Get complete information related to latest Aux Engine Spares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aux Engine Spares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aux Engine Spares Tenders.
Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tenderer’s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tenderer’s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge
Tender For corrigendum : auction sale of rolling stock - condemned, surplus underaged serviceable wdg3a loco no.13273 (siemens control system) as per annexure. qty as per ds8: 1 no./118.225 mt (approx). (1) sold on as is where is condition, available under the custody of sse/dsl/kjm, as declared vide ds-8 no. 230616 dtd 07.02.2026. (2) location: available at diesel loco shed kjm. temporarily stabled near new washing line wfd end. delivery will be given from shed. (3) delivery by number basis. (4) material- ferrous & non-ferrous composition as per annexure 6(a)/6(b) attached in photos. general condition of loco is as per annexure-6 attached in photos. purchasers should read published depot conditions and survey the material for quantity, location and road approach before bidding to the lot. after bidding no correspondence will be entertained. neighboring undeclared and nfs items shall not be disturbed. (5) hsd/lube oil if found to be either returned to railways or an amount equivalent to the cost as advised by sr.dee/trs/kjm, to be remitted to railways. (6) engine haulage charges for the movement of engines on private account is applicable with consultation with commercial & operating department as advised by sr.dcm/sbc & sr.dom/sbc and siding charges if any are to be paid by the purchaser in addition to the purchase cost of locomotive. the loco number and its ownership will be changed from railways to the name of the purchaser after sale by operating department in fois etc to enable the movement of the loco in dead condition over ir system on request from the purchaser.(7) date of handing over of locomotive to the buyer shall be deemed as delivery date and the locomotive shall be deemed delivered to the buyer. if the buyer so desires, he can get the locomotive serviced and overhauled in railway workshop or diesel shed on payment basis. such repairs will be carried out only after the locomotive has been sold to the buyer i.e after balance sale value payment , sale proceeds have been received and locomotive has been handed over. the cost of such service/repair will be advised by sr.dee/trs/kjm. (8) bidders are allowed to pay balance sale value in instalments as applicable under uniform e-sale conditions and depot conditions i.e, 1 instalment for lots upto rs.5 lakhs and 2 instalments incase of lots exceeding rs.5 lakhs and upto rs.15 lakhs and 3 instalments incase of lots exceeding rs.15 lakhs. but delivery order will be issued only after realization of payment of final instalment. as per our depot condition para 18- delivery will be given on first come first serve basis. (9) prior to balance sale value payment purchaser is requested to coordinate with sr.dee/trs/kjm 9731666450 for the availability of custodian sse/dsl/kjm 9731666474/9731666459/9731666482.
Tender For corrigendum : auction sale of rolling stock - condemned, surplus underaged serviceable wdm3a loco no.16876 (medha control system) as per annexure. qty as per ds8: 1 no./108.594 mt (approx). (1) sold on as is where is condition, available under the custody of sse/dsl/kjm, as declared vide ds-8 no. 230615 dtd 07.02.2026. (2) location: available at diesel loco shed kjm. temporarily stabled near control room/opp. pit wheel lathe. delivery will be given from shed. (3) delivery by number basis. (4) material- ferrous & non-ferrous composition as per annexure 5(a)/5(b) attached in photos. general condition of loco is as per annexure-5 attached in photos. purchasers should read published depot conditions and survey the material for quantity, location and road approach before bidding to the lot. after bidding no correspondence will be entertained. neighboring undeclared and nfs items shall not be disturbed. (5) hsd/lube oil if found to be either returned to railways or an amount equivalent to the cost as advised by sr.dee/trs/kjm, to be remitted to railways. (6) engine haulage charges for the movement of engines on private account is applicable with consultation with commercial & operating department as advised by sr.dcm/sbc & sr.dom/sbc and siding charges if any are to be paid by the purchaser in addition to the purchase cost of locomotive. the loco number and its ownership will be changed from railways to the name of the purchaser after sale by operating department in fois etc to enable the movement of the loco in dead condition over ir system on request from the purchaser.(7) date of handing over of locomotive to the buyer shall be deemed as delivery date and the locomotive shall be deemed delivered to the buyer. if the buyer so desires, he can get the locomotive serviced and overhauled in railway workshop or diesel shed on payment basis. such repairs will be carried out only after the locomotive has been sold to the buyer i.e after balance sale value payment , sale proceeds have been received and locomotive has been handed over. the cost of such service/repair will be advised by sr.dee/trs/kjm. (8) bidders are allowed to pay balance sale value in instalments as applicable under uniform e-sale conditions and depot conditions i.e, 1 instalment for lots upto rs.5 lakhs and 2 instalments incase of lots exceeding rs.5 lakhs and upto rs.15 lakhs and 3 instalments incase of lots exceeding rs.15 lakhs. but delivery order will be issued only after realization of payment of final instalment. as per our depot condition para 18- delivery will be given on first come first serve basis. (9) prior to balance sale value payment purchaser is requested to coordinate with sr.dee/trs/kjm 9731666450 for the availability of custodian sse/dsl/kjm 9731666474/9731666459/9731666482.
Tender For supply of e5063000 spare parts for diesel engine nta 855r - ., spare parts attached as per annexure- 1 for cummins make diesel engine nta-855r having esn:25502752 & 25502944., ., repair, service nta855r diesel engine having esn no 25502752 & 25502944, .
Tender For procurement of of spares of patriot make crane for mh asset - seal oil sl, o ring, o ring, o ring, seal oil sl, o ring, o ring, o ring, o ring back up, o ring, o ring back up, o ring, hose assembly, hose assembly, hose assembly, main aux hydraulic pump, boom pump, swing pump, anti 2 block system (for main & aux)-hyd, fleeting sheave, slew system high pr.filter, slew pump, bushing- lever housing, lever arm-dog, retaining plate, brake band assembly, sheave for pendant block boom hoist, pin sheave 31/2" dia 24" long for pendan, actuator stub plate, pin sheave 31/2" dia for main frame, nyloc washer 4" od, nyloc washer 4" od 31/2"id and 1/8" thic, kit directional control valve, main/ aux hydraulic pump, boom hoist & swing pump(a tandem unit), check valve, gear coupling ( pump drive adapter), regulator valve, hydraulic oil cooler, repair kit of 4 way 3 position tandem, repair kit of rp70 pilot operated relief, repair kit of 4 way 3 position tandem, repair kit of 4 way 3 position tandem, joystick valves, hydraulic valves, pilot dump valve, counter balance valve, pressure reducing valve, radiator, engine, hydraulic tank breather, kit suction filter assembly, bushing lever housing, lever brake band, retaining plate, suction filter, hydraulic oil filter, air intake filter, valve main, valve swing, air filter, pilot valve, joystick valves, winch motor, winch motor, engine oil pressure gauge, 2 pos/ 2 way valve, shuttle valve, gauge, kit , return filter assembly, hydraulic oil pressure guage, drive pinion, swing gear box, hydraulic swing motor, hydraulic swing brake, triple section hydraulic pump, boom hoist winch-include luffing pawl), friction plates for boom winch brake, brake discs, u-cup seal, piston back up ring, brake spring, o-ring, back up washer, o-ring, slew hyd.pre.gauge, o-ring/seal kit, o-ring/seal kit, o ring / seal kit, o ring / seal kit, engine foot throttle, gauge, pilot pressure, hoist selector valve, joy stick pressure gauge, slew hyd. pr. gauge, hand pump, air pressure gauge, eng start valve, engine shutdown valve, foot valve, radiator, cable emergency stop, return filter assembly, kit, suction filter assembly, kit, diesel and hydraulic oil tank gasket, air pressure gauge, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine oil pressure gauge, engine stop cable, water temp.gauge, magnetic pick up, joy stick, main/ auxiliary, joy stick , boom / slew, clamps for main,aux.& boom wire rope, swing brake, limit switch assembly, wiper motor with arm, blade and switch, anti 2 block system ( main & aux. hoist, compressor safety valve, drain valve, horn switch - push type, selector valve, pilot pressure valve, kit hydraulic directional valve, pilot pressure valve, gauge,hyd control - pressure., hydraulic oil cooler, return filter assembly, kit, suction filter assembly, kit, swing gear box, swing drive pinion, swing brake, joy stick, main/ auxiliary, joy stick , boom / slew, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine stop cable
Tender For auction sale of others - dismantlig of abandoned/condemned rcc over head tank at special repair.cdo/ltt diesel engine cutting yard,kurla and sse/wks/ltt special repair office premises. remarks - 1. lot is approachable by pakka road. 2. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 3. lot number is exhibited/painted on the structure. 3. the quantity is worked out on approximate basis. 4. the delivery will be made on lot basis and no part delivery will be allowed. 5 materials like electric wires, fittings & cables and other such kind of materials. available inside the structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian.6. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.7. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser 8. dismantling is permitted uptoground level only.9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. there is movement of vehicles and humans near the tanks. purchaser should barricade the location before dismantling/breaking of tanks.10. the purchaser will be fully responsible if any accident/unusual incident occurs at worksite/place during dismantling. 11. extra precaution to be taken if there are trees near the structure or its branches are spreadover the same.13. train operations and other railway work should not be disturbed/affected.14. after complete removal of pcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery.15. the list & location of rcc tanks are available with stockholder. 16.the purchaser is advised to see the lot site and units before bidding. stock holder- sse(works) cla. qty-1.0 bylot.
Tender For auction sale of new obsolete drop arm (bigg size),new obsolete drop arm (small size),new obsolete splined end all type (small),new obsolete clutch operating lever (small),new obsolete plug expanstion for cyl. block,new obsolete main bearing r/s 1st (hino),new obsolete main brg.c/s u/s-0.50mm (hino),new obsolete crank shaft for bs-iii eng.,new obsolete valve intake (altto*4201911)for cyl.head bs-iii,new obsolete valve intake for cyl.hd bs-iii,new obsolete wheel stud,new obsolete all type rolar cage for gear,new obsolete gear housing,new obsolete splined end (bigg),new obsolete inlake manifold (allu.),new obsolete water outlet albo for hino engine (allu.),new obsolete camshaft,new obsolete msp 2/21,new obsolete msp 1/110 piston ring repair kit,new obsolete front spring,new obsolete diesel filter insert (1.1 liter coil) (mico),new obsolete all type propeler midshaft with nut,new obsolete all type center bearing midshaft,new obsolete copper commutator ring (approx weight : 120 gram per 1 nos),new obsolete brass washer (approx weight : 24 gram per 1 nos),new obsolete track rod washer (copper) (approx weight : 40 gram per 1 nos),new obsolete rem and gide seal of tata break boster (allu.),new obsolete cam shaft bush brass for layland engine
Tender For repair maintenance of e and m services installed at karkardooma court complex, delhi. (sh servicing and overhauling maintenance of various capacity kirloskar make diesel generator set and kirloskar make fire diesel engine installed in karkardooma court complex).