Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.
Tender For supply of eee lab items - furniture, 5hp/3.75kw/415v1500rpm three phase(3 )synchronous motor with starting / loading arrangement and with work bench voltage:415v ac/220v dc for field excitation make: benn rating: 5hp/ 3.75kw speed:1500rpm no of poles : 4 synchronous starter dc excitation field current :0.8a digital voltmeter ac(0-500v) moving iron type:01qty digital ammeter ac(0-20a) moving iron type :01qty digital ammeter dc(0-2a) moving coil type :01qty digital power factor meter 600v/10a :01qty 3pole mcb/dc mcb with 20a fuse carrier and supply indicators (three pin plug socket should also be provided) :03qty digital rpm indicator with proximity sensor: 01qty banana connectors for motor/starter/supply outputs :01qty control panel (hylem sheet(5*1.5feet) with ms panel) :01 work bench spec: size: 4feet*3feet*2 1/2 feet height leg teak wood with top 3/4" inch plywood 18mm plywood withone mica sheet for finishing front side cupboard with door open and closed type back side wiring box with door open and closed type, performance of ultrasonic and moisture sensors(5v dc/15ma(40khz/digital output) arduino uno: microcontroller-atmega328p on-board digital sensor components two push button switches and dour leds buck converter and relay for 5v and potentiometer-one each 2x16 liquid crystal oscillator(lcd) and mini bread-one each onboard digital sensor modules: ultrasonic sensor module(3cm-100cm) and soil moisture sensor -one each all sensor modules should be mounted on legend size pcb, speed control of ac motor using variable frequency drive(vfd) (0.5hp/415ac/5a(3 )) variable frequency driver (vfd) unit: input voltage:single phase, 230v ac +-10%, 50hz output voltage : three phase output frequency range: 0 to 60hz suitable for 0.75kw motor output current 4.2a vf pattern of spwm control 2pole mcb for on/off control of mains ac voltmeter, ammeter and speed indicator should be provided external stop/start and frequency control should be provided output terminals should be provided and must be brought out in front panel experimental board should be housed in a cabinet with suitable cover three phase induction motor motor type:squirrel cage |rating:0.5hp voltage rating :415v ac speed :1440rpm+-5% insulation : class b/f
Tender For supply of supply & installation of high efficiency water cooling and potable water system of 7-8 stage with cu+zn booster facility and uv lamp with following capacities with water at 15°c cooled from 40°c inlet water at 35°c ambient. evaporator shall be high tank type and shall be insulated. environment friendly refrigerant i.e. hfc r-134 a system shall be sealed and refrigerant shall be controlled. an adjustable thermostat having an off position shall control refrigeration system. cabinet shall be galvanized steel. cooling unit should be single phase 220 v, 50 hz, with cooling coil, heavy gauge galvanized steel complete as required with 3 nos. faucets. the product should have iso 9001, iso 14001 & bis certification. cooling capacity : 80 ltr/hr. and storage capacity 120 liters
Tender For supply of electronic thermostat w,wire lm353m compatible to machine model- hm270 and hm490, make- ipso , seal assembly grommet for temperature sensor compatible to machine model- hm270, hm490 and hf234, make- ipso , speed detector xs4p12pa340 compatible to machine model- hm270, hm490 and hf234, make- ipso , main print board ps40 230v compatible to machine model- hm270 and hm490, make- ipso , keyboard ps40 220v compatible to machine model- hm270 and hm490, make- ipso , water level switch pressure-1 compatible to machine model- hm270, hm490 and hf234, make- ipso , kit drain valve w,bracket mdb 300 no compatible to machine model- hm270, hm490 and hf234, make- ipso , tilt switch compatible to machine model- hm270 and hm490, make- ipso , water inlet valve compatible to machine model- hm270 and hm490, make- ipso , electrical door lock pkg ele-div-0077 compatible to machine model- hm270 and hm490, make- ipso , computer board micro 20,frequency 230v compatible to machine model- hf234, make- ipso , eprom 27c256 pkg compatible to machine model- hf234, make- ipso , glass fuse 5x20mm f0, 5a,250v compatible to machine model- hf234, make- ipso , emergency button xb4-bs542 red with lock compatible to machine model- hf234, make- ipso , contact for emergency stop compatible to machine model- hf234, make- ipso , thermostat cygnus detector lm35 hf,ww304 compatible to machine model- hf234, make- ipso , tilt switch obl compatible to machine model- hf234, make- ipso , two way inlet valve muller30 plus 50l us-thd 220v compatible to machine model- hf234, make- ipso , solenoid inlet valve muller 220v compatible to machine model- hf234, make- ipso , two way inlet valve muller met 30 plus 50l 220v compatible to machine model- hf234, make- ipso , diaphragm for muller valve 30 plus 50 compatible to machine model- hf234, make- ipso , rotation sensor compatible to machine model- dr55, make- ipso , thermistor compatible to machine model- dr55, make- ipso , cabinet high limit thermostat compatible to machine model- dr55, make- ipso , thermostat lim 340f violet compatible to machine model- dr55, make- ipso , thermostat lim 350f blue compatible to machine model- dr55, make- ipso , air flow switch actuator compatible to machine model- dr55, make- ipso , contactor block for ess compatible to machine model- dr55, make- ipso , door switch snap spst no cherry compatible to machine model- dr55, make- ipso , lint door switch compatible to machine model- dr55, make- ipso , electronic control dx4 compatible to machine model- dr55, make- ipso , temperature sensor for electronic control dx4 compatible to machine model- dr55, make- ipso , drain pipe qui -nca - 0380 for ipso hm490 washing machine , relay board for chemical additon svs
Tender For supply of insulation control 415 volts ac, rated voltage 0-500 v ac, control voltage 24-240 v ac/dc (imr), confirming to rdso spec. rdso/pe/spec/ac/0184-2015 (rev-1) or latest and rdso letter no. el/7.1.108/ mssbc dt. 17.09.2021 or latest, suitable for lhb ac coaches switch board cabinet (s1a07). makes as per the mentioned rdso specification and issued bom vide rdso lr.no el/7.1.108/ mssbc dt. 17.09.2021 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of converter a & b enable control auxiliary contactor with 24v dc coil aux. contact 2no+ 3nc suitable for switch board cabinet for hog compliant lslrd coaches as per rdso specification no. rdso/pe/spec/tl/0195-2019 (rev.-0). [ warranty period: 30 months after the date of delivery ] ]
Tender For insulation monitoring relay 110 v ac, insulation measuring range 1 k ohm to 100k ohm control supply 24-240 v ac/dc, output 1c/o (spdt) contact system leakage capacitance 10 micro farad, place of installation s1a-6, confirming to rdso spec. no.rdso/pe/spec/ac-0184-2015 (rev.1), suitable for lhb type ac coaches switch board cabinet (s1a6),accepted make as per s. no.67 of the common bom list issued vide rdso letter no. el/7.1.108/mssbc dated 17.09.2021 or any other rdso approved make. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of switch board cabinet lhb eog lhb non-ac pantry coach to edts-134, rev-d, amd.1,2, 3, 4 & 5, cor-1 & 2 or latest with additional modification / requirements as per schematic diagram for power & control circuits to drawing no. lwcb/pp7-0-006 alt-g or latest & lwcb/pp-7-2-002 alt-f or latest for amrit bharat rake. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of auxiliary contactor for 415v ok (k-23) contacts: 3 no + 1 nc, control voltage: 168 -300v acconfirming to bom for switchboard cabinet (s1), sr. no. 104 of rdso specification no. rdso/pe/spec/0184-2015(rev-0). [ warranty period: 30 months after the date of delivery ] ]