking manufacturer name, month/year of manufacture, (31) warranty as per irs terms and condition,(32) inspection by consignee/railway representative, (33) packing suitable packing to avoid transit damage, (34)delivery at rpf barrack/consignee store [ warranty period: 30 months after the date of delivery ]]

State Government

CTN :45491413

20 Jun, 2026 6.31 Lacs

Ahmedabad - Gujarat

Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at detroj, dist.: ahmedabad.- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items , pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size 100 mm , design & engineering, survey charges

State Government

CTN :45492146

20 Jun, 2026 6.71 Lacs

Ahmedabad - Gujarat

Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at mandal, dist.: ahmedabad.-- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size , design & engineering, survey charges

Central Government/Public Sector

CTN :45474325

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of measuring tape of 5mtr length with magnetic end hook, auto lock, steel blade, unbreakable abs case. make:- freemans or stanley or buildskill or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45390686

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of measuring tape of 5mtr length with magnetic end hook, auto lock, steel blade, unbreakable abs case. make:- freemans or stanley or buildskill or equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45435943

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of mild steel safety suggestion box 12x8x4 inch with pasting of yellow and black line as per sample locking system , first aid box size 13x11x3 inch with glass type door and locking system , target marking batton 6ft long , galvanised metal sheet heavy duty for size 105cmsx50cms with fixing charges , ss sheet cover 6ft x 4ft for oil cleaning machine , name talley of size 16 x 16 inch

CTN :45449207

15 Jun, 2026 NA

Goa - Goa

Tender For supply of 18 mm glass door with locking system for ahoy room size 7ft x 4 ft , 18 mm glass window of ahoy room size 4ft x 4 ft , 12 mm glass shelves size 4ft x 1 ft , vintage brass decorative lantern lamp , wooden mobile locker for auditorium , artficial flower pot

Auto Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector