Tender For supply of chiller spares : : - buzzer of chiller , isolator switch of chiller , plc of chiller , process pump of chiller , recirculation pump of chiller , relay for waterlevel of chiller , rotary switch for process pump of chiller , temperature controller of chiller , ups of chiller , transformer of chiller , discharge valve of chiller , suction valve of chiller , evaporator coil , expansion device of chiller , flow switch for condenser of chiller , flow switch for recirculation pump of chiller , flow switch for process pump of chiller , level indicator of chiller , water cooled condenser of chiller
Tender For the offered equipment is a fiber media converter, model gomc-bi3512-20 or equivalent , designed for conversion between 10/100/1000base-tx copper ethernet and 1000base-fx optical fiber networks. the converter supports ieee 802.3, ieee 802.3u, ieee 802.3ab and ieee 802.3z standards, ensuring compatibility with gigabit ethernet networking applications. it provides one rj45 copper port with auto-negotiation support for 10/100/1000 mbps data rates and one sc type bi-directional fiber port operating at tx 1310nm / rx 1550nm wavelength with transmission distance up to 20 km over single-mode optical fiber. the device supports full duplex flow control and half duplex back pressure for efficient data transmission. led indicators are provided for power, optical link/activity, full duplex status, twisted pair link/activity and transmission rate indication. the converter operates on dc 5v, 1a power supply with optional external or internal power supply configuration and power consumption less than 3w. it is designed to operate in environmental conditions ranging from -10?c to +55?c with storage temperature from -40?c to +85?c and relative humidity from 5% to 95% non-condensing. the unit dimensions are 94mm ? 70mm ? 26mm for external type and 140mm ? 110mm ? 30mm for internal type. the product is suitable for network communication, ftth/fttb/fttx applications, isp backhaul networking and subscriber end connectivity. the equipment complies withce, fcc and rohs certifications. [ warranty period: 36 months after the date of delivery ] ]
Tender For corrigendum : supply of winding temperature indicator with 4 switches 12 meters capillary length with potentiometer , oil temperature indicator with switches 12 meters capillary length with potentiometer , remote winding temperature indicator with 4 sets of contacts , perpex container for breather , propex container for breather 15 mva , bucholze relay , buchholz relay for main conservator for , buchholz relay for service transformer , pressure relief valve , pressure relief device with 2 no contact , magnetic oil gauge , 50 nb manual butterfly valve
Tender For bid to ras corrigendum : supply of supply of field instruments with interfacing modules c c -differential pressure transmitter , temperature transmitters with rtd , temperature transmitter ex proof area , pressure transmitter , smart positioners , active field distributor for profibus pa , field device coupler , interface module
Tender For purchase of lab equipments for ece dept - purchase of lab equipments for ece dept, dc voltmeter (digital) (item code : c006) 1.dcvoltmeteranalog moving coil -(0-10)v, class1.0( 1%full- scale)accuracy - 5 nos2.dcvoltmeteranalog- movingcoil-(0-30)v, class1.0( 1%full-scale)accuracy - 4nos, dc ammeter(item code : c007)specifications: 1. dcammeteranalog movingcoil- (0-30)ma,. 5 nos2. dcammeteranalog -movingcoil -(0-1000) a, class 1.0 ( 1 % full-scale) accuracy - 5 nos, decade capacitance box(item code : c0011)specifications: range: 100 pf to 100 f rotary switch selection with 6 dials. maximum voltage: 350 v. accuracy: 1%., decade inductance box(item code : c0012specifications: range:10 hto10h. rotaryswitchselectionwith6dials. low-lossinductors. accuracy: 1%., 8051 microcontroller kit(item code : c0013)specifications: operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) (item code : c0014)specifications: cpu - lpc2148, core - 16/32 bit arm7tdmi-s speed - max 60 mhz, flash - 512kb, ram (on chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, temperature measurement kit (item code : c0019)specifications: sensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc). display: 3 digit led/lcd digital display (typically 200 mv fsd). temperature source: portable water kettle or heater block. signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntc thermistor probe, k-type thermocouple probe, patch cords and user manual., fpga trainer kit(item code : c0025)specifications: must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb uart bridge, usb cable. user manual.
Tender For corrigendum : supply of non refrigerated centrifuge for general purpose and research (q3) , biosafety cabinet bs 2 , deep freezer -40 degree centigrade , deep freezer -80 degree centigrade , platelet agitator with incubator , refrigerator maintaining a temperature 2 to 6 degree centigrade , water bath for plasma thawing , autoclave machine verticle , plasma expressor , clipper and clips and or dielectric sealer , weighing device , dry rubber balancing material , artery forceps, scissors , insulated blood bag containers
Tender For supply and installation of aerosol based fire fighting equipment at indoor ward, eye ward, blood bank, admin building of sdh, gunupur rayagada vide addition/alterations letter no- 8078 dated. 23.03.2026 of dhso buildings. - supply & installation of 8 gm portable aerosol based automatic fire extinguisher (coverage: 0.008 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 20 gm portable aerosol based automatic fire extinguisher (coverage: 0.2 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 30 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.3 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module.replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 60 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.6 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 100 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 1 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 200 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 2 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including al