Latest automotive engine Tenders | Government automotive engine Tenders

CTN :42192038

29 Oct, 2025 NA

East Khasi Hills - Meghalaya

Tender For supply of cctv system with ai based perimeter surveillance d d - 5mp ir network outdoor ptz camera , 5mp ir network outdoor bullet camera , harware for video management software , video management software as base software with fail over mode , camera licence for vms and fail over , ai suit engine with perpetual camera licence , server for ai suit engine , video recording storage , client work station for control and live view , 11.8 feet x 6.5 feet active led with accessories for live view at gdcc , 55 inch led display unit for live view , 24 port layer 2 gigabit managed poe switch with 4x10g sfp and slot and dual power supply and transreceiver , 8 port layer 2gigabit poe swith with 2x1 g sfp slot and trans receiver , 4 port layer 2gigabit poe swith with 2x1 g sfp slot industrial grade and trans receiver , 6 core single mode armoured opticle fibre cable , 24 port fibre patch panel liu with accessories , 12 port fibre patch panel liu with accessories , 3 meter sc lc opticle fibre patch code , cat 6 4 pair shielded twisted pair cable lszh for outdoor purpose , cat 6 rj 45 stp connector , 24 u floor mount network rack at control room , 9 u wall mount network rack , 6 u pole mount rack for out door purpose , galvanised pole 6 mtr for bullet camera , 5 kva online ups with 30 minutes backup , 3 kva online ups with 30 minutes backup , 1 kva online ups with 30 minutes backup , 3 core 2.5 mm electrical cable , 63 amp mcb with socket box for ups end , 16 amp mcb with socket box for rack end , 50 mm gi conduit for outdoor laying purpose , 25 mm pvc conduit for indoor laying purpose , 50 mm high density polyethylene hdpe pipe , out door camera box , route marker for ofc , lightening ) /bid number : gem/2025/b/6683933 * /dated: 08-10-2025 & & / bid document 1 / 47 & & ' ' /item category arrester , digging and refilling of hard and soft soil concrete bricks , laying of high density polyethylene pipe hdpe underground , laying of gi conduit underground , laying of pvc conduit for indoor laying purpose , laying of optical fibre cable through hdpe gi conduit overhead , laying of cat6 stp through hdpe complete , laying of electrical cable throgh hdpe gi conduit overhead , splicing of optical fibre cores , mounting and fixing of gi pole after excavation of saft hard soil , mounting fixing and dressing of lightening arrestor , mounting and fixing of route marker , mounting fixing and dressing of liu , mounting fixing and dressing of floor standing rack , mounting fixing and dressing of wall mouint rack , mounting fixing and dressing of pole mouint rack , mounting and fixing of all type of cameras , mounting fixing installation and configuration of all type of workstation , mounting fixing installation and configuration of all type of switches , mounting fixing installation and configuration of active led display , mounting fixing installation and configuration of all type of standalone display unit , mounting fixing and dressing of mcb , mounting fixing dressing installation and configuration of ups system , mounting fixing dressing installation and configuration of server hardware , installation and configuration of video management software vms , installation and configuration of ai suit engine , mounting fixing dressing installation and configuration of storage hardware , testing commissioning providing three sets of completion diagram documentation of entire project and training to users //bid details 2 / 47

CTN :42186169

28 Oct, 2025 NA

Multi City - Multi State

Tender For item description- 160 kva, 415 v, 3 phsae, liquid cooled acoustic diesel generator set with electronic governer,6 nos- cylinder,4strokesrated engine speed 1500 rpm, class of governer %u2013 a2 or better,brushless alternator with voltage regulation grade %u2013vg3 and class of insulation %u2013h ,with amf control panel, ip-55 or higher. displayed parameters / features - engine speed, lube oil pressure, coolant /cylinder head temparature, engine running hours, engine battery voltage,. engine running status , generator voltage (ph-ph), generator voltage (ph-n) , generator current (r,y,b)generator apparent power (kva), generator active power (kw), power factor frequency, fuel level, event log, control supply voltage. temperature scanner (rtd, btd) etc. installation - including installation testing and commissioning with foundation making, necessary cabling for connecting between diesel generator set amf panel conforming to cpwd general specification for electrical works, part-vii or latest. warranty-24 months. [ warranty period: 24 months after the date ofdelivery ]

CTN :42058271

09 Oct, 2025 NA

Delhi - Delhi

Tender For supply of material and labour for servicing including opening and refixing after replacing of the items , replacement of fuel filter , replacement of air filter , replacement of oil filter , replacement of engine oil , replacement of coolent , replacement of head light right side , replacement of rear mirror right side , synthetic enamel paint for denting , replacement of wiper blade , replacement of fog light , wheel balancing and allignment , material and labour for dismantling of all wheel assembly and refixing the same after cleaning greasing and setting , taking down fuel tank and refixing after cleaning of tank , repairing and servicing of brakes with replacing rear brake shoe complete set , labour for all patch work for denting and painting on outer body structure with two coat synthetic enamel paint of suitable colour item ser no 9 , material and labour for repairing and functioning of engine radiator fan and refixing after the same , material and labour for replacing shock absorber rear , material and labour for repairing the fuel indicator meter including all accessories and refixing after repairing and cleaning

Central Government/Public Sector

CTN :42089872

05 Nov, 2025 NA

Hoshangabad - Madhya Pradesh

Tender For corrigendum : supply of boron free non chromate type corrosion inhibitor for engine cooling water of alco locomotive conferming to rdso letter no sd. tex.5 dated 09.01.2009 and as permp mi-15 (rev. 6) may 2013 or latest. make- hp powerkool rr or equivalent approved by rdso. (only rdso approved sources to quote for this item) [ warranty period: 30 months afterthe date of delivery ]

CTN :42122286

22 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the

CTN :42093016

09 Oct, 2025 NA

Bathinda - Punjab

Tender For supply of complete vehicle servicing, greasing with replacement of items , engine oil sae 0w16 , air filter , oil filter , petrol filter , coolant , gear oil , spark plug , wiper blade , cabin filter , m and l for dismantling of two door glass channel repairing and replacement of the under mentioned item setting properly and refixing complete , brake pad , brake shoe , caliper pin , caliper grease , master cylinder assy , taking down unserviceable self starter opening checking and replacement of following worn out parts and refixing the same , self armature assy , self pinion , copper bush , solenoid switch , airconditioner system inspection of ac pipe and assembling the same and refixing the same in original position , ac pipe replacement , ac gas 134a , ac fan belt , wheel alignment and wheel balancing with weight filling including submission computerised alignment report all as directed , repair and replacement of the electrical system of the vehicle by replacing the following items all as directed , fog light assy , cabin light assy

Central Government/Public Sector

CTN :42090711

09 Oct, 2025 NA

Kota - Rajasthan

Tender For supply of starter motor 24v dc, 7.5 kw, suitable for greaves cotton make cpcb -ii engine, model -1214tag23 to part no. 105720520055 of 500 kva, 750 v dg set. make-auto- lek or exactly similar. note: this item is to be procured from oem/ authorized dealer only(firms to submit documentary evidence as per above along with offer). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41990589

10 Nov, 2025 NA

Abu Road - Rajasthan

Tender For supply of engine room lamp edison screw type cap 75 volts d.c. x 50 watts to dlw part no.12364022[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]

Central Government/Public Sector

CTN :41979041

16 Oct, 2025 NA

Mysore - Karnataka

Tender For corrigendum : supply of tool kit consisting of 28 items required for overhauling of diesel engine of power cars. details of item is attached at annexure

corporations/Associations/Others

CTN :41915735

08 Oct, 2025 NA

Hubli - Karnataka

Tender For auction sale of scrapped countable items consisting of 6 types,scrapped rubber consisting of flaps & cut tubes.,scrapped tread rubber powder & cut pieces.,scrapped oil/grease barrels dented,scrapped waste/used/burnt engine oil with barrels 210 ltr,scrapped curing bags, envelopes and flaps.,scrapped auto grade-ii,scrapped auto countable items consisting of 6 types.,scrapped auto countable items consisting of 11 types.,scrapped sub-mercible pums,scrapped radial tyres size 1000x20 lot- c,scrapped torned/round tubes with or without neck,scrapped curing bags/envelopes/round,scrapped empty plastic barrels 210 ltr. cap with or without lid,scrapped brake drums all types,building demolished metal item consisting of ms angle,scrapped canopy removed ms metal item,aluminium scrap consisting of sheets

Automotive Engine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others