Latest axes Tenders | Government axes Tenders

CTN :42579207

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en

CTN :42707595

15 Dec, 2025 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of k3 7220-000012 mat door 910 x 550 mm , j1 5110000461 handles axes pick head straight 915 mm , k3 7210-000001 towel bath bleached small 112 x 61 cm , k6 7330-001295 parat large stainless steel , k6 7330-001297uc 150 men set tawah with handle

Corporations And Associations And Others

CTN :43133812

17 Dec, 2025 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43133815

17 Dec, 2025 2.38 Lacs

Delhi - Delhi

Tender For supply of different type of items at molarband ward no. 181, central zone - providing and fixing m. s. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. the vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. the vertical members shall be welded to 4 nos. 25x6 mm m. s. flats placed horizontally around the vertical member of the cage. one name plate of 1 mm thick m.s. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered cpwd/ pwd/ any other approved name. the tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. the tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect, supply of hessian cloth, synthetic enamel paint in all shades except black or chocolate shade yellow colour, synthetic enamel paint in all shades except black or chocolate shade green colour, supply of 1 pvc pipe with nylone braided in good quality as per direction of officer-in-charge, supply of bamboo broom with wooden handle in standared size & banded by iron ring, supply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max

CTN :43133826

31 Dec, 2025 NA

Kamrup - Assam

Tender For supply and installation of gantry 3-axes cnc with servo motor actuator

Central Government/Public Sector

CTN :43139045

01 Jan, 2026 NA

Koraput - Odisha

Tender For supply of 4 axes immersion ultrasonic testing equipment

CTN :43144917

05 Jan, 2026 NA

Nagpur - Maharashtra

Tender For supply of mechanical tools testers and equipments--axes pick , can lubricating 200ml , tool box , drift copper , pad lock , abs based tool box , saw hand , rivnut squeezer , scissors , screw driver instrument maker set , showel gs , set hammer , spads with handle , loud hailer with cell , allen key , portable electric drilling machine

Central Government/Public Sector

CTN :43126189

19 Dec, 2025 10.00 Lacs

Medak-T - Telangana

Tender For servicing of integrated spindle of liechti g-mill twin cnc 5-axes machine

CTN :42992283

13 Dec, 2025 2.00 Lacs

Agra - Uttar Pradesh

Tender For corrigendum : supply of general stores and clothing : : -handle axes pick head straight 915mm , open two sided spanner 21 x 23 , de spanner 24 x 26 metric , chaugal universal mk-2 , axes pick head 2 kgs , funnel fuel garage pattern , brushes flat paint 25mm tapered nylon , brushes paints and varnishes flat 50mm

CTN :42916571

16 Dec, 2025 5.70 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of workshop tools and consumables items at sstps, suratgarh. - revolving center (with tip) standard, type mt-5, revolving center (with tip) standard, type mt-4, grinding wheel (green), 150 x 25 x 31.75 mm gc-60 medium, grinding wheel (white), 150 x 13 x 31.75 mm aa-60-ks-v8 fine, grinding wheel (black), 150 x 25 x 31.75 a-24 coarse, screw pitch gauge, whiteworth 550, metric 600, vernier calliper 150mm, vernier calliper 300mm, file flat (basteard cut),, 12"file flat (smooth), 12", file flat (smooth), 12", hss reguler power, hacksaw blade, size:, 18"×1.5"×0.062"; 16g × 10 tpi, file round 10" (2nd cut), file round 6" (2nd cut), file tringular 6" (2nd cut), file knife edge 2nd cut 6", low alloy carbon power hacksaw blade, size, boaring tool holder, boaring tool holder size 14mm, boaring tool holder size 50mm, boaring tool dimond (cnc) 14mm (bit), boaring tool dimond (cnc) 20mm (bit), boaring tool dimond (cnc) 30mm (bit), boaring tool dimond (cnc) 40mm (bit), boaring tool dimond (cnc) 60mm (bit), hss square tool bit blanks, grade s-400 (m 35 sq), bit, hss square tool bit blanks, grade s-400 (m 35 sq), bit, hss square tool bit blanks, grade s-400 (m 35 sq), bit, hss square tool bit blanks, grade s-400 (m 35 sq), bit, hss square tool bit blanks, grade s-400 (t 42 sq), bit, ms drill sleeve / socket, (1-2) mt, ms drill sleeve / socket, (2-3) mt, ms drill sleeve / socket, (3-4) mt, ms drill sleeve / socket, (4-5) mt, ms drill sleeve / socket, (5-6) mt, ms drill sleeve / socket, (6-7) mt, ms drill sleeve / socket, (7-8) mt, drill chuck 13mm, drill chuck 16mm, sew drill chuck (model 013 mm0, size: 0 to 1/2", hss straight shank ground flute twist drill conforming to is 5101 size : 1.00mm, hss straight shank ground flute twist drill conforming to is 5101 size : 2.00mm, hss straight shank ground flute twist drill conforming to is 5101size : 2.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 3.00mm, hss straight shank ground flute twist drill conforming to is 5101 size : 3.2mm, hss straight shank ground flute twist drill conforming to is 5101 size : 3.25mm, hss straight shank ground flute twist drill conforming to is 5101 size : 3.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 4.0, hss straight shank ground flute twist drill conforming to is 5101 size : 4.2mm, hss straight shank ground flute twist drill conforming to is 5101 size : 4.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 5.0mm, hss straight shank ground flute twist drill conforming to is 5101 size : 5.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 5..75mm, hss straight shank ground flute twist drill conforming to is 5101 size: 6.0, hss straight shank ground flute twist drill conforming to is 5101 size : 6.3mm, hss straight shank ground flute twist drill conforming to is 5101 size: 6.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 6.75mm, hss straight shank ground flute twist drill conforming to is 5101 size : 7.00mm, hss straight shank ground flute twist drill conforming to is 5101 size : 7.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 8.0, hss straight shank ground flute twist drill conforming to is 5101 size : 8.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 9.0mm, hss straight shank ground flute twist drill conforming to is 5101 size : 9.5mm, hss straight shank ground flute twist drill conforming to is 5101 size : 11.0mm, hss taper shank ground flute twist drill conforming to is 5101 size : 17.0mm, hss taper shank ground flute twist drill conforming to is 5101 size : 17.5, hss taper shank ground flute twist drill conforming to is 5101 size : 21.0mm, hss taper shank ground flute twist drill conforming to is 5101 size : 21.5mm, hss taper shank ground flute twist drill conforming to is 5101 size : 23.0mm, hss taper shank ground flute twist drill confo

Axes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector