Latest autostainer machine Tenders | Government autostainer machine Tenders

CTN :45716983

20 Jul, 2026 30.00 Lacs

Anjaw - Arunachal Pradesh

Tender For supply of 3 dof drone stability test jig alongwith propietary software , 2 dof drone stability test jig alongwith propietary software , bldc motor trust bench alongwith propietary software , drone sensor testing equipment , gps testing equipment alongwith propietary software , flight controller assembly programming station , battery charging and testing station , battery repair station , drone service tools , soldering and rework station , esd work benches set of six , 3d printing equipment , propeller balancer , vr drone simulator

Central Government/Public Sector

CTN :45727657

31 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of igbt based 3-phase drive propulsion equipments comprising of traction converters, auxiliary converters, vehicle control units (vcu) for complete three phase locomotive along with physical medium i.e. esd/emd/ofg for multi functional vehicle bus (mvb) to inter-connect all the bus stations as per iec-61375, terminal brackets, bus bar linksand copper braids required for connection between main transformer and traction converters, auxiliary converters, interfacing connectors, cables and cable looms with connectors required for connection from vcu1/2 to sb1/2 panel, traction motor speed sensors, complete assembled and wired panel c fitted with gdriver display unit(s) and interface for both cab, as per following specifications: (i) rdso/2008/el/spec/0071,rev.5 forigbt based 3-phase drive propulsion equipment (ii) clw/es/3/0528 alt-a for tm speed sensor for igbt traction converter (iii) clw/es/3/0138 alt-a for copper braid (iv) clw/es/3/0458 alt.e for control cables (v) clw/es/3/0459 alt.c for screened cables (vi) clw/es/3/0124 alt.'o' for set of connectors. ( vii ) clw/es/3/0240 alt-b for panel c ( without diagnostic terminal ). (viii) rdso modification sheet no.rdso/2012/ms/0413 rev 1 (ix) rdso modification sheet no. rdso/2020/el/ms/0482 rev 1 (x) rdso modification sheet no. rdso/2017/el/ms/0457 rev-0 (xi) all the relevant rdso modification sheets applicable for the sub-components of igbt base 3- phase drive propulsion equipment should be implemented. (xii)clw spec no. clw/es/3/0431 (xiii) special condition of contract against rdso spec.rdso/2008/el/spec/0071 rev.05 (xiv) clw spec no.clw/amc/cd/01 (march 2016). (xv) clw str for manufacturing of driver display (xvi) clw str no. clw/cd&d/str/002 rev-0. make: bhel only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45492853

03 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of switching impulse board , racks power supply board inco spares , servovalve amplifier , diving servocontrol , cpu board set , cpu board set front and rear servo , i o bus interface board , logic 2 3 board , analog input board current , voltage analogic inputs , 4 x channel rs485 module , logic output module , vme io interface board , serial link mother board , module c633 a ssu , logic input module , current analogic , voltage analogic , ventilation fan rack 19 , cpu board set for normal monitoring , esd kit electrostatic sensitive device kit , interface test equipment including laptop software , current test adapter for echosounder , drs1 simulator tool cs 55 , tool set of adaptor seb5900 , 1 wk12 dummy load tool cs 118 , dummy load for sonar beacon

State Government

CTN :45669229

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement of distribution system of various lwss in electrical section silh under esd hpsebl majheen, ed jawalamukhi - muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm (channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect barbed wire (rec sp f 3-1981) half clamp steel tubular poles 9 mtr. long muffs with concerete filling distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm

State Government

CTN :45669225

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement and augmentation of lis bharoli phaseii 1 no tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl noi jawalamukhi - steel tubular poles 10 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6 mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect b001 distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800 mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950 mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm go ab switch unit (11kv, 400a, 25 κα) triple pole o/d type d.o fuse unit boq1 aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr jguros

State Government

CTN :45669228

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to jsv by prov. 11 0.4 kv, 25 kva dtr at village gurer along with ht line in electrical section bharoli under esd hpsebl noi jawalamukhi, ed jawalamukhi - steel tubular poles 9 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) 11 kv xlpe armoured cable (size 3x95 sq. mm) x 2 cables x-arm cl 100x50x5mm, length 600 mm knee bracing set 1100 mm (65x65x6 mm) anchoring assembly for ht suspension assembly for ht haet shrinkable straight through jointing kit cable termination kit x-arm cl 100x50x6mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm (channel iron (100x50x6 mm), length 1270 mm danger plate (250x200x1.6 mm) nuts & bolts off sizes discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) safety & maintenance equipment for line maintenance ci 100x50x5 mm length 2340 mm belt al 50x50x6 mm length 1800 mm aluminium paint supply part of 11/0.4 kv 25 kva distribution sub-station steel tubular poles 9 mtr. long muffs with concerete filling distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800mm x 4 nos] for supporting do fuse unit & go switch half clamp (m.s. flat 50x6 mm) full clamp (m.s flat 50x6 mm) nuts and bolts of various sizes (galvanised coated) aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

State Government

CTN :45663011

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to pump house constructed at jakhota-i (bohal khalsa) under hpshiva project w.r.t. horticulture development block dehra in electrical section bharoli under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of lt line with aaac 7/3.15 (0.323 km), steel tubular poles 8 mtr. long with base plate, steel tubular poles 9 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), lt ab cable [size 4x70+1x70+1x16 sq. mm] x 2 cable, pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), channel iron (75x40x4.8 mm), length 1.50 mtr + 0.2 mtr}, shackle insulator, d-iron, stay set complete, stay wire, earthing set lt complete in all respect, earth knob, half clamp, full clamp, nuts & bolts off sizes, spiral pvc spacer, aluminium paint, red oxide point, supply part of aug. of 63 kva to 100 kva distribution sub-station, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, chain link fencing, angle iron, gate etc. for transformer fencing, 3-ph, 4-wire trivector meter 200/5 a, erection part of lt line, erection charges & transportation charges complete in all respect of lt line, erection part of aug. of 63 kva to 100 kva dtr, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr

State Government

CTN :45663021

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to pump house constructed at jakhota sasan dhanot under hpshiva project w.r.t. horticulture development block dehra in electrical section adhwani under esd hpse - supply part of lt line with aaac 7/3.15 (0.070 km) sasan, steel tubular poles 8 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), shackle insulator, d-iron, stay set complete, stay wire, earth knob, nuts & bolts off sizes, aluminium paint, red oxide point, supply part of lt line with aaac 7/3.15 (0.325 km) dhanot, steel tubular poles 8 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), shackle insulator, d-iron, stay set complete, stay wire, earth knob, nuts & bolts off sizes, aluminium paint, red oxide point, supply part of aug. of 63 kva to 100 kva distribution sub-station sasan, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, surge arrestor 9 kv station, nuts & bolts off sizes, pipe earthing set, 8 swg gi wire for earthing, 3-ph, 4-wire trivector meter 100/5 a, supply part of aug. of 25 kva to 100 kva distribution sub-station dhanot, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, surge arrestor 9 kv station, nuts & bolts off sizes, pipe earthing set, 8 swg gi wire for earthing, 3-ph, 4-wire trivector meter 100/5 a, erection part of lt line sasan, erection charges & transportation charges complete in all respect of lt line, erection part of lt line dhanot, erection charges & transportation charges complete in all respect of lt line, erection part of aug. of 63 kva to 100 kva dtr sasan, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr, erection part of aug. of 25 kva to 100 kva dtr dhanot, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr

State Government

CTN :45669224

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to jsv by prov. 11 0.4 kv, 25 kva dtr at bohal khalsa a w 11 kv ht line in electrical section bharoli under esd hpsebl noi jawalamukhi, ed jawalamukhi - aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) cross-arm {channel iron (100x50x6 mm), length 1270 mm} 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure ai (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect barbed wire (rec sp f 3-1981) half clamp full clamp danger plate (250x200x1.6 mm) nuts & bolts off sizes 2001

State Government

CTN :45558226

24 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenanc

Autostainer Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors